Skip to main content
Top

2020 | OriginalPaper | Chapter

Electron Beam Additive Technology Optimization Using Mathematical Modeling

Authors : Oleh Makhnenko, Nikita Ananchenko, Stepan Kandala, Andriy Babenko

Published in: Proceedings of the Third International Conference on Theoretical, Applied and Experimental Mechanics

Publisher: Springer International Publishing

Activate our intelligent search to find suitable subject content or patents.

search-config
loading …

Abstract

Additive manufacturing technology are developing fast these days. Economical profit of manufacturing parts with complex geometry which have either hollow section or complex three-dimensional curvature, using 3D printers are higher than using standard manufacturing methods. Which means that 3D printer could be an alternative to traditional ways of manufacturing. This technology used in aerospace and medicine right now, and have a future in other industries. Currently the technology of wire electron xBeam 3D Metal Printer of parts with complex geometry from titanium alloy has been developing in Ukraine. Using of mathematical modeling for optimization of the technology parameters is very promising.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

  • über 102.000 Bücher
  • über 537 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Finance + Banking
  • Management + Führung
  • Marketing + Vertrieb
  • Maschinenbau + Werkstoffe
  • Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

  • über 67.000 Bücher
  • über 390 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Maschinenbau + Werkstoffe




 

Jetzt Wissensvorsprung sichern!

Literature
1.
go back to reference Kovalchuk, D., Melnyk, V., Melnyk, I.: New capabilities of additive manufacturing with xBeam 3D Metal Printing technology. In: College of Works of Eight International Conference on Beam Technology in Welding and Material Handling, Kiev, Ukraine, p. 51 (2017) Kovalchuk, D., Melnyk, V., Melnyk, I.: New capabilities of additive manufacturing with xBeam 3D Metal Printing technology. In: College of Works of Eight International Conference on Beam Technology in Welding and Material Handling, Kiev, Ukraine, p. 51 (2017)
2.
go back to reference Polkin, I.: Progressive technologies and new processes. In: Progressive Technologies of Light and Special Alloys, Fizmatlit, Moscow, pp. 66–73 (2006) Polkin, I.: Progressive technologies and new processes. In: Progressive Technologies of Light and Special Alloys, Fizmatlit, Moscow, pp. 66–73 (2006)
3.
go back to reference Lutjering, G., Williams, J.C.: Microstructure and properties of materials V.2. In: Li, J.C.M.: Microstructure and Mechanical Properties of Titanium Alloys, pp. 26–29 (2000) Lutjering, G., Williams, J.C.: Microstructure and properties of materials V.2. In: Li, J.C.M.: Microstructure and Mechanical Properties of Titanium Alloys, pp. 26–29 (2000)
4.
go back to reference Liu, S.: Additive manufacturing of Ti6Al4V alloy: a review. Mater. Des. 164, 1–23 (2018)CrossRef Liu, S.: Additive manufacturing of Ti6Al4V alloy: a review. Mater. Des. 164, 1–23 (2018)CrossRef
5.
go back to reference Sieniawski, J., Ziaja, W., Kubiak, K.: Microstructure and mechanical properties of high strength two-phase titanium alloys. In: Sieniawski, J.: Titanium Alloys, pp. 69–79 (2013) Sieniawski, J., Ziaja, W., Kubiak, K.: Microstructure and mechanical properties of high strength two-phase titanium alloys. In: Sieniawski, J.: Titanium Alloys, pp. 69–79 (2013)
6.
go back to reference Grabin, V.: Structure and Properties of Welded Joints from Titanium Alloys, p. 59. Naukova Dumka, Kiev (1964) Grabin, V.: Structure and Properties of Welded Joints from Titanium Alloys, p. 59. Naukova Dumka, Kiev (1964)
Metadata
Title
Electron Beam Additive Technology Optimization Using Mathematical Modeling
Authors
Oleh Makhnenko
Nikita Ananchenko
Stepan Kandala
Andriy Babenko
Copyright Year
2020
DOI
https://doi.org/10.1007/978-3-030-47883-4_50

Premium Partners