Skip to main content
Disciplines
Automotive Business IT + Informatics Construction + Real Estate Electrical Engineering + Electronics Energy + Sustainability Insurance + Risk Finance + Banking Management + Leadership Marketing + Sales Mechanical Engineering + Materials
Events
DE
EN
Books
Journals
Topic Page
Marketing
Start single access now
Access for companies
EXTENDED SEARCH
Log in
Top
Journal of Material Cycles and Waste Management
Published in: Journal of Material Cycles and Waste Management 2/2015

01-04-2015 | ORIGINAL ARTICLE

Electromagnetic interference shielding boards produced using Tetra Paks waste and iron fiber

Authors: Changyan Xu, Jie Liu, Xudong Zhu, Yanling Zhu, Xueping Xiong, Xing Cheng

Published in: Journal of Material Cycles and Waste Management | Issue 2/2015

Log in

Activate our intelligent search to find suitable subject content or patents.

search-config
loading …

Abstract

Tetra Pak packages (Tetra paks) are one of typical paper/plastic/aluminum composites and widely used in soft drinks and dairy product markets. However, after its service life, serious environmental problems generate due to its non-biodegradable nature. In this paper, a novel electromagnetic interference (EMI) shielding board was developed using recycled Tetra paks waste with addition of iron fibers. The influence of fiber loading level, fiber length and number of iron fiber layer within the matrix on EMI shielding effectiveness (SE) and volume resistivity (VR) was investigated. The results indicated that fiber loading level, fiber length and number of iron fiber layer affected EMI shielding properties significantly. SE increased with the increasing fiber loading, fiber length and number of fiber layer, and VR had an opposite tendency. For the board with 5 mm thickness, the percolation threshold of fiber loading was between 0.008 and 0.02 % (weight of iron fiber/weight of Tetra paks). The boards had excellent total EMI shielding performance in range of 9000 Hz–200 MHz and 600–1500 MHz. This value-added product could be used in packaging, construction and other application fields and exhibited both environmental and economic advantages. It also could be considered as a step toward paper/plastic/aluminum composite waste management and preventing municipal solid wastes environmental pollution.
previous article A novel solidification technique for fluorine-contaminated bassanite using waste materials in ground improvement applications
next article Spatial characteristics of municipal solid waste generation and its influential spatial factors on a city scale: a case study of Xiamen, China

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

  • über 102.000 Bücher
  • über 537 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Finance + Banking
  • Management + Führung
  • Marketing + Vertrieb
  • Maschinenbau + Werkstoffe
  • Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

  • über 67.000 Bücher
  • über 390 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Maschinenbau + Werkstoffe




 

Jetzt Wissensvorsprung sichern!

