Top

International Journal of Material Forming

Published in:

04-09-2021 | Review

Composite preforming defects: a review and a classification

Authors: Rym Azzouz, Samir Allaoui, Raphael Moulart

Published in: International Journal of Material Forming | Issue 6/2021

Activate our intelligent search to find suitable subject content or patents.

search-config

AI-assisted search

Off

Abstract

Advancing in the process of extending the use of composites for structural parts applications, it is inevitable to work on complex shapes. That is the main reason why understanding the complex forming mechanisms and the factors put into play during the process of composite materials is a major interest for both pre-impregnated forming and dry fabric preforming. Thus, the appearance of defects is a major concern and predicting their appearance for optimal product quality is the priority. A great number of authors showed that defects degrade the overall performance of the composite by creating local heterogeneities. Many factors can initiate these defects. This article is an assembly of the development of the literature on this subject. It is an attempt to provide a description for each defect and a classification order following the scale, the behavior mechanisms, the appearance plan. This will help to converge toward an identification of the defects manifesting during the composite forming.

previous article Control and optimization of bulge defect in incremental forming of cu-Al bimetal

next article Stamped part classification and automatic dieface design

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

inform now

Paul SK (2013) Theoretical analysis of strain- and stress-based forming limit diagrams. J Strain Anal Eng Des 48(3):177–188. https://doi.org/10.1177/0309324712468524CrossRef

Harrison P, Gomes R, Curado-Correia N (2013) Press forming a 0/90 cross-ply advanced thermoplastic composite using the double-dome benchmark geometry. Compos Part A Appl Sci Manuf 54:56–69. https://doi.org/10.1016/j.compositesa.2013.06.014CrossRef

Wang P, Hamila N, Boisse P (2013) Thermoforming simulation of multilayer composites with continuous fibres and thermoplastic matrix. Compos Part B Eng 52:127–136. https://doi.org/10.1016/j.compositesb.2013.03.045CrossRef

Skordos AA, Monroy Aceves C, Sutcliffe MPF (2007) A simplified rate dependent model of forming and wrinkling of pre-impregnated woven composites. Compos Part A Appl Sci Manuf 38(5):1318–1330. https://doi.org/10.1016/j.compositesa.2006.11.005CrossRef

Allaoui S, Cellard C, Hivet G (2015) Effect of inter-ply sliding on the quality of multilayer interlock dry fabric preforms. Compos Part A Appl Sci Manuf 68:336–345. https://doi.org/10.1016/j.compositesa.2014.10.017CrossRef

Allaoui S, Boisse P, Chatel S, Hamila N, Hivet G, Soulat D, Vidal-Salle E (2011) Experimental and numerical analyses of textile reinforcement forming of a tetrahedral shape. Compos Part A Appl Sci Manuf 42(6):612–622. https://doi.org/10.1016/j.compositesa.2011.02.001CrossRef

Lee JS, Hong SJ, Yu WR, Kang TJ (2007) The effect of blank holder force on the stamp forming behavior of non-crimp fabric with a chain stitch. Compos Sci Technol 67(3-4):357–366. https://doi.org/10.1016/j.compscitech.2006.09.009CrossRef

Turk MA, Vermes B, Thompson AJ, Belnoue JPH, Hallett SR, Ivanov DS (2020) Mitigating forming defects by local modification of dry preforms mark. Compos Part A Appl Sci Manuf 128:105643. https://doi.org/10.1016/j.compositesa.2019.105643CrossRef

Nosrat Nezami F, Gereke T, Cherif C (2017) Active forming manipulation of composite reinforcements for the suppression of forming defects. Compos Part A Appl Sci Manuf 99:94–101. https://doi.org/10.1016/j.compositesa.2017.04.011CrossRef

10.

Molnár P, Ogale A, Lahr R, Mitschang P (2007) Influence of drapability by using stitching technology to reduce fabric deformation and shear during thermoforming. Compos Sci Technol 67(15-16):3386–3393. https://doi.org/10.1016/j.compscitech.2007.03.022CrossRef

11.

