Top

Metals and Materials International

Published in:

13-05-2019

Electron Back Scattered Diffraction Study of Dissimilar Welding Between the Super Duplex Stainless Steel and the Ni-Based Superalloy

Authors: Jalal Kangazian, Morteza Shamanian

Published in: Metals and Materials International | Issue 5/2019

Activate our intelligent search to find suitable subject content or patents.

search-config

AI-assisted search

Off

Abstract

This research investigated the microtexture and boundaries characteristics of the Incoloy 825 Ni-based superalloy/UNS S32750 super duplex stainless steel (SDSS) dissimilar welds using electron back scattered diffraction analysis. The results indicated that the weld metal was textured; thus, {293}<311> and {348}<583> texture components were observed. As a result of the grain growth and the changes in the morphologies of the phases in the heat affected zones (HAZs), the primary texture components of the alloys were replaced by the new components. In addition, the maximum texture intensities of the generated components in the HAZs were higher than those of the related base metals. The grain growth as well as the changes in the phase morphologies also resulted in a decrease in the proportion of coincident site lattice (CSL) boundaries in the HAZs, in comparison with the base metals. Absence of CSL boundaries in the weld metal was observed too.

previous article Microstructure and Mechanical Properties of Welded Additively Manufactured Stainless Steels SS316L

next article Effect of Asymmetric Rolling on the Microstructure, Mechanical Properties and Texture Evolution of Mg–8Li–3Al–1Y Alloy

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

inform now

J. Lee, J. Hwang, D. Bae, Welding residual stress analysis and fatigue strength assessment at elevated temperature for multi-pass dissimilar material weld between alloy 617 and P92 steel. Met. Mater. Int. 24, 877–885 (2018). https://doi.org/10.1007/s12540-018-0086-7 CrossRef

M. Shakil, M. Ahmad, N.H. Tariq, B.A. Hasan, J.I. Akhter, E. Ahmed, M. Mehmood, M.A. Choudhry, M. Iqbal, Microstructure and hardness studies of electron beam welded Inconel 625 and stainless steel 304L. Vaccum. 110, 121–126 (2014). https://doi.org/10.1016/j.vacuum.2014.08.016 CrossRef

C. Hsieh, X. Guo, C. Chang, W. Wu, Dendrite evolution of delta (δ) ferrite and precipitation behavior of sigma (σ) phase during multipass dissimilar stainless steels welding. Met. Mater. Int. 16, 349–356 (2010). https://doi.org/10.1007/s12540-010-0602-x CrossRef

H. Naffakh, M. Shamanian, F. Ashrafizadeh, Weldability in dissimilar welds between Type 310 austenitic stainless steel and Alloy. J. Mater. Sci. 657, 5300–5304 (2008). https://doi.org/10.1007/s10853-008-2761-4 CrossRef

K.D. Ramkumar, R. Sridhar, S. Periwal, S. Oza, V. Saxena, P. Hidad, N. Arivazhagan, E.B. Weld, Investigations on the structure—property relationships of electron beam welded Inconel 625 and UNS 32205. J. Mater. Des. 68, 158–166 (2015). https://doi.org/10.1016/j.matdes.2014.12.032 CrossRef

A.H.V. Pavan, K.S.N. Vikrant, R. Ravibharath, K. Singh, Development and evaluation of SUS 304H—IN 617 welds for advanced ultra supercritical boiler applications. Mater. Sci. Engin. A 642, 32–41 (2015). https://doi.org/10.1016/j.msea.2015.06.065 CrossRef

H.S. Hosseini, M. Shamanian, A. Kermanpur, Characterization of microstructures and mechanical properties of Inconel 617/310 stainless steel dissimilar welds. Mater. Charact. 62, 425–431 (2011). https://doi.org/10.1016/j.matchar.2011.02.003 CrossRef

N. Sayyar, M. Shamanian, B. Niroumand, Arc weldability of Incoloy 825 to AISI 321 stainless steel welds. J. Mater. Process. Tech. 262, 562–570 (2018). https://doi.org/10.1016/j.jmatprotec.2018.07.020 CrossRef

A. Moteshakker, I. Danaee, Microstructure and corrosion resistance of dissimilar weld-joints between duplex stainless steel 2205 and austenitic stainless. J. Mater. Sci. Technol. 32, 282–290 (2016). https://doi.org/10.1016/j.jmst.2015.11.021 CrossRef

10.

