Top

Published in:

2016 | OriginalPaper | Chapter

Effect of Boron Nitride Coating on Wear Behavior of Carbide Cutting Tools in Milling of Inconel 718

Authors : Halil Caliskan, Bilal Kursuncu, Sevki Yilmaz Guven, Abdullah Cahit Karaoglanli, Mustafa Sabri Gok, Akgun Alsaran

Published in: Machining, Joining and Modifications of Advanced Materials

Publisher: Springer Singapore

Activate our intelligent search to find suitable subject content or patents.

search-config

AI-assisted search

Off

Abstract

Boron nitride based tribological coatings promise hope in tribological applications thanks to their excellent lubrication and heat resistance properties. However, the applicability of these coatings on cutting tools in machining applications is not well known and it needs to be revealed. Therefore, in this study, a boron nitride (BN) coating was deposited on carbide milling tools. Inconel 718 was used as workpiece material in face milling tests to determine the wear behavior of the BN coated carbide tools. Surface roughness and tool wear was recorded in relation with cutting length. Wear mechanisms on the coated carbide tools were determined using scanning electron microscopy in combination with energy dispersive spectroscopy. Abrasive and adhesive wear was found as main failure mechanisms on the worn tools. Approximately two times longer tool life was obtained with the BN coated carbide tools.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

inform now

previous chapter Experimental and Numerical Analysis of the Effect of Ribs and Beds in Sheet Metal Parts with 90° Bend

next chapter Fused Deposition Modeling of PCL/HA/MMT Biocompatible Polymer Nano-composites

Tian, X., Zhao, J., Gong, Z., et al.: Effect of cutting speed on cutting forces and wear mechanisms in high-speed face milling of Inconel 718 with Sialon ceramic tools. Int. J. Adv. Manuf. Technol. 69, 1–10 (2013)CrossRef

Ucun, İ., Aslantas, K., Bedir, F.: An experimental investigation of the effect of coating material on tool wear in micro milling of Inconel 718 super alloy. Wear 300, 8–19 (2013)CrossRef

Heuler, P., Affeldt, E., Wanhill, R.J.H.: Effects of loading waveform and stress field on high temperature fatigue crack growth of Alloy 718. Materialwiss. Werkstofftech. 34, 790–796 (2003)CrossRef

Benghersallah, M., Boulanouar, L., Lecoz, G., et al.: Dry high speed milling of nickel-based superalloy. Mechanika 19, 223–228 (2013)CrossRef

Thomas, A., El-Wahabi, M., Cabrera, J.M., et al.: High temperature deformation of Inconel 718. J. Mater. Process. Technol. 177, 469–472 (2006)CrossRef

Zetek, M., Česáková, I., Švarc, V.: Increasing cutting tool life when machining Inconel 718. Procedia Eng. 69, 1115–1124 (2014)CrossRef

Liao, Y.S., Lin, H.M., Wang, J.H.: Behaviors of end milling Inconel 718 superalloy by cemented carbide tools. J. Mater. Process. Technol. 201, 460–465 (2008)CrossRef

Zhang, S., Li, J.F., Wang, Y.W.: Tool life and cutting forces in end milling Inconel 718 under dry and minimum quantity cooling lubrication cutting conditions. J. Clean. Prod. 32, 81–87 (2012)CrossRef

Li, W., Guo, Y.B., Barkey, M.E., et al.: Effect tool wear during end milling on the surface integrity and fatigue life of Inconel 718. Procedia CIRP 14, 546–551 (2014)CrossRef

10.

Li, H.Z., Zeng, H., Chen, X.Q.: An experimental study of tool wear and cutting force variation in the end milling of Inconel 718 with coated carbide inserts. J. Mater. Process. Technol. 180, 296–304 (2006)CrossRef

11.

Ezugwu, E.O., Wang, Z.M., Machado, A.R.: The machinability of nickel-based alloys: a review. J. Mater. Process. Technol. 86, 1–16 (1998)CrossRef

12.

Ulrich, S., Ye, J., Stüber, M., et al.: Cubic boron nitride based metastable coatings and nanocomposites. Thin Solid Films 518, 1443–1450 (2009)CrossRef

13.

Uhlmann, E., Fuentes, J.A.O., Keunecke, M.: Machining of high performance workpiece materials with CBN coated cutting tools. Thin Solid Films 518, 1451–1454 (2009)CrossRef

14.

Ucun, İ., Aslantas, K., Bedir, F.: The performance of DLC-coated and uncoated ultra-fine carbide tools in micromilling of Inconel 718. Precision Eng. 41, 135–144 (2015)CrossRef

15.

Gu, J., Barber, G., Tung, S., et al.: Tool life and wear mechanism of uncoated and coated milling inserts. Wear 225–229, Part 1:273–284 (1999)

16.

Devillez, A., Le Coz, G., Dominiak, S., et al.: Dry machining of Inconel 718, workpiece surface integrity. J. Mater. Process. Technol. 211, 1590–1598 (2011)CrossRef

Title: Effect of Boron Nitride Coating on Wear Behavior of Carbide Cutting Tools in Milling of Inconel 718
Authors: Halil Caliskan
Bilal Kursuncu
Sevki Yilmaz Guven
Abdullah Cahit Karaoglanli
Mustafa Sabri Gok
Akgun Alsaran
Publisher: Springer Singapore
Book: Machining, Joining and Modifications of Advanced Materials
Print ISBN: 978-981-10-1081-1

Electronic ISBN: 978-981-10-1082-8

Copyright Year: 2016
DOI: https://doi.org/10.1007/978-981-10-1082-8_2

Springer Professional

Abstract

Please log in to get access to your license.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Premium Partners