Hao S, Wang P, Legrand X et al (2019) Influence of the tufting pattern on the formability of tufted multi-layered preforms. Compos Struct 228:111356. https://doi.org/10.1016/j.compstruct.2019.111356CrossRef

12.

Haorong LI, Gutowski T (1997) Chapter 11 the forming of thermoset composites. Compos Mater Ser 11:441–472. https://doi.org/10.1016/S0927-0108(97)80013-6CrossRef

13.

Viisainen JV, Hosseini A, Sutcliffe MPF (2021) Experimental investigation, using 3D digital image correlation, into the effect of component geometry on the wrinkling behaviour and the wrinkling mechanisms of a biaxial NCF during preforming. Compos Part A Appl Sci Manuf 142:106248. https://doi.org/10.1016/j.compositesa.2020.106248CrossRef

14.

El Said B, Green S, Hallett SR (2014) Kinematic modelling of 3D woven fabric deformation for structural scale features. Compos Part A Appl Sci Manuf 57:95–107. https://doi.org/10.1016/j.compositesa.2013.11.006CrossRef

15.

Tavana R, Najar SS, Abadi MT, Sedighi M (2013) Meso/macro-scale finite element model for forming process of woven fabric reinforcements. J Compos Mater 47(17):2075–2085. https://doi.org/10.1177/0021998312454034CrossRef

16.

Sherwood JA, Fetfatsidis KA, Gorczyca JL, Berger L (2012) Fabric thermostamping in polymer matrix composites. In: Fabric thermostamping in polymer matrix composites. Woodhead Publishing LimitedCrossRef

17.

Dörr D, Joppich T, Schirmaier F, et al (2016) A Method for validation of finite element forming simulation on basis of a pointwise comparison of distance and curvature 170011:. https://doi.org/10.1063/1.4963567

18.

Dörr D, Brymerski W, Ropers S, Leutz D, Joppich T, Kärger L, Henning F (2017) A benchmark study of finite element codes for forming simulation of thermoplastic UD-Tapes. Procedia CIRP 66:101–106. https://doi.org/10.1016/j.procir.2017.03.223CrossRef

19.

Boisse P, Hamila N, Vidal-sallé E, Dumont F (2011) Simulation of wrinkling during textile composite reinforcement forming. Influence of tensile , in-plane shear and bending stiffnesses. Compos Sci Technol 71(5):683–692. https://doi.org/10.1016/j.compscitech.2011.01.011CrossRef

20.

Hallett SR, Belnoue JPH, Nixon-Pearson OJ, et al (2016) Understanding and prediction of fibre waviness defect generation. Proc am Soc compos - 31st tech Conf ASC 2016

21.

Khan MA, Mabrouki T, Vidal-Sallé E, Boisse P (2010) Numerical and experimental analyses of woven composite reinforcement forming using a hypoelastic behaviour. Application to the double dome benchmark. J Mater Process Technol 210(2):378–388. https://doi.org/10.1016/j.jmatprotec.2009.09.027CrossRef

22.

Bloom LD, Wang J, Potter KD (2013) Damage progression and defect sensitivity: an experimental study of representative wrinkles in tension. Compos Part B Eng 45(1):449–458. https://doi.org/10.1016/j.compositesb.2012.05.021CrossRef

23.

El-Hajjar RF, Petersen DR (2011) Gaussian function characterization of unnotched tension behavior in a carbon/epoxy composite containing localized fiber waviness. Compos Struct 93(9):2400–2408. https://doi.org/10.1016/j.compstruct.2011.03.029CrossRef

24.

Wang J, Potter KD, Hazra K, Wisnom MR (2012) Experimental fabrication and characterization of out-of-plane fiber waviness in continuous fiber-reinforced composites. J Compos Mater 46(17):2041–2053. https://doi.org/10.1177/0021998311429877CrossRef

25.