L. Dong, Q. Peng, E. Han, W. Ke, L. Wang, Microstructure and intergranular stress corrosion cracking susceptibility of a SA508-52 M-316L dissimilar metal weld joint in primary water. J. Mater. Sci. Technol. 34, 1281–1292 (2018). https://doi.org/10.1016/j.jmst.2017.11.051 CrossRef

11.

A. Eghlimi, M. Shamanian, M. Eskandarian, A. Zabolian, J.A. Szpunar, Characterization of microstructure and texture across dissimilar super duplex/austenitic stainless steel weldments. Mater. Charact. 106, 208–217 (2015). https://doi.org/10.1016/j.matchar.2015.05.036 CrossRef

12.

A. Eghlimi, M. Shamanian, M. Eskandarian, A. Zabolian, J.A. Szpunar, Characterization of microstructure and texture across dissimilar super duplex/austenitic stainless steel weldment joint by super duplex filler metal. Mater. Charact. 106, 27–35 (2015). https://doi.org/10.1016/j.matchar.2015.05.017 CrossRef

13.

M. Alvand, M. Naseri, E. Borhani, H. Abdollah-pour, Nano/ultra fine grained AA2024 alloy processed by accumulative roll bonding: a study of microstructure, deformation texture and mechanical properties. J. Alloys Compd. 712, 517–525 (2017). https://doi.org/10.1016/j.jallcom.2017.04.117 CrossRef

14.

S. Sahu, N.K. Sharma, The effect of grain boundary structure on sensitization behavior in a nickel-based superalloy. J. Mater. Sci. (2018). https://doi.org/10.1007/s10853-018-2919-7

15.

X. Chen, Y.C. Lin, F. Wu, EBSD study of grain growth behavior and annealing twin evolution after full recrystallization in a nickel-based superalloy. J. Alloys Compd. 724, 198–207 (2017). https://doi.org/10.1016/j.jallcom.2017.07.027 CrossRef

16.

J. Kangazian, M. Shamanian, A. Ashrafi, Dissimilar welding between SAF 2507 stainless steel and Incoloy 825 Ni-based alloy: the role of microstructure on corrosion behavior of the weld metals. J. Manuf. Process. 29, 376–388 (2017). https://doi.org/10.1016/j.jmapro.2017.08.012 CrossRef

17.

J. Kangazian, M. Shamanian, Mechanical and microstructural evaluation of SAF 2507 and incoloy 825 dissimilar welds. J. Manuf. Process. 26, 407–418 (2017). https://doi.org/10.1016/j.jmapro.2017.03.006 CrossRef

18.

H. Akhiani, M. Nezakat, A. Sonboli, J. Szpunar, The origin of annealing texture in a cold-rolled Incoloy 800H/HT after different strain paths. Mater. Sci. Eng. A 619, 334–344 (2014). https://doi.org/10.1016/j.msea.2014.09.093 CrossRef

19.

H. Akhiani, M. Nezakat, J.A. Szpunar, Evolution of deformation and annealing textures in Incoloy 800H/HT via different rolling paths and strains. Mater. Sci. Eng. A 614, 250–263 (2014). https://doi.org/10.1016/j.msea.2014.07.035 CrossRef

20.

Q. Bai, Q. Zhao, S. Xia, B. Wang, B. Zhou, C. Su, Evolution of grain boundary character distributions in alloy 825 tubes during high temperature annealing: is grain boundary engineering achieved through recrystallization or grain growth? Mater. Charact. 123, 178–188 (2017). https://doi.org/10.1016/j.matchar.2016.11.016 CrossRef

21.

M. Shamanian, H. Mostaan, M. Safari, Friction stir modification of GTA 7075–T6 Al alloy weld joints: EBSD study and microstructural evolutions. Arch. Civ. Mech. Eng. 17, 574–585 (2017). https://doi.org/10.1016/j.acme.2017.01.002 CrossRef

22.

