Top

Published in:

2023 | OriginalPaper | Chapter

Comparison of Thermal Efficiency and Heat Transfer Rate on the Fluidized-Bed Combustor Using Oil Palm Fuel

Authors : Muhammad Faisal, Erdiwansyah, Muhtadin, Mahidin, Asri Gani, Mahyuddin, Rizalman Mamat, Mohd Fairusham Ghazali, Bukhari Manshoor

Published in: Proceedings of the 2nd Energy Security and Chemical Engineering Congress

Publisher: Springer Nature Singapore

Activate our intelligent search to find suitable subject content or patents.

search-config

AI-assisted search

Off

Abstract

Waste in oil palm biomass is one of the renewable energy sources that can be converted into energy. The availability of oil palm biomass which is a renewable energy source is currently very adequate. This research will specifically analyze the differences in the level of thermal efficiency and heat transfer rates of two different types of biomasses. In addition, this comparative analysis was also carried out when testing the modification of the perforated plate with the standard plate or without modification. The combustion test was carried out in a fluidized-bed combustor (FBC) combustion chamber with data measurements using a Digital Thermometer brand Hot-Temp HT-306. Palm oil solid waste biomass such as palm kernel shells and oil palm fronds were used as testing fuel in this study. The results show that the average level of thermal efficiency for palm kernel shell (PKS) and oil palm midrib (OPM) fuels, when tested with a modified hollow plate, is 33.59% and 28.31%, respectively. Meanwhile, the results of the average thermal efficiency at the time of testing the standard plate were 19.77% PKS and 28.29% OPM. The results of the heat transfer rate test for standard plates with PKS fuel are 7363.53 W/m², which is lower than after modification, which is 7762.38 W/m². Meanwhile, the results of combustion using OPM fuel were higher when testing the standard plate at 7289.84 W/m² compared to 7162.81 W/m² when testing with a modified perforated plate. Overall, testing with the application of modified perforated plates can increase the thermal efficiency and heat transfer rate in the FBC chamber.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

inform now

previous chapter Tribological Performance Effect of SiO2 and TiO2 Nanoparticles as Lubricating Oil Additives

next chapter Performance Optimization of Low Proportion Biodiesel Blend on Marine Diesel Engine Using Response Surface Method

Erdiwansyah E, Mahidin M, Husin H, Nasaruddin N, Khairil K, Zaki M, Jalaluddin J (2021) Investigation of availability, demand, targets, and development of renewable energy in 2017–2050: a case study in Indonesia. Int J Coal Sci Technol 1–17

Erdiwansyah MR, Sani, MSM, Sudhakar K (2019) Renewable energy in southeast Asia: policies and recommendations. Sci Total Environ. https://doi.org/10.1016/j.scitotenv.2019.03.273

Erdiwansyah M, Mamat R, Sani MSM, Khoerunnisa F, Kadarohman A (2019) Target and demand for renewable energy across 10 ASEAN countries by 2040. Electr J 32:106670 (2019). https://doi.org/10.1016/J.TEJ.2019.106670

Erdiwansyah M, Husin H, Nasaruddin, Zaki M, Muhibbuddin (2021) A critical review of the integration of renewable energy sources with various technologies. Prot Control Mod Power Syst 6:3. https://doi.org/10.1186/s41601-021-00181-3

Salame C-T, Aillerie M, Papageorgas P, Perilhon C, Haider A, Vokas G, Shaban A, Jabur A (2019) Preface: technologies and materials for renewable energy, environment and sustainability. Energy Procedia 157:1. https://doi.org/10.1016/j.egypro.2018.11.156

Shan S, Genç SY, Kamran HW, Dinca G (2021) Role of green technology innovation and renewable energy in carbon neutrality: a sustainable investigation from Turkey. J Environ Manage 294:113004. https://doi.org/10.1016/j.jenvman.2021.113004

Suman A (2021) Role of renewable energy technologies in climate change adaptation and mitigation: a brief review from Nepal. Renew Sustain Energy Rev 151:111524. https://doi.org/10.1016/j.rser.2021.111524

Masukujjaman M, Alam SS, Siwar C, Halim SA (2021) Purchase intention of renewable energy technology in rural areas in Bangladesh: Empirical evidence. Renew Energy 170:639–651. https://doi.org/10.1016/j.renene.2021.01.125

Oryani B, Koo Y, Rezania S, Shafiee A (2021) Barriers to renewable energy technologies penetration: perspective in Iran. Renew Energy 174:971–983. https://doi.org/10.1016/j.renene.2021.04.052

10.

Pina EA, Lozano MA, Serra LM (2021) Assessing the influence of legal constraints on the integration of renewable energy technologies in polygeneration systems for buildings. Renew Sustain Energy Rev 149:111382. https://doi.org/10.1016/j.rser.2021.111382

11.

Chen C, Hu Y, Karuppiah M, Kumar PM (2021) Artificial intelligence on economic evaluation of energy efficiency and renewable energy technologies. Sustain Energy Technol Assessments 47:101358. https://doi.org/10.1016/j.seta.2021.101358

12.