Mukhopadhyay S, Jones MI, Hallett SR (2015) Tensile failure of laminates containing an embedded wrinkle; numerical and experimental study. Compos Part A Appl Sci Manuf 77:219–228. https://doi.org/10.1016/j.compositesa.2015.07.007CrossRef

26.

Xu X, Jones MI, Ali H, Wisnom MR, Hallett SR (2020) Effect of out-of-plane wrinkles in curved multi-directional carbon/epoxy laminates. Compos Sci Technol 197:108282. https://doi.org/10.1016/j.compscitech.2020.108282CrossRef

27.

Xie N, Smith RA, Mukhopadhyay S, Hallett SR (2018) A numerical study on the influence of composite wrinkle defect geometry on compressive strength. Mater Des 140:7–20. https://doi.org/10.1016/j.matdes.2017.11.034CrossRef

28.

Mukhopadhyay S, Nixon-Pearson OJ, Hallett SR (2018) An experimental and numerical study on fatigue damage development in laminates containing embedded wrinkle defects. Int J Fatigue 107:1–12. https://doi.org/10.1016/j.ijfatigue.2017.10.008CrossRef

29.

Nikishkov Y, Makeev A, Seon G (2013) Progressive fatigue damage simulation method for composites. Int J Fatigue 48:266–279. https://doi.org/10.1016/j.ijfatigue.2012.11.005CrossRef

30.

Potter K, Khan B, Wisnom M, Bell T, Stevens J (2008) Variability, fibre waviness and misalignment in the determination of the properties of composite materials and structures. Compos Part A Appl Sci Manuf 39(9):1343–1354. https://doi.org/10.1016/j.compositesa.2008.04.016CrossRef

31.

Fedulov BN, Antonov FK, Safonov AA, Ushakov AE, Lomov SV (2015) Influence of fibre misalignment and voids on composite laminate strength. J Compos Mater 49(23):2887–2896. https://doi.org/10.1177/0021998314557533CrossRef

32.

Creech G, Pickett AK (2006) Meso-modelling of non-crimp fabric composites for coupled drape and failure analysis. J Mater Sci 41(20):6725–6736. https://doi.org/10.1007/s10853-006-0213-6CrossRef

33.

Tam AS, Gutowski TG (1990) The kinematics for forming ideal aligned fibre composites into complex shapes. Compos Manuf 1(4):219–228. https://doi.org/10.1016/0956-7143(90)90044-WCrossRef

34.

Christie GR, Collins IF, Bhattacharyya D (1995) Out-of-plane buckling of fiber-reinforced thermoplastic sheets under homogeneous biaxial conditions. J Appl Mech Trans ASME 62(4):834–840. https://doi.org/10.1115/1.2896008CrossRefMATH

35.

Pavan Kumar J, Uday Kumar R, Ramakrishna B et al (2018) Formability of sheet metals - a review. IOP Conf Ser Mater Sci Eng 455. https://doi.org/10.1088/1757-899X/455/1/012081

36.

Yu JZ, Cai Z, Ko FK (1994) Formability of textile preforms for composite applications. Part 1: characterization experiments. Compos Manuf 5(2):113–122. https://doi.org/10.1016/0956-7143(94)90062-0CrossRef

37.

Mohammed U, Lekakou C, Bader MG (2000) Experimental studies and analysis of the draping of woven fabrics. Compos Part A Appl Sci Manuf 31(12):1409–1420. https://doi.org/10.1016/S1359-835X(00)00080-4CrossRef

38.

Boisse P, Gasser A, Hivet G (2001) Analysis of the mechanical behaviour : determination of the biaxial tensio-strain surfaces and their use in forming simulations. Exp Mech 32:260–269

39.

