Top

The International Journal of Advanced Manufacturing Technology

Published in:

13-09-2022 | ORIGINAL ARTICLE

Experimental and numerical investigation of the effects of sheet material, plug-assist tool material, and process conditions on the mechanical pre-stretching stage of plug-assist thermoforming

Authors: Oualid Atmani, Fazilay Abbès, Yuming Li, Serge Batkam, Boussad Abbès

Published in: The International Journal of Advanced Manufacturing Technology | Issue 7-8/2022

Activate our intelligent search to find suitable subject content or patents.

search-config

AI-assisted search

Off

Abstract

Plug-assist thermoforming is a complex process with numerous parameters influencing the quality of the manufactured product. The pre-stretching stage is the most important step in plug-assist thermoforming. Mechanical pre-stretching is used to redistribute material from thicker regions to thinner ones with a plug-assist tool. Experimental tests do not assess all potentially relevant influences. Numerical simulations are therefore useful to achieve a deeper understanding of the process and the mutual interactions between the input parameters. In this paper, we develop thermoelastoviscoplastic polymer behavior and thermomechanical friction finite element models to simulate the plug-assist pre-stretching of high-impact polystyrene, amorphous polyethylene terephthalate, and lightweight polystyrene sheets. The effects of plug-assist tool materials and process conditions are experimentally and numerically analyzed. Plug pre-stretching force and thickness distribution of the simulated test match well with the measured results. The proposed models accounting for the main thermomechanical aspects of the plug-assist thermoforming process provide a way to predict the quality of thermoformed parts.

previous article Processing and microstructure analysis on the precision rotary swaging of inner-stepped aero-engine shaft

next article The effect of contactless support parameters on the mechanical properties of laser powder bed fusion produced overhang parts

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

inform now

Schwarzmann P (2019) Thermoforming A Practical Guide, Ed. ILLIG Maschinenbau GmbH & Co, Hanser Publishers, Munich. https://doi.org/10.3139/9781569907092

McCool R, Martin PJ (2011) Thermoforming process simulation for the manufacture of deep-draw plastic food packaging. Proc Insti Mech Eng Part E J Process Mech Eng 225(4):269–279. https://doi.org/10.1177/0954408911416292CrossRef

Bernard CA, Correia JPM, Bahlouli N, Ahzi S (2013) Numerical simulation of plug-assisted thermoforming process: application to polystyrene. Key Eng Mater 554–557:1602–1610. https://doi.org/10.4028/www.scientific.net/KEM.554-557.1602CrossRef

Martin PJ, Choo HL, O’Connor CPJ (2012) Measurement and modelling of slip during plug-assisted thermoforming. Key Eng Mater 504–506:1105–1110. https://doi.org/10.4028/www.scientific.net/KEM.504-506.1105CrossRef

McCool R, Martin PJ (2010) The role of process parameters in determining wall thickness distribution in plug-assisted thermoforming. Polym Eng Sci 50:1923–1934. https://doi.org/10.1002/pen.21718CrossRef

Aroujalian A, Ngadi MO, Emond JP (2004) Wall thickness distribution in plug-assist vacuum formed strawberry containers. Polym Eng Sci 37:178–182. https://doi.org/10.1002/pen.11659CrossRef

Ghobadnam M, Mosaddegh P, Rejani MR, Amirabadi H, Ghaei A (2015) Numerical and experimental analysis of HIPS sheets in thermoforming process. Int J Adv Manuf Technol 76:1079–1089. https://doi.org/10.1007/s00170-014-6329-yCrossRef

Dong Y, Lin RJT, Bhattacharyya D (2006) Finite element simulation on thermoforming acrylic sheets using dynamic explicit method. Polym Polym Compos 14:307–328. https://doi.org/10.1177/096739110601400310CrossRef

Hosseini H, Berdyshev BV, Mehrabani-Zeinabad A (2006) A solution for warpage in polymeric products by plug-assisted thermoforming. Eur Polym J 42:1836–1843. https://doi.org/10.1016/j.eurpolymj.2006.03.020CrossRef

10.

Morales RA, Candal MV, Santana OO, Gordillo A, Salazar R (2014) Effect of the thermoforming process variables on the sheet friction coefficient. Mater Des 53:1097–1103. https://doi.org/10.1016/j.matdes.2013.08.009CrossRef

11.

