Top

Published in:

2018 | OriginalPaper | Chapter

Cost Optimization of a Ring Frame Unit

Authors : Rathinadurai Louis Helen Catherine, A. Soundarrajan, Josephine Rathinadurai Louis

Published in: Advances in Power Systems and Energy Management

Publisher: Springer Singapore

Activate our intelligent search to find suitable subject content or patents.

search-config

AI-assisted search

Off

Abstract

India focuses on many sectors out of which much of its growth in energy consumption is expected to occur in the countries outside the Organisation for Co-operation Economic and Development (OCED) known as non-OCED where demand will be drawn by strong, long-term economic growth and India fits into this particular category. In this research, the spinning mill is considered for optimizing the parameters regarding the energy management with the real-time data taken from a ring frame unit of spinning mill, analysis is done to find the feasible operating conditions with the aim of minimizing the energy cost and increasing the profitability of the sector, thereby suggesting for the spinning mill sector in India.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

inform now

previous chapter Impact of DC Bias on the Magnetic Loading of Three Phase Three Limb Transformer Based on Finite Element Method

next chapter Analysis of Power System Harmonics Using PSNR Metric

Available only for authorised users

Nimon, W., Beghin, J.: Ecolabels and international trade in the textile and apparel market. Wesley Am. J. Agric. Econ. 81(5), 1078–1083 (1999). http://lib.dr.iastate.edu/card_workingpapers/228/

Kneller, R., Stevens, P.A.: Frontier technology and absorptive capacity evidence from OECD manufacturing industries. Oxford Bull. Econ. Stat. 68(1), 1–21 (2006). http://onlinelibrary.wiley.com/doi/10.1111/j.1468-0084.2006.00150.x/abstract

Jimenez-Rodriguez, R.: The impact of oil price shocks: evidence from the industries of six OECD countries. Energy Econ. 30(6), 3095–3108 (2008). www.sciencedirect.com/science/journal/01409883/30

Kumar, D., Singh, D.: Export competitiveness of indian textile industry. Abhinav Nat. Monthly Refereed J. Res. Commer. Manage. 4(2), 1–7 (2015). http://abhinavjournal.com/journal/index.php/ISSN-22771166/article/view/535

Tandon, N., Reddy, E.E.: A study on emerging trends in textile industry in India. Int. J. Adv. Res. Technol. 2(7), 267–277 (2013)

Singh, M.P., Lal, M.: Export performance and competitiveness of Indian textile industry. Int. J. Sci. Res. 2(11), 315–316 (2013). http://citeseerx.ist.psu.edu/viewdoc/download?doi=10.1.1.685.3177&rep=rep1&type=pdf

Sharma, M., Dhiman, R.: Determinants affecting indian textile exports. A Rev. Biz Bytes. 6(2), 195–201 (2015). http://cbsmohali.org/img/Determinants%20Affecting%20Indian%20Textile%20Exports%20A%20Review

Silber, S., Sloupensky, J., Dirnberger, P., Moravec, M., Amrhein, W., Reisinger, M.: High-speed drive for textile rotor spinning applications. IEEE Trans. Ind. Electron. 61(6), 2990–2997 (2014). http://ieeexplore.ieee.org/stamp/stamp.jsp?arnumber=6504511

Muthukumar, E., Nisha, K.G.: A study on the effect of material price fluctuations on the profitability of yarn industry in India with special reference to Precot Meridian Ltd. Res. J. Financ. Acc. 5(19), 134–144 (2014). www.iiste.org/Journals/index.php/RJFA/article/download/16853/17192

10.

Gupta, N.: Analysis on the defects in yarn manufacturing process & its prevention in textile industry. Int. J. Eng. Inventions. 2(7), 45–67 (2013). http://www.ijeijournal.com/papers/v2i7/H02074567.pdf

11.

Altas, S., Kadoğlu, H.: Comparison of conventional ring, mechanical compact and pneumatic compact yarn spinning systems. J. Eng. Fibers Fabr. 7(1), 162–170 (2012). http://www.jeffjournal.org/papers/Volume7/7.1.10.Altas.pdf

12.

Koç, E., Kaplan, E.: An investigation on energy consumption in yarn production with special reference to ring spinning. Fibres Text. East. Eur. 15(4), 18–24 (2007). www.fibtex.lodz.pl/2007/4/18

13.

Hasanbeigi, A., Hasanabadi, A., Abdorrazaghi, M.: Energy-efficiency technologies and comparing the energy intensity in the textile industry. In: Industry Reprint version of proceedings of the American Council for an Energy-Efficient Economy’s, pp. 26–29 (2011)

14.

Hasanbeigi, A., Price, L.: A review of energy use and energy efficiency technologies for the textile industry. Renew. Sustain. Energy Rev. 16, 3648–3665 (2012). https://publications.lbl.gov/islandora/object/ir:158360/datastream/PDF

15.

Shyjith, K., Ilangkumaran, M., Kumanan, S.: Multi‐criteria decision‐making approach to evaluate optimum maintenance strategy in textile industry. J. Qual. Maintenance Eng. 14(4), 375–386 (2008). www.emeraldinsight.com/doi/abs/10.1108/13552510810909975

16.

Joseph, J., Vetrivel, M.A.: Impact of target costing and activity based costing on improving the profitability of spinning mills in Coimbatore. J. Contemp. Res. Manag. 7(2), 41–56 (2012). http://www.psgim.ac.in/journals/index.php/jcrm/article/download/226/215

17.

Shakil, M., Ullah, M.R., Lutfi, M.: Process flow chart and factor analysis in production of a jute mills. J. Ind. Intell. Inf. 1(4), 247–254 (2013). www.jiii.org/uploadfile/2013/1118/20131118105220639

18.

Khan, M.K.R., Hossain, M.M.: An experimental investigation of the effects of some process conditions on ring yarn breakage. IOSR J. Polym. Text. Eng. 2(2), 29–33 (2015). www.iosrjournals.org/iosr-jpte/papers/Vol2-issue2/D0222933

Title: Cost Optimization of a Ring Frame Unit
Authors: Rathinadurai Louis Helen Catherine
A. Soundarrajan
Josephine Rathinadurai Louis
Publisher: Springer Singapore
Book: Advances in Power Systems and Energy Management
Print ISBN: 978-981-10-4393-2

Electronic ISBN: 978-981-10-4394-9

Copyright Year: 2018
DOI: https://doi.org/10.1007/978-981-10-4394-9_11