Zouari B, Daniel J, Boisse P (2006) A woven reinforcement forming simulation method. Influence of the shear stiffness To cite this version : HAL Id : hal-00081069 A woven reinforcement forming simulation method. Influence of the shear stiffness

40.

Komeili M, Milani AS (2016) On effect of shear-tension coupling in forming simulation of woven fabric reinforcements. Compos Part B Eng 99:17–29. https://doi.org/10.1016/j.compositesb.2016.05.004CrossRef

41.

Boisse P, Hamila N, Vidal-Sallé E, Dumont F (2011) Simulation of wrinkling during textile composite reinforcement forming. Influence of tensile, in-plane shear and bending stiffnesses. Compos Sci Technol 71(5):683–692. https://doi.org/10.1016/j.compscitech.2011.01.011CrossRef

42.

de Bilbao E, Soulat D, Hivet G, Gasser A (2010) Experimental study of bending behaviour of reinforcements. Exp Mech 50(3):333–351. https://doi.org/10.1007/s11340-009-9234-9CrossRef

43.

Boisse P, Colmars J, Hamila N, Naouar N, Steer Q (2018) Bending and wrinkling of composite fiber preforms and prepregs. A review and new developments in the draping simulations. Compos Part B Eng 141:234–249. https://doi.org/10.1016/j.compositesb.2017.12.061CrossRef

44.

Dangora LM, Mitchell CJ, Sherwood JA (2015) Predictive model for the detection of out-of-plane defects formed during textile-composite manufacture. Compos Part A Appl Sci Manuf 78:102–112. https://doi.org/10.1016/j.compositesa.2015.07.011CrossRef

45.

Allaoui S, Hivet G, Soulat D, Wendling A, Ouagne P, Chatel S (2014) Experimental preforming of highly double curved shapes with a case corner using an interlock reinforcement. Int J Mater Form 7(2):155–165. https://doi.org/10.1007/s12289-012-1116-5CrossRef

46.

Long AC, Rudd CD (1994) A simulation of reinforcement deformation during the production of preforms for liquid moulding processes. Proc Inst Mech Eng Part B J Eng Manuf 208(4):269–278. https://doi.org/10.1243/PIME_PROC_1994_208_088_02CrossRef

47.

Wang J, Paton R, Page JR (1999) Draping of woven fabric preforms and prepregs for production of polymer composite components. Compos Part A Appl Sci Manuf 30(6):757–765. https://doi.org/10.1016/S1359-835X(98)00187-0CrossRef

48.

Böhler P, Härtel F, Middendorf P (2013) Identification of forming limits for unidirectional carbon textiles in reality and mesoscopic simulationy and mesoscopic simulation. Key Eng Mater 554–557:423–432. https://doi.org/10.4028/www.scientific.net/KEM.554-557.423CrossRef

49.

Middendorf P Process parameter studies and comparison of. 7577–7587

50.

Alshahrani H, Hojjati M (2017) Experimental and numerical investigations on formability of out-of-autoclave thermoset prepreg using a double diaphragm process. Compos Part A Appl Sci Manuf 101:199–214. https://doi.org/10.1016/j.compositesa.2017.06.021CrossRef

51.

Chen S, McGregor OPL, Endruweit A et al (2017) Double diaphragm forming simulation for complex composite structures. Compos Part A Appl Sci Manuf 95:346–358. https://doi.org/10.1016/j.compositesa.2017.01.017CrossRef

52.

ÓBrádaigh CM, McGuinness GB, Pipes RB (1993) Numerical analysis of stresses and deformations in composite materials sheet forming: central indentation of a circular sheet. Compos Manuf 4(2):67–83. https://doi.org/10.1016/0956-7143(93)90074-ICrossRef

53.

Fetfatsidis KA, Jauffrès D, Sherwood JA, Chen J (2013) Characterization of the tool/fabric and fabric/fabric friction for woven-fabric composites during the thermostamping process. Int J Mater Form 6(2):209–221. https://doi.org/10.1007/s12289-011-1072-5CrossRef

54.

