Top

Published in:

2019 | OriginalPaper | Chapter

28. Correlation Between Mechanical Properties and Microstructure of Fe-Ti-Zn Alloys Fabricated by Powder Metallurgy

Authors : D. Arthur Jebastine Sunderraj, D. Ananthapadmanaban, K. Arun Vasantha Geethan, S. Vijayananth

Published in: Advances in Micro and Nano Manufacturing and Surface Engineering

Publisher: Springer Singapore

Activate our intelligent search to find suitable subject content or patents.

search-config

AI-assisted search

Off

Abstract

Two Iron-based alloys namely, 93Fe-5Ti-2Zn and for 88Fe-10Ti-2Zn, Specimens were prepared using powder metallurgy techniques. XRD results on both alloys showed the presence of intermetallic phase in 88Fe-10Ti-2Zn. The hardness of 88Fe-10Ti-2Zn samples was higher than that of 93Fe-5Ti-2Zn sample. Impact value for Sample 1 (93Fe-5Ti-2Zn) was 66 J and for Sample 2 (88Fe-10Ti-2Zn) was 73 J. Mechanical property values were correlated to the XRD and microstructures obtained.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

inform now

previous chapter Investigation and Evaluation of Erosion Efficiency in Micro-EDM Dressing of Biocompatible Ti6Al7Nb Material

next chapter Experimental Investigations into Wire Electrical Discharge Machining Process for the Machining of Ti-6Al-4V

Moravej, M., Mantovani, D.: Biodegradable metals for cardiovascular stent application: interests and new opportunities. Int. J. Mol. Sci. 12, 4250–4270 (2011). https://doi.org/10.3390/ijms12074250CrossRef

Teisanu, C., Gheorghe, S.: Development of new PM iron-based materials for self-lubricating bearings. Adv. Tribol. 2011, 11 pp. (Article ID 248037) (2011). http://dx.doi.org/10.1155/2011/248037

Xiao, Z.Y., Ke, M.Y., Fang, L., Shao, M., Li, Y.Y.: Die wall lubricated warm compacting and sintering behaviors of pre-mixed Fe–Ni–Cu–Mo–C powders. J. Mater. Process. Technol. 209, 4527–4530 (2009). https://doi.org/10.1016/j.jmatprotec.2008.10.018CrossRef

Gakkaishi, K.: ASM alloy phase diagrams center, 2007; data from Murakami Y., An investigation on the titanium-iron-carbon system (1st Report). On the Titanium Iron System, Nippon, vol. 21, 1957, pp. 665–669 (2007)

Lou, J., Gabbitas, B., Zhang, D.L.: Effects of lubrication on the powder metallurgy processing of titanium. In: Key Engineering Materials, vol. 520, pp. 133–138 (2012). https://doi.org/10.4028/www.scientific.net/KEM.520.133CrossRef

Fogagnolo, J.B., Robert, M.H., Torralba, J.M.: The effects of mechanical alloying on the extrusion process of Aa 6061 alloy reinforced with Si3n4, the Brazilian Congress of Mechanical Engineering, November 1999. Print version ISSN 1678-5878 On-line version ISSN 1806-3691. http://dx.doi.org/10.1590/S1678-58782003000200015

Çavdar, U., Atik, E., Ataç, A.: Mechanical properties and hardness results of the medium frequency induction sintered iron based powder metal bushings. Sci. Sinter. 46, 195–203 (2014). https://doi.org/10.2298/sos1402195cCrossRef

Górny, M., Kawalec, M., Effects of titanium addition on microstructure and mechanical properties of thin-walled compacted graphite iron castings. J. Mater. Eng. Perform. 22(5), 1519–1524 (2013). https://doi.org/10.1007/s11665-012-0432-8CrossRef

Gelfi, M., Gorini, D., Pola, A., La Vecchia, G.M.: Effect of titanium on the mechanical properties and microstructure of gray cast iron for automotive applications. J. Mater. Eng. Perform. 25(9), 3896–3903 (2016). https://doi.org/10.1007/s11665-016-2227-9CrossRef

10.

Yu, W-T., Li, J., Shi, C-B., Zhu, Q-T.: Effect of titanium on the martensitic stainless steel 8Cr13MoV. Metals 6(8), 193 (2016). https://doi.org/10.3390/met6080193CrossRef

11.

Gelfi, M., Gorini, D., Pola, A., La Vecchia, G.M.: Effect of titanium on the mechanical properties and microstructure of gray cast Iron for automotive applications. J. Mater. Eng. Perform. 25(9), 3896–3903 (2016)CrossRef

12.

Yu, W-T., Li, J., Shi, C-B., Zhu, Q-T.: Effect of titanium on the martensitic stainless steel 8Cr13MoV. ZhuMetals 6, 1–15 (2016)CrossRef

Title: Correlation Between Mechanical Properties and Microstructure of Fe-Ti-Zn Alloys Fabricated by Powder Metallurgy
Authors: D. Arthur Jebastine Sunderraj
D. Ananthapadmanaban
K. Arun Vasantha Geethan
S. Vijayananth
Publisher: Springer Singapore
Book: Advances in Micro and Nano Manufacturing and Surface Engineering
Print ISBN: 978-981-329-424-0

Electronic ISBN: 978-981-329-425-7

Copyright Year: 2019
DOI: https://doi.org/10.1007/978-981-32-9425-7_28

Springer Professional

Abstract

Please log in to get access to your license.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Premium Partners