Skip to main content
Disciplines
Automotive Business IT + Informatics Construction + Real Estate Electrical Engineering + Electronics Energy + Sustainability Insurance + Risk Finance + Banking Management + Leadership Marketing + Sales Mechanical Engineering + Materials
Events
DE
EN
Books
Journals
Topic Page
Marketing
Start single access now
Access for companies
EXTENDED SEARCH
Log in
Top
Metallurgical and Materials Transactions A
Published in: Metallurgical and Materials Transactions A 11/2007

01-11-2007 | SYMPOSIUM: Dynamic Behavior of Materials

Dynamic Recrystallization: The Dynamic Deformation Regime

Authors: L.E. Murr, C. Pizaña

Published in: Metallurgical and Materials Transactions A | Issue 11/2007

Log in

Activate our intelligent search to find suitable subject content or patents.

search-config
loading …

Abstract

Severe plastic deformation (PD), especially involving high strain rates (>103 s–1), occurs through solid-state flow, which is accommodated by dynamic recrystallization (DRX), either in a continuous or discontinuous mode. This flow can be localized in shear instability zones (or adiabatic shear bands (ASBs)) with dimensions smaller than 5 μ, or can include large volumes with flow zone dimensions exceeding centimeters. This article illustrates these microstructural features using optical and electron metallography to examine a host of dynamic deformation examples: shaped charge jet formation, high-velocity and hypervelocity impact crater formation, rod penetration into thick targets (which includes rod and target DRX flow and mixing), large projectile-induced target plug formation and failure, explosive welding, and friction-stir welding and processing. The DRX is shown to be a universal mechanism that accommodates solid-state flow in extreme (or severe) PD regimes.
previous article Dislocation Mechanics of Shock-Induced Plasticity
next article Shear Localization: A Historical Overview

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

  • über 102.000 Bücher
  • über 537 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Finance + Banking
  • Management + Führung
  • Marketing + Vertrieb
  • Maschinenbau + Werkstoffe
  • Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

  • über 67.000 Bücher
  • über 390 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Maschinenbau + Werkstoffe




 

Jetzt Wissensvorsprung sichern!

inform now
Footnotes
1
INCONEL is a trademark of INCO Alloys International Inc., Huntington, WV.
 