inform now
Literature
1.
Pan Y, Tian F (2011) Discussion on the present situation and recycling scheme for Tetra Pak package. Ecol Econ 5:154–156
2.
Cui ZW (2009) Study of recycling technology for paper based composite. Shanghai paper 40 3:62–67
3.
Wang L (2006) Discussion on printing and recovery process of Tetra Pak package. Packag Eng 6:79–81
4.
Jiang YQ (2008) Discussion on the recycling of aluminum paper plastic composite. Chin High-Tech Enterp 11:151
5.
6.
Ayrilmis N, Candan Z, Hiziroglu S (2008) Physical and mechanical properties of cardboard panels made from used beverage carton with veneer overlay. Mater Des 29:1897–1903CrossRef
7.
Li N, Xiong XL (2008) Study on the separation of aluminum-plastic-paper composite for packaging. Packag Eng 29(12):56–58MathSciNet
8.
Zhang JF, Yan DH (2008) Study on wet process for the separation of paper based aluminum-plastic packaging composite. Res Environ Sci 21(6):99–104
9.
Lu JF, Shen JF, Zhen R (2010) Research and development of the recycling of Tetra Pak package. Guangzhou Chem Ind 39(9):17–18
10.
Hwang G-S, Wang EI-C, Su Y-C (2006) Preparation of composite board using foil-laminated and plastic-laminated liquid packaging paperboard as raw materials. J Wood Sci 52(3):230–235. doi:10.​1007/​s10086-005-0757-0
11.
Okino EYA, Santana MAE, de Souza MR (2000) Utilization of wastepaper to manufacture low density boards. Bioresour Technol 73:77–79CrossRef
12.
Saini P, Choudhary V, Singh BP, Mathur RB, Dhawan SK (2009) Polyaniline–MWCNT nanocomposites for microwave absorption and EMI shielding. Mater Chem Phys 113:919–926CrossRef
13.
Saini P, Arora M (2012) Microwave absorption and EMI shielding behavior of nanocomposites based on intrinsically conducting polymers, graphene and carbon nanotubes. In: Gomes AD (ed) New polymers for special applications. Intech, Croatia. doi:10.​5772/​48779
14.
Zhang B, Du Y, Zhang P, Zhao H, Kang L, Han X, Xu P (2013) Microwave absorption enhancement of Fe3O4/polyaniline core/shell hybrid microspheres with controlled shell thickness. J Appl Polym Sci 130(3):1909–1916CrossRef
15.
Yang Y, Gupta MC, Dudley KL, Lawrence RW (2005) Novel carbon nanotube—polystyrene foam composites for electromagnetic interference shielding. Nano Lett 5:2131–2134CrossRef
16.
Zhou W, Hu X, Bai X, Zhou S, Sun C, Yan J, Chen P (2011) Synthesis and electromagnetic, microwave absorbing properties of core shell Fe3O4 poly(3, 4-ethylenedioxythiophene) microspheres. ACS Appl Mater Interfaces 3(10):3839–3845CrossRef
17.
Panwar V, Park JO, Park SH, Kumar S, Mehra RM (2010) Electrical, dielectric, and electromagnetic shielding properties of polypropylene–graphite composites. J Appl Polym Sci 115(3):1306–1314CrossRef
18.
Hu QL, Kim MS (2008) Electromagnetic interference shielding properties of CO2 activated carbon black filled polymer coating materials. Carbon Lett 9(4):298–302CrossRef
19.
Chung DDL (2001) Review of electromagnetic interference shielding effectiveness of carbon materials. Carbon 39:279–285CrossRef
20.
Ameli A, Jung PU, Park CB (2013) Electrical properties and electromagnetic interference shielding effectiveness of polypropylene/carbon fiber composite foams. Carbon 60:379–391CrossRef
21.
Wong KH, Pickering SJ, Rudd CD (2010) Recycled carbon fibre reinforced polymer composite for electromagnetic interference shielding. Comp Part A 41(6):693–702CrossRef
22.
Li N, Huang Y, Du F, He X, Lin X, Gao H, Ma Y, Li F, Chen Y, Eklund PC (2006) Electromagnetic interference (EMI) shielding of single-walled carbon nanotube epoxy composites. Nano Lett 6:1141–1145CrossRef
23.
Saini P, Choudhary V (2013) Enhanced electromagnetic interference shielding effectiveness of polyaniline functionalized carbon nanotubes filled polystyrene composites. J Nanopart Res 15:1415CrossRef
24.
Saini P, Choudhary V (2013) Enhanced electromagnetic interference shielding effectiveness of polyaniline functionalized carbon nanotubes filled polystyrene composites. J Nanopart Res 15:1415CrossRef
25.
Tripathi SN, Saini P, Gupta D, Choudhary V (2013) Electrical and mechanical properties of PMMA/reduced grapheme oxide nanocomposites prepared via in situ polymerization. J Mater Sci 48:6223–6232. doi:10.​1007/​s10853-013-7420-8 CrossRef
26.
27.
Saini P, Choudhary V (2013) Structural details, electrical properties, and electromagnetic interference shielding response of processable copolymers of aniline. J Mater Sci 48:797–804CrossRef
28.
Shui X, Chung DDL (1997) Nickel filament polymer–matrix composites with low surface impedance and high electro magnetic interference shielding effectiveness. J Electron Mater 26(8):928–934CrossRef
29.
Bagwell RM, McManaman JM, Wetherhold RC (2006) Short shaped copper fibers in an epoxy matrix: their role in a multifunctional composite. Comp Sci Technol 66(3–4):522–530CrossRef
30.
Geng LP (2009) The metal fiber materials for electromagnetic shielding. Equip Mach 4:68–73
