Top

Journal of Materials Science

Published in:

01-09-2008

Effects of rolling and hot pressing on mechanical properties of boron carbide-based ceramics

Authors: Nina Orlovskaya, Sergey Yarmolenko, Jag Sankar, Jakob Kuebler, Mykola Lugovy

Published in: Journal of Materials Science | Issue 17/2008

Activate our intelligent search to find suitable subject content or patents.

search-config

AI-assisted search

Off

Abstract

A study of hot pressed B₄C-based laminates, after rolling and without rolling, has been performed to elucidate the existence of fracture resistance/crack length anisotropy induced by this processing technique. While the crack lengths/fracture resistance was affected significantly by the presence of the residual stresses in B₄C/B₄C–ZrB₂ laminates, no differences in Vickers crack lengths were observed in B₄C/B₄C laminates prepared by rolling and hot pressing, as compared to the crack lengths seen in pure B₄C ceramics prepared by hot pressing without rolling. X-ray diffraction analysis confirmed that no texture has been formed during the rolling and hot pressing of B₄C ceramics.

previous article Droplet cooling in atomization sprays

next article Fabrication and characterization of Li0.5Fe2.5O4 octahedrons via a TEA-assisted route

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

inform now

Johnson GR, Holmquist TJ (1999) J Appl Phys 85:8060. doi:https://doi.org/10.1063/1.370643 CrossRef

Orphal DL, Franzen RR, Charters AC, Menna TL, Piekutowski AJ (1997) Int J Impact Eng 19:15. doi:https://doi.org/10.1016/S0734-743X(96)00004-8 CrossRef

Chen M, Mccauley JW, Hemker KJ (2003) Science 299:1563. doi:https://doi.org/10.1126/science.1080819 CrossRef

Bourne NK (2002) In: Proceedings of the Royal Society of London series A—mathematical, physical and engineering sciences, 458(2024), p 1999

Vogler TJ, Reinhart WD, Chabildas LC (2004) J Appl Phys 95:4173. doi:https://doi.org/10.1063/1.1686902 CrossRef

Niihara K, Nakahira A, Hirai T (1984) J Am Ceram Soc 67:13

Champagne B, Angers R (1979) J Am Ceram Soc 62:149. doi:https://doi.org/10.1111/j.1151-2916.1979.tb19042.x CrossRef

Yamada S, Sakaguchi S, Hirao K, Yamauchi Y, Kanzaki S (2003) J Ceram Soc Jpn 111:53. doi:https://doi.org/10.2109/jcersj.111.53 CrossRef

Thevenot F (1990) J Eur Ceram Soc 6:205. doi:https://doi.org/10.1016/0955-2219(90)90048-K CrossRef

10.

Abzianidze TG, Eristavi AM, Shalamberidze SO (2000) J Solid State Chem 154:191. doi:https://doi.org/10.1006/jssc.2000.8834 CrossRef

11.

Lee H, Speyer R (2002) J Am Ceram Soc 85:1291CrossRef

12.

Orlovskaya N, Lugovy M, Ko F, Yarmolenko S, Sankar J, Kuebler J (2006) Compos B 37:524. doi:https://doi.org/10.1016/j.compositesb.2006.02.022 CrossRef

13.

Orlovskaya N, Lugovy M, Kuebler J, Mechanical performance of 3 layered B₄C/B₄C-SiC laminates (in preparation)

14.

Tariolle S, Reynaud C, Thevenot F, Chartier T, Besso JL (2004) J Solid State Chem 177:487. doi:https://doi.org/10.1016/j.jssc.2003.02.007 CrossRef

15.

Mcclellan KJ, Chu F, Roper JM, Shindo I (2001) J Math Sci 36:3403. doi:https://doi.org/10.1023/A:1017947625784 CrossRef

16.

Radchenko A, Subbotin V, Lugovy M, Orlovskaya N, Fracture toughness anisotropy of hot pressed silicon nitride (in preparation)

17.

Orlovskaya N, Lugovy M, Subbotin V, Radchenko O, Adams J, Cheda M et al (2005) J Math Sci 40:5483. doi:https://doi.org/10.1007/s10853-005-1923-x CrossRef

18.

Kakazey M, Vlasova M, Gonzalez-Rodriguez JG, Dominguez-Patino M, Leder R (2006) Mater Sci Eng A 418:111. doi:https://doi.org/10.1016/j.msea.2005.11.018 CrossRef

19.

Tabor D (1951) Hardness of metals. Clarendon Press, Oxford

20.

Antis GR, Chantikol P, Lawn BR, Marshall DB (1981) J Am Ceram Soc 64:533. doi:https://doi.org/10.1111/j.1151-2916.1981.tb10320.x CrossRef

21.

European Standard EN 843-1, Advanced technical ceramics—Mechanical properties of monolithic ceramics at room temperature—Part 1: determination of flexural strength, December 2006

22.

European Standard EN 843-2, Advanced technical ceramics—Mechanical properties of monolithic ceramics at room temperature—Part 2: determination Young’s modulus, shear strength and Poisson’s ratio, December 2006

23.

Anselmi-Tamburini U, Ohyanagi M, Munir ZA (2004) Chem Mater 16:4347. doi:https://doi.org/10.1021/cm049195q CrossRef

24.

Lemis-Petropoulos P, Kapaklis V, Peikrishvili AB, Politis C (2003) J Mod Phys B 17:2781. doi:https://doi.org/10.1142/S0217979203018582 CrossRef

Title: Effects of rolling and hot pressing on mechanical properties of boron carbide-based ceramics
Authors: Nina Orlovskaya
Sergey Yarmolenko
Jag Sankar
Jakob Kuebler
Mykola Lugovy
Publication date: 01-09-2008
Publisher: Springer US
Published in: Journal of Materials Science / Issue 17/2008
Print ISSN: 0022-2461
Electronic ISSN: 1573-4803
DOI: https://doi.org/10.1007/s10853-008-2862-0

Springer Professional

Abstract

Please log in to get access to your license.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Other articles of this Issue 17/2008

Fabrication and characterization of Li0.5Fe2.5O4 octahedrons via a TEA-assisted route

Atomic force microscopy investigations on nanoindentation impressions of some metals: effect of piling-up on hardness measurements

Anomalous electrical conductivity and percolation in carbon nanotube composites

Combustion synthesis/quasi-isostatic pressing of TiC0.7–NiTi cermets: microstructure and transformation characteristics

Preparation of gold/polyaniline/multiwall carbon nanotube nanocomposites and application in ammonia gas detection

Production of an austenitic steel matrix composite reinforced by in-situ nodular eutectic: the role of Si

Premium Partners