Novotný P, Sáha P, Kouba K (1999) Fitting of K-BKZ model parameters for the simulation of thermoforming. Int Polym Process 14:291–295. https://doi.org/10.3139/217.1543CrossRef

12.

O’Connor CPJ, Martin PJ, Sweeney J, Menary G, Caton-Rose P, Spencer PE (2013) Simulation of the plug-assisted thermoforming of polypropylene using a large strain thermally coupled constitutive model. J Mater Process Technol 213:1588–1600. https://doi.org/10.1016/j.jmatprotec.2013.02.001CrossRef

13.

Hosseini H, Vasilivich BB, Mehrabani-Zeinabad A (2006) Rheological modeling of plug-assist thermoforming. J Appl Polym Sci 101:4148–4152. https://doi.org/10.1002/app.23436CrossRef

14.

Kaye A (1962) Non-Newtonian flow in incompressible fluids: part 1, 2 and 3. College of Aeronautics Note 134, Cranfield, UK. http://dspace.lib.cranfield.ac.uk/handle/1826/12105

15.

Bernstein B, Kearsley EA, Zapas LJ (1963) A study of stress relaxation with finite strain. Trans Soc Rheol 7:391–410. https://doi.org/10.1122/1.548963CrossRefMATH

16.

Kittikanjanaruk T, Patcharaphun S (2013) Computer simulation and experimental investigations of wall-thickness distribution in high impact polystyrene and amorphous polyethylene terephthalate thermoformed parts. Kasetsart J Nat Sci 47:302–309

17.

Cha J, Kim M, Park D, Go JS (2019) Experimental determination of the viscoelastic parameters of K-BKZ model and the influence of temperature field on the thickness distribution of ABS thermoforming. Int J Adv Manuf Technol 103:985–995. https://doi.org/10.1007/s00170-019-03408-8CrossRef

18.

Cha J, Song HY, Hyun K, Go JS (2020) Rheological measurement of the nonlinear viscoelasticity of the ABS polymer and numerical simulation of thermoforming process. Int J Adv Manuf Technol 107:2449–2464. https://doi.org/10.1007/s00170-020-04979-7CrossRef

19.

Sala G, Cassago D, Di Landro L (2002) A numerical and experimental approach to optimise sheet stamping technologies: polymers thermoforming. Mater Des 23:21–39. https://doi.org/10.1016/S0261-3069(01)00037-1CrossRef

20.

Atmani O, Abbès F, Li Y, Batkam S, Abbès B (2020) Experimental investigation and constitutive modelling of the deformation behaviour of high impact polystyrene for plug-assisted thermoforming. Mech Ind 21:607. https://doi.org/10.1051/meca/2020084CrossRef

21.

Ben Aoun N, Erchiqui F, Mrad H, Dituba-Ngoma G, Godard F (2020) Viscoelastic characterization of high-density polyethylene membranes under the combined effect of the temperature and the gravity for thermoforming applications. Polym Eng Sci 60:2676–2684. https://doi.org/10.1002/pen.25513CrossRef

22.

Takaffoli M, Hangalur G, Bakker R, Chandrashekar N (2020) Thermo-visco-hyperelastic behavior of polycarbonate in forming of a complex geometry. J Manuf Proc 57:105–113. https://doi.org/10.1016/j.jmapro.2020.06.019CrossRef

23.

Wei H (2021) Optimisation on Thermoforming of biodegradable poly (lactic acid) (PLA) by numerical modelling. Polymers 13:654. https://doi.org/10.3390/polym13040654CrossRef

24.

Adams AM, Buckley CP, Jones DP (2000) Biaxial hot drawing of poly(ethylene terephthalate): measurements and modelling of strain-stiffening. Polymer 41:771–786. https://doi.org/10.1016/S0032-3861(98)00834-9CrossRef

25.

Selezneva M, Naouar N, Denis Y, Gorbatikh L, Hine P, Lomov SV, Swolfs Y, Verpoest I, Boisse P (2021) Identification and validation of a hyperelastic model for self-reinforced polypropylene draping. Int J Mater Form 14:55–65. https://doi.org/10.1007/s12289-020-01542-3CrossRef

26.

