Effect of aging on microstructural development in an Al–Mg–Si alloy processed by high-pressure torsion

Experiments were conducted to evaluate the microstructural evolution in a commercial Al-0.6 % Mg-0.4 % Si alloy processed using high-pressure torsion for up to 20 turns. Disks of the alloy were tested in two different conditions: in a solution-treated condition and after a short aging treatment at 523 K. The results show that HPT processing introduces significant grain refinement through HPT processing including a reduction in grain size from ~150 µm to ~720 nm in 1 turn of HPT. The final grain size in this alloy was ~250 nm after 20 turns. Some tensile tests were conducted to evaluate the mechanical properties of the alloy at the solution treatment temperature. The results from these tests show that aging at 523 K leads to a small increase in ductility for all tensile samples with a maximum recorded elongation of ~230 %.