Top

Published in:

2023 | OriginalPaper | Chapter

Effect of Hot Cylinder Materials on Gamma-Type Stirling Engine Performance Using Solar Dish Concentrator

Authors : Purbo Suwandono, Gigih Priyandono, Kushendarsyah Saptaji, Akhmad Rizal Fanani

Published in: Proceedings of the 2nd Energy Security and Chemical Engineering Congress

Publisher: Springer Nature Singapore

Activate our intelligent search to find suitable subject content or patents.

search-config

AI-assisted search

Off

Abstract

The characteristics of Indonesia's tropical climate by getting good sunlight throughout the year can be used as alternative and renewable energy. Stirling engine in general is a type of combustion motor that applies the principle of external combustion because the working system is done on the outside of the engine. The origins of the Stirling engine were discovered by a British scientist named Dr. Robert Stirling. This research using Parabolic Dish type powered by solar energy as a heat source. The Stirling engine is heated using solar energy from the Parabolic Dish. Hot cylinder as a displacer cover is varied by using different materials, namely stainless steel, copper, and glass. The results showed that hot cylinder material using glass gets the highest RPM of 131 RPM and indicated engine power of 0.0712 Watts.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

inform now

previous chapter A Study on the Wear Resistance and Lubrication Properties of Mixed Engine Oils

next chapter The Analysis of Risk Factor Repetitive Motion in Manufacturing Activities Based on Ergonomics

Nasional TSJDE (2019) Indonesia energy out look 2019. J Chem Inf Model 53(9):1689–1699

Shufat SA, Kurt E, Cinar C, Aksoy F, Hançerlioğulları A, Solmaz H (2019) Exploration of a stirling engine and generator combination for air and helium media. Appl Therm Eng 150(April):738–749

Borowik B, Borowik B, Kurytnik IP (2015) The application of microcontrollers diagnostic system for evaluation of Stirling engine. Adv Intell Syst Comput 317:19–30

Getie MZ, Lanzetta F, Bégot S, Admassu BT, Hassen AA (2020) Reversed regenerative Stirling cycle machine for refrigeration application: a review. Int J Refrig 118:173–187CrossRef

Caetano BC, Lara IF, Borges MU, Sandoval OR, Valle RM (2019) A novel methodology on beta-type Stirling engine simulation using CFD. Energy Convers Manag 184(November):510–520

Cardozo E, Malmquist A (2019) Performance comparison between the use of wood and sugarcane bagasse pellets in a Stirling engine micro-CHP system. Appl Therm Eng 159(February):113945

Hasanpour Omam S (2021) Exhaust waste energy recovery using Otto-ATEG-Stirling engine combined cycle, vol. 183. Elsevier Ltd

Dehelean NM, Dehelean LM, Perju D (2010) New trends in mechanism science. New Trends Mech Sci 613–623

Backes JG, D’Amico A, Pauliks N, Guarino S, Traverso M, Lo Brano V (2021) Life cycle sustainability assessment of a dish-stirling concentrating solar power plant in the Mediterranean area. Sustain Energy Technol Assessments 47(July):101444

10.

Çinar C, Aksoy F, Erol D (2012) The effect of displacer material on the performance of a low temperature differential Stirling engine. Int J Energy Res 36(8):911–917CrossRef

11.

Nazemzadegan MR, Kasaeian A, Toghyani S, Ahmadi MH, Saidur R, Ming T (2020) Multi-objective optimization in a finite time thermodynamic method for dish-Stirling by branch and bound method and MOPSO algorithm. Front Energy 14(3):649–665CrossRef

12.

Khanjanpour MH, Rahnama M, Javadi AA, Akrami M, Tavakolpour-Saleh AR, Iranmanesh M (2021) An experimental study of a gamma-type MTD Stirling engine. Case Stud Therm Eng 24(October 2019):100871

13.

Shboul B et al (2021) Design and Techno-economic assessment of a new hybrid system of a solar dish Stirling engine instegrated with a horizontal axis wind turbine for microgrid power generation. Energy Convers Manag 245:114587CrossRef

14.

Hans-detlev K (2019) Energy and thermal management, air-conditioning, and waste heat utilization. Energy Therm Manag Air-Conditioning, Waste Heat Util 30–39

15.

Hirata K (1997) Schmidt theory for Stirling engines. Stirling Engine home page. Disponível em, pp 1–9

16.

Mahmood YH (2020) Fabrication of Stirling engine and study its characteristics. Tikrit J Pure Sci 23(September)

Title: Effect of Hot Cylinder Materials on Gamma-Type Stirling Engine Performance Using Solar Dish Concentrator
Authors: Purbo Suwandono
Gigih Priyandono
Kushendarsyah Saptaji
Akhmad Rizal Fanani
Publisher: Springer Nature Singapore
Book: Proceedings of the 2nd Energy Security and Chemical Engineering Congress
Print ISBN: 978-981-19-4424-6

Electronic ISBN: 978-981-19-4425-3

Copyright Year: 2023
DOI: https://doi.org/10.1007/978-981-19-4425-3_11