Top

Journal of Nondestructive Evaluation

Published in:

01-03-2016

Effect of Spectral Reshaping on Frequency Modulated Thermal Wave Imaging for Non-destructive Testing and Evaluation of Steel Material

Authors: Vanita Arora, Ravibabu Mulaveesala, Paolo Bison

Published in: Journal of Nondestructive Evaluation | Issue 1/2016

Activate our intelligent search to find suitable subject content or patents.

search-config

AI-assisted search

Off

Abstract

Infrared thermographic techniques show their potential usage for non-destructive testing and evaluation of various materials due to their inherent capabilities such as whole field, non-contact, qualitative and quantitative to detect surface and sub-surface anomalies. This contribution introduces a novel data analysis scheme by spectral reshaping of linear frequency modulated temperature profile captured over a mild steel specimen. Time and frequency domain based processing methods are adopted on the generated temporal thermal data to reveal the hidden defects. Obtained results show the potential capabilities of spectral reshaping based on Gaussian windowed chirp with enhanced resolution and sensitivity for sub-surface defect detection.

previous article Multi-Objective Optimization of a Magnetic Circuit for Magnetic Flux Leakage-Type Non-destructive Testing

next article Automatic Microstructural Characterization and Classification Using Higher-Order Spectra on Ultrasound Signals

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

inform now

Maldague, X.P.V.: Theory and Practice of Infrared Technology for Non Destructive Testing. Wiley, New York (2001)

Djupkep, F.B.D., Maldague, X., Bendada, A., Bison, P.: Analysis of a new method of measurement and visualization of indoor conditions by infrared thermography. Rev. Sci. Instrum. 84(7), 084906 (2013)CrossRef

Grinzato, E., Vavilov, V., Bison, P.G., Marinetti, S.: Hidden corrosion detection in thick metallic components by transient IR thermography. Infrared Phys. Technol. 49(3 SPEC. ISS.), 234–238 (2007)CrossRef

Bison, P., Ceseri, M., Fasino, D., Inglese, G.: Domain derivative approach to active infrared thermography. Inverse Prob. Sci. Eng. 18(7), 873–889 (2010)MathSciNetCrossRefMATH

Ringermacher, H.I., Howard, D.R., Filkins, R.J.: Flash-quenching for high resolution thermal depth imaging. Proc. AIP 700(1), 477–481 (2004)CrossRef

Omar, M.A., Zhou, Y.: A quantitative review of three flash thermography processing routines. Infrared Phys. Technol. 51(4), 300–306 (2008)CrossRef

Balageas, D.L.: Defense and illustration of time-resolved pulsed thermography for NDE. Quant. InfraRed Thermogr. J. 9(1), 3–32 (2012)CrossRef

Shepard, S.M.: Advances in pulsed thermography. In: Proceedings of SPIE - The International Society for Optical Engineering 4360, 511–515 (2001)

Busse, G., Eyerer, P.: Thermal wave remote and non destructive inspection of polymers. Appl. Phys. Lett. 43(4), 355–357 (1983)CrossRef

10.

Busse, G., Wu, D., Karpen, W.: Thermal wave imaging with phase sensitive modulated thermography. J. Appl. Phys. 71(7), 3962–3965 (1992)CrossRef

11.

Busse, G.: Nondestructive evaluation of polymer materials. NDT&E Int. 27(5), 253–262 (1994)CrossRef

12.

Maldague, X.P.V.: Introduction to NDT by active infrared thermography. Mater. Eval. 60(8), 1060–1073 (2002)

13.

MaIdague, X., Largouët, Y., Couturier, J.P.: A study of defect depth using neural networks in pulsed phase thermography: modeling, noise, experiments. Rev. Gen. Therm. 37(7), 704–717 (1998)CrossRef

14.

Maldague, X., Galmiche, F., Ziadi, A.: Advances in pulse phase thermography. Infrared Phys. Technol. 43(3–5), 175–181 (2002)CrossRef

15.

Vavilov, V.P., Marinetti, S.: Pulsed phase thermography and Fourier-analysis thermal tomography. Russ. J. Nondestr. Test. 35(2), 134–145 (1999)

16.

Avdelidis, N.P., Ibarra-Castanedo, C., Maldague, X., Marioli-Riga, Z.P., Almond, D.P.: A thermographic comparison study for the assessment of composite patches. Infrared Phys. Technol. 45(4), 291–299 (2004)CrossRef

17.

Ibarra-Castanedo, C., González, D., Klein, M., Pilla, M., Vallerand, S., Maldague, X.: Infrared image processing and data analysis. Infrared Phys. Technol. 46(1–2 SPEC. ISS.), 75–83 (2004)CrossRef

18.

Maldague, X., Marinetti, S.: Pulsed phase thermography. J. Appl. Phys. 79, 2694–2698 (1996)CrossRef

19.

Ghali, V.S., Jonnalagadda, N., Mulaveesala, R.: Three-dimensional pulse compression for infrared nondestructive testing. IEEE Sens. J. 9(7), 832–833 (2009)CrossRef

20.