31.
32.
Xu CY, Liu J, Zhu XD (2012) Production of electromagnetic shielding boards using paper/plastic/aluminum packaging waste and copper fibers. Appl Mech Mater 200:254–258CrossRef
33.
Jalali M, Dauterstedt S, Michaud A, Wuthrich R (2011) Electromagnetic shielding of polymer-matrix composites with metallic nanoparticles. Compos B. doi:10.​1016/​j.​compositesb
34.
Roh J-S, Chi Y-S, Kang TJ, Nam S-W (2008) Electromagnetic shielding effectiveness of multifunctional metal composite fabrics. Text Res J 78(9):825–835CrossRef
35.
Lu KY, Fu F, Cai ZY, Fu YJ et al (2011) Study of properties of electromagnetic shielding plywood laminated with conductive sheets. J Build Mater 14(2):207–211
36.
Xu M, Ma TR, Bao HQ (2011) Study of electromagnetic shielding properties of composite enforced by glass fiber. Eng Plast Appl 39(4):15–18MATH
37.
Xie N, Jiao QJ, Zang CG, Liu S (2006) Study on the properties of LDPE-nickel/crystal iron fiber electromagnetic shielding packaging material. Packag Eng 27(1):10–12
38.
Faisal M, Khasim S (2013) Electrical conductivity, dielectric behavior and EMI shielding effectiveness of polyaniline-yttrium oxide composites. Bull Korean Chem Soc 34(1):99–106CrossRef
39.
Guo Z, Tan L (2009) Fundamentals and applications of nanomaterials. Artech House, Norwood
40.
GB1410-2006/IEC20093 (1980) IDT: methods of test for volume resistivity and surface resistivity of solid electrical insulating materials, Chian
41.
Schulz RB, Plantz VC, Brush DR (1988) Shielding theory and practice. IEEE Trans Electromagn Compat 30(3):187–201CrossRef
42.
Saini P, Arora M, Gupta G, Gupta BK, Singh VN, Choudhary V (2013) High permittivity polyaniline–barium titanate nanocomposites with excellent electromagnetic interference shielding response. Nanoscale 5:4330–4346. doi:10.​1039/​C3NR00634D CrossRef
43.
Saini P, Arora M (2013) Formation mechanism, electronic properties and microwave shielding by nano-structured polyanilines prepared by template free route using surfactant dopants. J Mater Chem A 1:8926–8934. doi:10.​1039/​C3TA11086A CrossRef
44.
Saini P, Choudhary V, Vijayan N, Kotnala RK (2012) Conducting polymer coated textile based multilayered shields for suppression of microwave radiations in 8.2–12.4 GHz range. J Phys Chem C 116:13403–13412. doi:10.​1021/​jp302131w CrossRef
45.
SJ 20524-1995 (1995) Measuring methods for shielding materials, China
46.
Yang SY (2006) Electromagnetic shielding theory and practice. National Defense Industry Press, China
47.
Zhang LW, Li XH (2010) Design and computational method of engineer electromagnetic shielding in EMC. Ship Power Technol 30(1):35–40
48.
Lin HB, Lu WS (2008) The principle of electromagnetic shielding and the electromagnetic shielding glass. Glass 3:39–42
49.
Miyasaka K, Watanabe K, Jojima E, Aida H, Sumita M, Ishikawa K (1982) Electrical conductivity of carbon-polymer composites as a function of carbon content. J Mater Sci 17(6):1610–1616CrossRef
50.
Vilčáková J, Sahá P, Quadrat O (2000) Electrical conductivity of carbon fibres/polyester resin composites in the percolation threshold region. Eur Polymer J 38:2343–2347CrossRef
51.
Jiang Y, Wang G (2005) Application of electromagnetic shielding glass in electromagnetic shielding shelter. Shield Technol Mater 1:37–39
52.
Fu F, Lu B, Wang ZT, Hua YK (2001) Percolation threshold of electrically conductive function in wood-based composite panels. Sci Silvae Sin 37(1):117–120
Metadata
Title
Electromagnetic interference shielding boards produced using Tetra Paks waste and iron fiber
Authors
Changyan Xu
Jie Liu
Xudong Zhu
Yanling Zhu
Xueping Xiong
Xing Cheng
Publication date
01-04-2015
Publisher
Springer Japan
Published in
Journal of Material Cycles and Waste Management / Issue 2/2015
Print ISSN: 1438-4957
Electronic ISSN: 1611-8227
DOI
https://doi.org/10.1007/s10163-014-0255-9

Other articles of this Issue 2/2015

Journal of Material Cycles and Waste Management 2/2015 Go to the issue

ORIGINAL ARTICLE

Carbon fiber recovery using water and benzyl alcohol in subcritical and supercritical conditions for chemical recycling of thermoset composite materials

ORIGINAL ARTICLE

A study on the drying characteristics from mixture of food waste and sawdust by using microwave/inner-cycle thermal-air drying process

SPECIAL FEATURE: ORIGINAL ARTICLE

Future sewage sludge generation and sewer pipeline extension in economically developing ASEAN countries

SPECIAL FEATURE: ORIGINAL ARTICLE

Chemical characterization in correlation to toxicity evaluation for water reuse of solid waste leachates in the itMBR-RO system

SPECIAL FEATURE: ORIGINAL ARTICLE

Enabling the recycling of rare earth elements through product design and trend analyses of hard disk drives

ORIGINAL ARTICLE

A novel solidification technique for fluorine-contaminated bassanite using waste materials in ground improvement applications