Harrison P, ten Thije R, Akkerman R, Long AC (2010) Characterisation and modelling friction at the tool-ply interface for thermoplastic woven composites. 1–2

55.

ten Thije RHW, Akkerman R, van der Meer L, Ubbink MP (2008) Tool-ply friction in thermoplastic composite forming. Int J Mater Form 1(S1):953–956. https://doi.org/10.1007/s12289-008-0215-9CrossRef

56.

Laroche D V-KT (1993) forming of woven fabric composites. 1825–1839

57.

Hallander P, Akermo M, Mattei C, Petersson M, Nyman T (2013) An experimental study of mechanisms behind wrinkle development during forming of composite laminates. Compos Part A Appl Sci Manuf 50:54–64. https://doi.org/10.1016/j.compositesa.2013.03.013CrossRef

58.

Thor M, Sause MGR, Hinterhölzl RM (2020) Mechanisms of origin and classification of out-of-plane Fiber waviness in composite materials—a review. J Compos Sci 4(3):130. https://doi.org/10.3390/jcs4030130CrossRef

59.

Li L, Zhao Y, Zhao X, et al (2015) The effect of preforming quality on the permeability of non-crimp fabrics and the mechanical properties of their composites. ICCM Int Conf Compos Mater 2015-July:19–24

60.

Bel S, Boisse P, Dumont F (2012) Analyses of the deformation mechanisms of non-crimp fabric composite reinforcements during preforming. Appl Compos Mater 19(3-4):513–528. https://doi.org/10.1007/s10443-011-9207-xCrossRef

61.

Bel S, Hamila N, Boisse P, Dumont F (2012) Finite element model for NCF composite reinforcement preforming: importance of inter-ply sliding. Compos Part A Appl Sci Manuf 43(12):2269–2277. https://doi.org/10.1016/j.compositesa.2012.08.005CrossRef

62.

Daniel J-L, Soulat D, Dumont F, Zouari B, Boisse P, Long AC (2003) Forming of a very unbalanced fabric experiment and simulation. Int J Form Process 6(3-4):465–480. https://doi.org/10.3166/ijfp.6.465-480CrossRef

63.

Gatouillat S, Bareggi A, Vidal-Sallé E, Boisse P (2013) Meso modelling for composite preform shaping - simulation of the loss of cohesion of the woven fibre network. Compos Part A Appl Sci Manuf 54:135–144. https://doi.org/10.1016/j.compositesa.2013.07.010CrossRef

64.

Boisse P, Hamila N, Madeo A (2016) Modelling the development of defects during composite reinforcements and prepreg forming. Philos Trans R Soc A Math Phys Eng Sci 374(2071). https://doi.org/10.1098/rsta.2015.0269

65.

Tephany C, Gillibert J, Ouagne P, Hivet G, Allaoui S, Soulat D (2016) Development of an experimental bench to reproduce the tow buckling defect appearing during the complex shape forming of structural flax based woven composite reinforcements. Compos Part A Appl Sci Manuf 81:22–33. https://doi.org/10.1016/j.compositesa.2015.10.011CrossRef

66.

Tam AS, Gutowski TG (1989) Ply-slip during the forming of thermoplastic composite parts. J Compos Mater 23(6):587–605. https://doi.org/10.1177/002199838902300604CrossRef

67.

Dodwell TJ, Butler R, Hunt GW (2014) Out-of-plane ply wrinkling defects during consolidation over an external radius. Compos Sci Technol 105:151–159. https://doi.org/10.1016/j.compscitech.2014.10.007CrossRef

68.

Belnoue JPH, Nixon-Pearson OJ, Thompson AJ, Ivanov DS, Potter KD, Hallett SR (2018) Consolidation-driven defect generation in thick composite parts. J Manuf Sci Eng Trans ASME 140(7). https://doi.org/10.1115/1.4039555

69.