Mulaveesala, R., Vaddi, J.S., Singh, P.: Pulse compression approach to infrared nondestructive characterization. Rev. Sci. Instrum. 79(8), 094901 (2008)CrossRef

21.

Mulaveesala, R., Ghali, V.S.: Coded excitation for infrared non-destructive testing of carbon fiber reinforced plastics. Rev. Sci. Instrum. 82(5), 054902 (2011)CrossRef

22.

Mulaveesala, R., Tuli, S.: Theory of frequency modulated thermal wave imaging for nondestructive subsurface defect detection. Appl. Phys. Lett. 89(19), 191913 (2006)CrossRef

23.

Mulaveesala, R., Pal, P., Tuli, S.: Interface study of bonded wafers by digitized linear frequency modulated thermal wave imaging. Sens. Actuators A 128(1), 209–216 (2006)

24.

Arora, V., Siddiqui, J.A., Mulaveesala, R., Muniyappa, A.: Pulse compression approach to nonstationary infrared thermal wave imaging for nondestructive testing of carbon fiber reinforced polymers. IEEE Sens. J. 15(2), 663–664 (2015). art. no. 6936841

25.

Dua, G., Mulaveesala, R.: Applications of Barker coded infrared imaging method for characterisation of glass fibre reinforced plastic materials. Electron. Lett. 49(16), 1071–1073 (2013)CrossRef

26.

Liu, J., Gong, J., Liu, L., Qin, L., Wang, Y.: Investigation on stress distribution of multilayered composite structure (MCS) using infrared thermographic technique. Infrared Phys. Technol. 61, 134–143 (2013)CrossRef

27.

Arora, V., Mulaveesala, R., Siddiqui, J.A., Muniyappa, A.: Hilbert transform-based pulse compression approach to infrared thermal wave imaging for sub-surface defect detection in steel material. Insight 56(9), 550–552 (2014)CrossRef

28.

Junyan, L., Yang, L., Fei, W., Yang, W.: Study on probability of detection (POD) determination using lock-in thermography for nondestructive inspection (NDI) of CFRP composite materials. Infrared Phys. Technol. 71, 448–456 (2015)CrossRef

29.

Borazjani, E., Spinello, D., Necsulescu, D.S.: Determination of the modulation frequency for thermographic non-destructive testing. NDT&E Int. 70(1), 1–8 (2015)CrossRef

30.

Gong, J., Liu, J., Qin, L., Wang, Y.: Investigation of carbon fiber reinforced polymer (CFRP) sheet with subsurface defects inspection using thermal-wave radar imaging (TWRI) based on the multi-transform technique. NDT&E Int. 62, 130–136 (2014)CrossRef

31.

Liu, J., Gong, J., Qin, L., Wang, H., Wang, Y.: Study of inspection on metal sheet with subsurface defects using linear frequency modulated ultrasound excitation thermal-wave imaging (LFM-UTWI). Infrared Phys. Technol. 62, 136–142 (2014)CrossRef

32.

Carslaw, H.S., Jaeger, J.C.: Conduction of Heat in Solids, 2nd edn. Clarendon Press, Oxford (1986)MATH

33.

Siddiqui, J.A., Arora, V., Mulaveesala, R., Muniyappa, A.: Modelling of the frequency modulated thermal wave imaging process through the finite element method for non-destructive testing of a mild steel sample. Insight 57(5), 266–268 (2015)CrossRef

34.

Siddiqui, J.A., Arora, V., Mulaveesala, R., Muniyappa, A.: Infrared thermal wave imaging for nondestructive testing of fibre reinforced polymers. Exp. Mech. 55(7), 1239–1245 (2015)CrossRef

Title: Effect of Spectral Reshaping on Frequency Modulated Thermal Wave Imaging for Non-destructive Testing and Evaluation of Steel Material
Authors: Vanita Arora
Ravibabu Mulaveesala
Paolo Bison
Publication date: 01-03-2016
Publisher: Springer US
Published in: Journal of Nondestructive Evaluation / Issue 1/2016
Print ISSN: 0195-9298
Electronic ISSN: 1573-4862
DOI: https://doi.org/10.1007/s10921-015-0333-5

Springer Professional

Abstract

Please log in to get access to your license.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Other articles of this Issue 1/2016

Examination of Spot Welded Joints with Active Thermography

On-Line Monitoring of Environment-Assisted Cracking in Nuclear Piping Using Array Probe Direct Current Potential Drop

An Intelligent Fault Diagnosis of Induction Motors in an Arbitrary Noisy Environment

The Second Harmonic Generation in Reflection Mode: An Analytical, Numerical and Experimental Study

Remote Real Time Monitoring for Underground Contamination in Mongolia Using Electrical Impedance Tomography

Experimental Structural Analysis of Hybrid Composite-Concrete Beams by Digital Image Correlation (DIC) and Acoustic Emission (AE)

Premium Partners