T. Saeid, A. Abdollah-zadeh, T. Shibayanagi, K. Ikeuchi, H. Assadi, On the formation of grain structure during friction stir welding of duplex stainless steel, Mater. Sci. Eng. A. (2010). https://doi.org/10.1016/j.msea.2010.07.011

23.

A. Eghlimi, M. Shamanian, K. Raeissi, Effect of current type on microstructure and corrosion resistance of super duplex stainless steel claddings produced by the gas tungsten arc welding process. Surf. Caot. Technol. 244, 45–51 (2014). https://doi.org/10.1016/j.surfcoat.2014.01.047 CrossRef

24.

J.C. Lippold, D.J. Kotecki, Welding metallurgy and weldability of stainless steels (John Wiley Hoboken, New Jersey, 2005)

25.

F.J. Humphreys, M. Hatherly, Recrystallization and related annealing phenomena (Elsevier, Amsterdam, 2012)

26.

S. Geng, J. Sun, L. Guo, H. Wang, Evolution of microstructure and corrosion behavior in 2205 duplex stainless steel GTA-welding joint. J. Manuf. Process 19, 32–37 (2015). https://doi.org/10.1016/j.jmapro.2015.03.009 CrossRef

27.

J. Verma, R.V. Taiwade, Effect of welding processes and conditions on the microstructure, mechanical properties and corrosion resistance of duplex stainless steel weldments — A review. J. Manuf. Process. 25, 134–152 (2017). https://doi.org/10.1016/j.jmapro.2016.11.003 CrossRef

28.

Z. Zhang, H. Jing, L. Xu, Y. Han, L. Zhao, Investigation on microstructure evolution and properties of duplex stainless steel joint multi-pass welded by using different methods. J. Mater. Des. 109, 670–685 (2016). https://doi.org/10.1016/j.matdes.2016.07.110 CrossRef

29.

S. Emami, T. Saeid, and R. Azari Khosroshahi, Microstructural evolution of friction stir welded SAF 2205 duplex stainless steel, J. Alloy Compd. 739 (2018) 678-689. https://doi.org/10.1016/j.jallcom.2017.12.310

30.

J.C. Lippold, Welding metallurgy and weldability. John Wiley & Sons (2015)

31.

A. Eghlimi, M. Shamanian, M. Eskandarian, A. Zabolian, Evaluation of microstructure and texture across the welded interface of super duplex stainless steel and high strength low alloy steel. Surf. Coat. Technol. 264, 150–162 (2015). https://doi.org/10.1016/j.surfcoat.2014.12.060 CrossRef

32.

H. Ming, Z. Zhang, J. Wang, E. Han, P. Wang, Z. Sun, Microstructure of a safe-end dissimilar metal weld joint (SA508-52-316L) prepared by narrow-gap GTAW. Mater. Charact. 123, 233–243 (2017). https://doi.org/10.1016/j.matchar.2016.11.029 CrossRef

Title: Electron Back Scattered Diffraction Study of Dissimilar Welding Between the Super Duplex Stainless Steel and the Ni-Based Superalloy
Authors: Jalal Kangazian
Morteza Shamanian
Publication date: 13-05-2019
Publisher: The Korean Institute of Metals and Materials
Published in: Metals and Materials International / Issue 5/2019
Print ISSN: 1598-9623
Electronic ISSN: 2005-4149
DOI: https://doi.org/10.1007/s12540-019-00289-0

Springer Professional

Abstract

Please log in to get access to your license.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Other articles of this Issue 5/2019

Processing and Properties of Biodegradable Magnesium Microtubes for Using as Vascular Stents: A Brief Review

Fabrication of a Porous Ni-Based Metal with a Multi-pore Structure by a Screen Printing Process

Low-Temperature Sintering Characteristics of Ag-Based Complex Inks Using Transient Melting and Joining of Sn–58Bi Nanoparticles

Relationships Between Stretch-Flangeability and Microstructure-Mechanical Properties in Ultra-High-Strength Dual-Phase Steels

3D Printed Parts with Honeycomb Internal Pattern by Fused Deposition Modelling; Experimental Characterization and Production Optimization

Effect of Microstructure and Texture Evolution During Variable Gauge Rolling on Mechanical Properties of Tailor Rolled Blanks

Premium Partners