Rashidi A, Belnoue JPH, Thompson AJ, Hallett SR, Milani AS (2021) Consolidation-driven wrinkling in carbon/epoxy woven fabric prepregs: an experimental and numerical study. Compos Part A Appl Sci Manuf 143:106298. https://doi.org/10.1016/j.compositesa.2021.106298CrossRef

70.

Cattanach JB, Guff G, Cogswell FN The processing of thermoplastics containing high. 345–362

71.

Jerpdal L, Åkermo M, Ståhlberg D, Herzig A (2018) Process induced shape distortions of self-reinforced poly (ethylene terephthalate) composites. Compos Struct 193:29–34. https://doi.org/10.1016/j.compstruct.2018.03.038CrossRef

72.

Hubert P, Poursartip A (2001) Aspects of the compaction of composite angle laminates: an experimental investigation. J Compos Mater 35(1):2–26. https://doi.org/10.1106/X8D7-PR9V-U6F2-0JEKCrossRef

73.

Levy A, Hubert P (2019) Vacuum-bagged composite laminate forming processes: predicting thickness deviation in complex shapes. Compos Part A Appl Sci Manuf 126:105568. https://doi.org/10.1016/j.compositesa.2019.105568CrossRef

74.

Netzel C, Mordasini A, Schubert J, Allen T, Battley M, Hickey CMD, Hubert P, Bickerton S (2021) An experimental study of defect evolution in corners by autoclave processing of prepreg material. Compos Part A Appl Sci Manuf 144:106348. https://doi.org/10.1016/j.compositesa.2021.106348CrossRef

75.

Hallander P, Sjölander J, Petersson M, Åkermo M (2016) Interface manipulation towards wrinkle-free forming of stacked UD prepreg layers. Compos Part A Appl Sci Manuf 90:340–348. https://doi.org/10.1016/j.compositesa.2016.07.013CrossRef

76.

Bickerton S, Sozer EM, Graham PJ, Advani SG (2000) Fabric structure and mold curvature effects on preform permeability and mold filling in the RTM process. Part I. experiments. Compos Part A Appl Sci Manuf 31(5):423–438. https://doi.org/10.1016/S1359-835X(99)00087-1CrossRef

77.

Pierce RS, Falzon BG, Thompson MC (2017) A multi-physics process model for simulating the manufacture of resin-infused composite aerostructures. Compos Sci Technol 149:269–279. https://doi.org/10.1016/j.compscitech.2017.07.003CrossRef

78.

Hallander P, Sjölander J, Åkermo M (2015) Composites : Part A Forming induced wrinkling of composite laminates with mixed ply material properties ; an experimental study. Compos Part A 78:234–245. https://doi.org/10.1016/j.compositesa.2015.08.025CrossRef

79.

Thije RHW, Loendersloot R, Akkerman R (2005) Drape simulation of non-crimp fabrics. 8–11

80.

De Luca P, Lefébure P, Pickett AK (1998) Numerical and experimental investigation of some press forming parameters of two fibre reinforced thermoplastics: APC2-AS4 and PEI-CETEX. Compos Part A Appl Sci Manuf 29(1-2):101–110. https://doi.org/10.1016/S1359-835X(97)00060-2CrossRef

81.

ten Thije RHW, Akkerman R (2009) A multi-layer triangular membrane finite element for the forming simulation of laminated composites. Compos Part A Appl Sci Manuf 40(6-7):739–753. https://doi.org/10.1016/j.compositesa.2009.03.004CrossRef

82.

Boisse P, Huang J, Guzman-Maldonado E (2021) Analysis and modeling of wrinkling in composite forming. J Compos Sci 5(3):1–16. https://doi.org/10.3390/jcs5030081CrossRef

83.

Huang J, Boisse P, Hamila N, Zhu Y (2020) Simulation of wrinkling during bending of composite reinforcement laminates. Materials (Basel) 13(10). https://doi.org/10.3390/ma13102374

84.

