Top

Forschung im Ingenieurwesen

Published in:

01-09-2019 | Originalarbeiten/Originals

Effect of installation errors on beveloid gears’ precision ground by cone-shape worm wheel

Authors: Bing Cao, Guolong Li

Published in: Forschung im Ingenieurwesen | Issue 3/2019

Activate our intelligent search to find suitable subject content or patents.

search-config

AI-assisted search

Off

Abstract

Both the mathematical model of a cone-shape worm wheel and the mathematical model of cone-shape worm wheel grinding beveloid gears with installation errors of a gear workpiece and a cone-shape worm wheel are developed. The effect of the installation errors including gears’ incline error, eccentric error, mounting angle error of a cone-shape worm wheel and coupling error of installation errors mentioned on gears’ surface deviation is investigated. The sensitivity of tooth surface deviation to installation errors mentioned is analyzed. The results show that the helix slope deviation, helix total deviation and tooth cumulative pitch deviation are more sensitive to gears’ incline error. The tooth cumulative pitch deviation, profile total deviation, profile slope deviation are more sensitive to gears’ eccentric error. The effect of gears’ incline error and eccentric error on cumulative pitch deviation and individual cumulative pitch deviation is inverse which lead that coupling error including gears’ incline error and eccentric error causes smaller cumulative pitch deviation and individual cumulative pitch deviation compared to gears’ incline error or eccentric error. Moreover Effect of the mounting angle error of cone-shape worm wheel on gears’ surface deviation is very limited.

previous article Evaluation of Gear Flank Surface Structure Produced by Skiving

next article Einfluss der elastischen Nachgiebigkeit auf die Kraft beim tauchenden Kegelradschleifen

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

inform now

Tsai SJ, Wu SH (2007) Geometrical design of conical gear drives with profile-shifted transmission [ C ]. Proceedings of the Twelfth World Congress in Mechanism and Machine Science IFToMM, Besancon, France, 17–21 June 2007. [S. 1.]: DMG Lib, 2007: 1–6

Wu SH, Tsai SJ (2009) Contact stress analysis of skew conical involute gear drives in approximate line contact[J. Mech Mach Theory 44(9):1658–1676CrossRef

Zhu C, Liu L, Song C et al (2014) Pitch cone design and tooth contact analysis of intersected beveloid gears for marine transmission[J. Mech Mach Theory 82:141–153CrossRef

Zhu C, Liu L, Song C et al (2013) Pitch cone design and influence of misalignments on tooth contact behaviors of crossed beveloid gears[J. Mech Mach Theory 59:48–64CrossRef

Brauer J (2002) Analytical geometry of straight conical involute gears[J. Mech Mach Theory 37(1):127–141MathSciNetCrossRef

Liu C, Tsay C (2002) Contact characteristics of beveloid gears[J. Mech Mach Theory 37(4):333–350CrossRef

Liu S, Song C, Zhu C et al (2018) Effects of tooth modifications on mesh characteristics of crossed beveloid gear pair with small shaft angle[J. Mech Mach Theory 119:142–160CrossRef

Ni G, Zhu C, Song C et al (2017) Tooth contact analysis of crossed beveloid gear transmission with parabolic modification[J. Mech Mach Theory 113:40–52CrossRef

Mitome K (1985) Conical involute gear: part 3. tooth action of a pair of gears[J. Bull Jsme 28(245):2757–2764CrossRef

10.

Mitome Ken-Ichi (1993) Infeed Grinding of Straight Conical Involute Gear. JSME international journal. Ser. C, Dynamics, control, robotics, design and manufacturing 36(4):537–542CrossRef

11.

Mitome K (1986) Inclining Work-Arbor Taper Hobbing of Conical Gear Using Cylindrical Hob[J. J Mech Des 108(1):135–141

12.

Li G, Jiang P, Cao B et al (2018) Generating grinding method of beveloid gears with conical worm wheel. Jisuanji Jicheng Zhizao Xitong/Computer Integrated Manufacturing Systems, CIMS. 24:1138–1146. https://doi.org/10.13196/j.cims.2018.05.007 CrossRef

Title: Effect of installation errors on beveloid gears’ precision ground by cone-shape worm wheel
Authors: Bing Cao
Guolong Li
Publication date: 01-09-2019
Publisher: Springer Berlin Heidelberg
Published in: Forschung im Ingenieurwesen / Issue 3/2019
Print ISSN: 0015-7899
Electronic ISSN: 1434-0860
DOI: https://doi.org/10.1007/s10010-019-00330-z

Springer Professional

Abstract

Please log in to get access to your license.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Other articles of this Issue 3/2019

Minimizing gear friction with water-containing gear fluids

Visualization of phase differences between tooth helix deviations using graph theory

Automated requirements-driven design synthesis of gearboxes with graph-based design languages using state of the art tools

Analytical design method for beveloid gears with a small shaft angle and offset

Crack detection of plastic gears using a convolutional neural network pre-learned from images of meshing vibration data with transfer learning

Study on transmission error of double circular arc spiral bevel gears for nutation drive based on assembly errors and different loads

Premium Partners