Anyaoha KE, Zhang L (2021) Renewable energy for environmental protection: Life cycle inventory of Nigeria’s palm oil production. Resour Conserv Recycl 174:105797. https://doi.org/10.1016/j.resconrec.2021.105797

13.

Shahidul MI, Malcolm ML, Begum S, Hashmi MSJ, Islam MS, Eugene JJ (2020) Renewable energy production from environmental hazardous palm oil mill waste materials: a review

14.

Mahidin S, Erdiwansyah, Hamdani, Hisbullah, Hayati AP, Zhafran M, Sidiq MA, Rinaldi A, Fitria B, Tarisma R, Bindar Y (2020) Analysis of power from palm oil solid waste for biomass power plants: a case study in Aceh Province. Chemosphere 126714. https://doi.org/10.1016/j.chemosphere.2020.126714

15.

Mahidin M, Erdiwansyah E, Husin H, Hisbullah H, Hayati AP, Zhafran M, Sidiq MA, Rinaldi A, Fitria B, Tarisma R (2020) Utilization of oil palm biomass as a renewable and sustainable energy source in Aceh Province. J Adv Res Fluid Mech Therm Sci 67:97–108

16.

Cai T, Becker SM, Cao F, Wang B, Tang A, Fu J, Han L, Sun Y, Zhao D (2021) NOx emission performance assessment on a perforated plate-implemented premixed ammonia-oxygen micro-combustion system. Chem Eng J 417:128033. https://doi.org/10.1016/j.cej.2020.128033

17.

Wei H, Li, K, Zhao J, Zhou L (2020) Experimental investigation on the propagation of flow and flame in a confined combustion chamber equipped with a single-hole perforated plate. Int J Hydrogen Energy 45:32589–32597. https://doi.org/10.1016/j.ijhydene.2020.08.285

18.

Zhou L, Gao D, Zhao J, Wei H, Zhang X, Xu Z, Chen R (2018) Turbulent flame propagation with pressure oscillation in the end gas region of confined combustion chamber equipped with different perforated plates. Combust Flame 191:453–467. https://doi.org/10.1016/j.combustflame.2018.01.023

19.

Wei H, Zhao J, Zhou L (2019) The mechanism of flame propagation affected by flow/shock wave in a confined combustion chamber equipped with a perforated plate. Int J Hydrogen Energy 44:7675–7683. https://doi.org/10.1016/j.ijhydene.2019.01.217

20.

Oh S, Shin Y, Kim Y (2016) Stabilization effects of perforated plates on the combustion instability in a lean premixed combustor. Appl Therm Eng 107:508–515. https://doi.org/10.1016/j.applthermaleng.2016.06.143

21.

Wei H, Gao D, Zhou L, Feng D, Chen R (2017) Different combustion modes caused by flame-shock interactions in a confined chamber with a perforated plate. Combust Flame 178:277–285. https://doi.org/10.1016/j.combustflame.2017.01.011

22.

Ng HD, Chao J, Ju Y, Lee JHS (2008) Combustion regimes subsequent to the reflection of a detonation from a perforated plate. Commun Nonlinear Sci Numer Simul 13:243–247. https://doi.org/10.1016/j.cnsns.2006.03.018

23.

Noiray N, Durox D, Schuller T, Candel S (2007) Passive control of combustion instabilities involving premixed flames anchored on perforated plates. Proc Combust Inst 31:1283–1290. https://doi.org/10.1016/j.proci.2006.07.096

24.

Hani MR, Mahidin M, Husin H, Khairil K, Hamdani H, Erdiwansyah E, Hisbullah H, Faisal M, Mahyudin M, Muhtadin M (2020) Experimental studies on combustion characteristics of oil palm biomass in fluidized-bed: a heat energy alternative. J Adv Res Fluid Mech Therm Sci 68:9–28

25.

Holman JP (1988) Perpindahan Kalor (terjemahan E. Jasfi). Jakarta Penerbit Erlangga. (Buku Asli 1986)

26.

Erdiwansyah M, Husin H, Nasaruddin, Muhtadin, Faisal M, Gani A, Usman, Mamat R (2021) Combustion efficiency in a fluidized-bed combustor with a modified perforated plate for air distribution

27.

Erdiwansyah M, Husin H, Faisal M, Muhtadin Gani A, Sardjono RE, Mamat R (2021) The modification of the perforated plate in the fluidized-bed combustor to analyze heat convection rate and temperature. J Combust 2021:4084162. https://doi.org/10.1155/2021/4084162

Title: Comparison of Thermal Efficiency and Heat Transfer Rate on the Fluidized-Bed Combustor Using Oil Palm Fuel
Authors: Muhammad Faisal
Erdiwansyah
Muhtadin
Mahidin
Asri Gani
Mahyuddin
Rizalman Mamat
Mohd Fairusham Ghazali
Bukhari Manshoor
Publisher: Springer Nature Singapore
Book: Proceedings of the 2nd Energy Security and Chemical Engineering Congress
Print ISBN: 978-981-19-4424-6

Electronic ISBN: 978-981-19-4425-3

Copyright Year: 2023
DOI: https://doi.org/10.1007/978-981-19-4425-3_21