Wang P, Hamila N, Pineau P, Boisse P (2014) Thermomechanical analysis of thermoplastic composite prepregs using bias-extension test. J Thermoplast Compos Mater 27(5):679–698. https://doi.org/10.1177/0892705712454289CrossRef

85.

Allaoui S, Hivet G, Cellard C (2015) Inter-ply friction effect on the forming result of multi-layered composite. Key Eng Mater 651–653:381–386. https://doi.org/10.4028/www.scientific.net/KEM.651-653.381CrossRef

86.

Thompson AJ, Belnoue JPH, Hallett SR (2020) Modelling defect formation in textiles during the double diaphragm forming process. Compos Part B Eng 202:108357. https://doi.org/10.1016/j.compositesb.2020.108357CrossRef

87.

Shanwan A, Allaoui S (2019) Different experimental ways to minimize the preforming defects of multi-layered interlock dry fabric. Int J Mater Form 12(1):69–78. https://doi.org/10.1007/s12289-018-1407-6CrossRef

88.

Liu LS, Zhang T, Wang P, Legrand X, Soulat D (2015) Influence of the tufting yarns on formability of tufted 3-dimensional composite reinforcement. Compos Part A Appl Sci Manuf 78:403–411. https://doi.org/10.1016/j.compositesa.2015.07.014CrossRef

89.

Shen H, Wang P, Legrand X, Liu L (2019) Characterisation and optimisation of wrinkling during the forming of tufted three-dimensional composite preforms. Compos Part A Appl Sci Manuf 127:105651. https://doi.org/10.1016/j.compositesa.2019.105651CrossRef

90.

Ó Brádaigh CM, McGuinness GB, McEntee SP (1997) Chapter 7 implicit finite element modelling of composites sheet forming processes. Compos Mater Ser 11:247–322. https://doi.org/10.1016/S0927-0108(97)80009-4

91.

Bickerton S, Šimáček P, Guglielmi SE, Advani SG (1997) Investigation of draping and its effects on the mold filling process during manufacturing of a compound curved composite part. Compos Part A Appl Sci Manuf 28(9-10):801–816. https://doi.org/10.1016/S1359-835X(97)00033-XCrossRef

92.

Koziey BL, Ghafur MO, Vlachopoulos J, Mirza FA (1997) Chapter 3 computer simulation of thermoforming. Compos Mater Ser 11:75–89. https://doi.org/10.1016/S0927-0108(97)80005-7CrossRef

93.

Nosrat Nezami F, Gereke T, Cherif C (2016) Analyses of interaction mechanisms during forming of multilayer carbon woven fabrics for composite applications. Compos Part A Appl Sci Manuf 84:406–416. https://doi.org/10.1016/j.compositesa.2016.02.023CrossRef

94.

Gorczyca-Cole JL, Sherwood JA, Chen J (2007) A friction model for thermostamping commingled glass-polypropylene woven fabrics. Compos Part A Appl Sci Manuf 38(2):393–406. https://doi.org/10.1016/j.compositesa.2006.03.006CrossRef

95.

(2012) Influence of the dry woven fabrics meso-structure on fabric / fabric contact behavior. https://doi.org/10.1177/0021998311424627

96.

Allaoui S, Hivet G, Billoët JL (2009) Experimental analysis of the contact between layers of dry fabrics. Int J Mater Form 2(S1):209–212. https://doi.org/10.1007/s12289-009-0555-0CrossRef

97.

Hivet G, Allaoui S, Cam BT, Ouagne P, Soulat D (2012) Design and potentiality of an apparatus for measuring yarn/yarn and fabric/fabric friction. Exp Mech 52(8):1123–1136. https://doi.org/10.1007/s11340-011-9566-0CrossRef

98.

Allaoui S (2007) Integrated tool for simulation of textile composites

99.