Literature
1.
H.A. Grebe, H.R. Pak, M.A. Meyers: Metall. Trans. A, 1985, vol. 16A, pp. 711-21.
2.
3.
A.H. Chokshi, M.A. Meyers: Scripta Metall. Mater., 1990, vol. 24, pp. 605–08. CrossRef
4.
U. Andrade, M.A. Meyers, K.S. Vecchio, A.H. Chokshi: Acta Metall. Mater., 1994, vol. 42 (9), pp. 3183–95. CrossRef
5.
M.A. Meyers, Y.J. Chen, F.D.S. Marquis, D.S. Kim: Metall. Mater. Trans. A, 1995, vol. 26, pp. 2493–2502. CrossRef
6.
L.E. Murr, H.K. Shih, C.-S. Niou, L. Zernow: Scripta Metall. Mater., 1993, vol. 29, pp. 567–71. CrossRef
7.
L.E. Murr, H.K. Shih, C.-S. Niou, L. Zernow: Scripta Metall. Mater., 1993, vol. 29, pp. 1291–97. CrossRef
8.
L.E. Murr, C.-S. Niou, E.P. Garcia, E. Ferreyra, T., J.M. Rivas, and J.C. Sanchez: Mater. Sci. Eng. A, 1997, vol. 222, pp. 118–32
9.
10.
E.A. Trillo, E.V. Esquivel, L.E. Murr, L.S. Magness: Mater. Character., 2002, vol. 48, pp. 407–21. CrossRef
11.
C. Pizaña, L.E. Murr, M.T. Baquera, I.A. Anchondo, A. Putrevu, C.Y. Piña, T.C. Tamoria, H.C. Chen, S.J. Cytron: Mater. Sci. Eng. A, 2006, vol. 428, pp. 301–13. CrossRef
12.
G. Liu, L.E. Murr, C-S. Niou, J.C. McClure, F.R. Vega: Scripta Mater., 1997, vol. 37 (3), pp. 355–61. CrossRef
13.
G. Liu, L.E. Murr, J.C. McClure: J. Mater. Sci. Lett., 1997, vol. 16, pp. 1801–03. CrossRef
14.
L.E. Murr, R.D. Flores, O.V. Flores, J.C. McClure, G. Liu, D. Brown: Mater. Res. Innov., 1998, vol. 1, pp. 211–23. CrossRef
15.
Y. Li, L.E. Murr, J.C. McClure: Mater. Sci. Eng. A, vol. 271, pp. 213–23.
16.
L.E. Murr, E.A. Trillo, S. Pappu, C. Kennedy: J. Mater. Sci., 2002, vol. 37, pp. 3337–60. CrossRef
17.
A. Karimi, M. Maamouri, J.L. Martin: Mater. Sci. Eng. A, 1989, vol. 113, pp. 287–96CrossRef
18.
High Performance Structures and Materials II, C.A. Brebbia and W.P. DeWilde, eds., WIT Press, London, 2004
19.
Ultrafine Grained Materials, R.S. Mishra, S.L. Semiatin, C. Suryanarayana, N.N. Thadhani, and T.C. Lowe, eds., TMS, Warrendale, PA, 2000
20.
M.A. Meyers, A. Mishra, D.J. Benson: Progr. Mater. Sci., 2006, vol. 51, pp. 427–556. CrossRef
21.
S.A. Quiñones, L.E. Murr: Phys. Status Solidi A, 1998, vol. 166, pp. 763–89CrossRef
22.
E.A. Trillo, L.E. Murr, A.H. Bujanda, N.E. Martinez: Acta Metall., 2002, vol. 50 (1), pp. 121–31
23.
L.E. Murr, A.A. Bujanda, E.A. Trillo, N.E. Martinez: J. Mater. Sci. Lett., 2002, vol. 21, pp. 559–63CrossRef
24.
B. Gonzales, L.E. Murr, O.L. Valerio, E.V. Esquivel, H. Lopez: Mater. Character., 2003, vol. 49 (4), pp. 359–66. CrossRef
25.
E.V. Esquivel, L.E. Murr, E.A. Trillo, M. Baquera: J. Mater. Sci., 2003, vol. 38, pp. 2223–31. CrossRef
26.
O.L. Valerio-Flores, L.E. Murr, V.S. Hernandez, S.A. Quinones: J. Mater. Sci., 2004, vol. 39, pp. 6271–80. CrossRef
27.
E. Ferreyra, T., L.E. Murr, E.P. Garcia, and F. Hörz: J. Mater. Sci., 1997, vol. 32, pp. 2573–85
28.
L.E. Murr, C.-S. Niou, E. Ferreyra, T., E.P. Garcia G. Liu F. Hörz, and R.P. Bernhard: J. Mater. Sci., vol. 32, pp. 3143–56
29.
F. Martinez, L.E. Murr, A. Ramirez, M.I. Lopez, S.M. Gaytan, B.F. Schuster: Mater. Sci. Eng., 2007, vol. A454–455, pp. 581–89
30.
S. Pappu, L.E. Murr, S. Sen, D. Kapoor, L.S. Magness: Mater. Sci. Eng. A, 2001, vol. 298, pp. 144–57. CrossRef
31.
E.A. Trillo, E.V. Esquivel, L.E. Murr, L.S. Magness: Mater. Character., 2002, vol. 48, pp. 407–21. CrossRef
32.