Kacimi B, Djebbar A, Allaoui S (2019) Effect of reinforcement shear and mesoscopic defects on the low velocity impact behavior of a GFRP

100.

Shanwan A, Cruanes C, Allaoui S, et al (2020) GFRP mechanical behaviour induced by a mesoscopic shaping defect to cite this version : HAL id : HAL-02481013

101.

Ouagne P, Soulat D, Moothoo J, Capelle E, Gueret S (2013) Complex shape forming of a flax woven fabric; analysis of the tow buckling and misalignment defect. Compos Part A Appl Sci Manuf 51:1–10. https://doi.org/10.1016/j.compositesa.2013.03.017CrossRef

102.

Iwata A, Inoue T, Naouar N, Boisse P, Lomov SV (2019) Coupled meso-macro simulation of woven fabric local deformation during draping. Compos Part A Appl Sci Manuf 118:267–280. https://doi.org/10.1016/j.compositesa.2019.01.004CrossRef

103.

Salem MM, De Luycker E, Fazzini M, Ouagne P (2019) Experimental, analytical and numerical investigation to prevent the tow buckling defect during fabric forming. Compos Part A Appl Sci Manuf 125:105567. https://doi.org/10.1016/j.compositesa.2019.105567CrossRef

104.

Hull BD, Rogers TG, Spencer AJM (1991) Theory of fibre buckling and wrinkling in shear flows of fibre-reinforced composites. Compos Manuf 2(3-4):185–191. https://doi.org/10.1016/0956-7143(91)90138-7CrossRef

105.

Cai Z, Gutowski T (1992) The 3-D deformation behavior of a lubricated Fiber bundle. J Compos Mater 26(8):1207–1237. https://doi.org/10.1177/002199839202600808CrossRef

106.

Lightfoot JS, Wisnom MR, Potter K (2013) Defects in woven preforms: formation mechanisms and the effects of laminate design and layup protocol. Compos Part A Appl Sci Manuf 51:99–107. https://doi.org/10.1016/j.compositesa.2013.04.004CrossRef

107.

Labanieh AR, Garnier C, Ouagne P, Dalverny O, Soulat D (2018) Intra-ply yarn sliding defect in hemisphere preforming of a woven preform. Compos Part A Appl Sci Manuf 107:432–446. https://doi.org/10.1016/j.compositesa.2018.01.018CrossRef

108.

Sjölander J, Hallander P, Åkermo M (2016) Forming induced wrinkling of composite laminates: a numerical study on wrinkling mechanisms. Compos Part A Appl Sci Manuf 81:41–51. https://doi.org/10.1016/j.compositesa.2015.10.012CrossRef

109.

Lightfoot JS, Wisnom MR, Potter K (2013) A new mechanism for the formation of ply wrinkles due to shear between plies. Compos Part A Appl Sci Manuf 49:139–147. https://doi.org/10.1016/j.compositesa.2013.03.002CrossRef

Title: Composite preforming defects: a review and a classification
Authors: Rym Azzouz
Samir Allaoui
Raphael Moulart
Publication date: 04-09-2021
Publisher: Springer Paris
Published in: International Journal of Material Forming / Issue 6/2021
Print ISSN: 1960-6206
Electronic ISSN: 1960-6214
DOI: https://doi.org/10.1007/s12289-021-01643-7

Springer Professional

Abstract

Please log in to get access to your license.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Other articles of this Issue 6/2021

The origin of end flare in roll formed profiles

Closed-loop control of product geometry by using an artificial neural network in incremental sheet forming with active medium

Pure and simple: investigating the in-plane shear kinematics of a quasi-unidirectional glass fiber non-crimp fabric using the bias-extension test

Investigating delamination, uncut fibers, tolerances and surface topography in high speed Drilling of Polypropylene Composite Reinforced with carbon fibers and calcium carbonate Nano-particles

Consequences of large strain anisotropic work-hardening in cold forging

Stamped part classification and automatic dieface design

Premium Partners