R.S. Rinehart, J. Pearson: Explosive Working of Metals, Pergamon, New York, NY, 1963, pp.
33.
S.H. Carpenter: Shock Waves and High-Strain-Rate Phenomena in Metals, M.A. Meyers and L.E. Murr, eds., Plenum Press, New York, NY, 1981, pp. 941–59.
34.
35.
E.V. Esquivel, L.E. Murr: Mater. Sci. Technol., 2006, vol. 22 (4), pp. 438–52. CrossRef
36.
S. Pappu, C. Kennedy, L.E. Murr, L.S. Magness, D. Kapoor: Mater. Sci. Eng. A, 1999, vol. 262, pp. 115–28. CrossRef
37.
38.
N.V. Naumovich, A.I. Yadevich, N.M. Chigrinova: in Shock Waves for Industrial Applications, L.E. Murr, ed., Noyes Publications, Park Ridge, NJ, 1988, p. 170.
39.
D.G. Brasher, D.J. Butler, A.W. Hane: in Shock Waves for Industrial Applications, L.E. Murr, ed., Noyes Publications, Park Ridge, NJ, 1988, p. 216.
40.
C.G. Rhodes, M.W. Mahoney, W.H. Bingel, R.A. Spurling, C.C. Bampton: Scripta Mater., 1997, vol. 36, pp. 69–73. CrossRef
41.
G. Liu, L.E. Murr, C-S. Niou, J.C. McClure, F.R. Vega: Scripta Mater., 1997, vol. 37, pp. 355–59CrossRef
42.
W. Tang, X. Guo, J.C. McClure, L.E. Murr, A. Nunes: J. Mater. Process. Manuf. Sci., 1998, vol. 7, pp. 163–75CrossRef
43.
L.E. Murr, G. Liu, J.C. McClure: J. Mater. Sci., 1997, vol. 16, pp. 1801–13
44.
L.E. Murr, G. Sharma, F. Contreras, M. Guerra, S.H. Kazi, M. Siddique, F.D. Flores, D.J. Shindo, K.F. Soto, E.A. Trillo, C. Schmidt, J.C. McClure: Aluminum 2001–Proc. TMS 2001: Aluminum Automotive and Joining Sessions, S.K. Das, J.G. Kaufman, T.J. Lienert eds., TMS, Warrendale, PA, 2001, p. 197.
45.
R.A. Prado, L.E. Murr, K.F. Soto, J.C. McClure: Mater. Sci. Eng. A, 2003, vol. 349, pp. 156–64CrossRef
46.
P.S. Follansbee: in Metallurgical Applications of Shock-Wave and High-Strain-Rate Phenomena, L.E. Murr, K.P. Staudhammer M.A. Meyers eds., Marcel Dekker, New York, NY, 1986, p. 451.
47.
E.V. Esquivel, L.E. Murr: Mater. Sci. Eng. A, 2005, vol. 409, pp. 13–23. CrossRef
48.
J.C.M. Li: in Science and Technology of Interfaces, S. Ankem, C.S. Pande, I. Ovid’ko S. Ranganathan eds., TMS, Warrendale, PA, 2002, p. 255.
49.
J.C.M. Li: in Frontiers in Materials Science, L.E. Murr and C. Stein, eds., Marcel Dekker, Inc., New York, NY, 1976, p. 527
Metadata
Title
Dynamic Recrystallization: The Dynamic Deformation Regime
Authors
L.E. Murr
C. Pizaña
Publication date
01-11-2007
Publisher
Springer US
Published in
Metallurgical and Materials Transactions A / Issue 11/2007
Print ISSN: 1073-5623
Electronic ISSN: 1543-1940
DOI
https://doi.org/10.1007/s11661-007-9185-7

Other articles of this Issue 11/2007

Metallurgical and Materials Transactions A 11/2007 Go to the issue

OriginalPaper

Liquid Metal Corrosion of 316L Stainless Steel, 410 Stainless Steel, and 1015 Carbon Steel in a Molten Zinc Bath

OriginalPaper

Alumina-Forming Austenitic Stainless Steels Strengthened by Laves Phase and MC Carbide Precipitates

Symposia: Dynamic Behavior of Materials

Dislocation Mechanics of Shock-Induced Plasticity

Symposium: Dynamic Behavior of Materials

Dynamic Mechanical Behavior Characterization of Epoxy-Cast Al + Fe2O3 Thermite Mixture Composites

Symposium: Dynamic Behavior of Materials

Influence of Microstructure on the Spall Failure of Aluminum Materials

OriginalPaper

Mechanical Properties of Super Duplex Stainless Steel 2507 after Gas Phase Thermal Precharging with Hydrogen

Premium Partners

    Image Credits