Stamopoulos AG, Di Ilio A, Di Genova LG (2021) Simulation of the thermoforming process of glass fiber–reinforced polymeric components: investigation of the combined effect of the crosshead speed and material temperature. Int J Adv Manuf Technol 117:2987–3009. https://doi.org/10.1007/s00170-021-07845-2CrossRef

27.

Sánchez E, Nájera A, Sotomayor O (2022) Numerical study of the viscoelastic mechanical response of polystyrene in the process of thermoforming through the generalized Maxwell model. Mater Today Proc 49:107–114. https://doi.org/10.1016/j.matpr.2021.07.480CrossRef

28.

Turan E, Konuşkan Y, Yıldırım N, Tunçalp D, İnan M, Yasin O, Turan B, Kerimoğlu V (2022) Digital twin modelling for optimizing the material consumption: a case study on sustainability improvement of thermoforming process. Sustain Comput Inf Syst 35:100655. https://doi.org/10.1016/j.suscom.2022.100655CrossRef

29.

Wagner S, Sheikhi R, Kayatz F, Münsch M, Hauptmann M, Delgado A (2022) Fluid–structure-interaction simulations of forming-air impact thermoforming. Polym Eng Sci 62:1294–1309. https://doi.org/10.1002/pen.25926CrossRef

30.

Bergstrom JS (2015) Mechanics of solid polymers: theory and computational modeling. William Andrew. https://doi.org/10.1016/C2013-0-15493-1CrossRef

31.

Wagner S, Kayatz F, Münsch M, Sanjon CW, Hauptmann M, Delgado A (2022) Numerical modeling of forming air impact thermoforming. Int J Adv Manuf Technol 120:4917–4933. https://doi.org/10.1007/s00170-022-08944-4CrossRef

32.

Nam GJ, Lee JW (1999) Finite element analysis of the effect of processing conditions on thermoforming. J Reinf Plast Compos 18(7):673–682. https://doi.org/10.1177/073168449901800708CrossRef

33.

Laroche D, Collins P, Martin P (2001) Modelling of the effect of slip in plug-assisted thermoforming. SPE ANTEC Conf Proc. Society of Plastic Engineers, Dallas, Texas, USA, pp 810–814

34.

Collins P, Lappin JF, Harkin-Jones EMA, Martin PJ (2000) Effects of material properties and contact conditions in modelling of plug assisted thermoforming. Plast Rubber Compos 29:349–359CrossRef

35.

Patil J, Vilas N, Sushil M, Sandip S (2020) Contact analysis for contact thermoforming of PMMA sheet. Mater Perform Charact 9:20190117. https://doi.org/10.1520/MPC20190117CrossRef

36.

G’Sell C, Jonas JJ (1979) Determination of the plastic behavior of solid polymers at constant true strain rate. J Mater Sci 14:583–591. https://doi.org/10.1007/BF00772717CrossRef

37.

G’Sell C, Aly-Helal NA, Jonas JJ (1983) Effect of stress triaxiality on neck propagation during the tensile stretching of solid polymers. J Mater Sci 18:1731–1742. https://doi.org/10.1007/BF00542069CrossRef

38.

Duffo P, Monasse B, Haudin JM, G’Sell C, Dahoun A (1995) Rheology of polypropylene in the solid state. J Mater Sci 30:701–711. https://doi.org/10.1007/BF00356330CrossRef

39.

G’Sell C (1998) Instabilités de déformation pendant l’étirage des polymères solides. Rev Phys Appl 23:1085–1101. https://doi.org/10.1051/rphysap:019880023060108500CrossRef

40.

Abbès B, Zaki O, Safa L (2010) Experimental and numerical study of the aging effects of sorption conditions on themechanical behaviour of polypropylene bottles under columnar crush conditions. Polym Test 29:902–909. https://doi.org/10.1016/j.polymertesting.2010.06.002CrossRef

41.

Abbès F, Tran NG, Abbès B, Guo YQ (2017) Modelling of the degradation of mechanical properties of high-density polyethylene-based packaging exposed to amyl acetate solution. Polym Test 59:449–461. https://doi.org/10.1016/j.polymertesting.2017.03.005CrossRef

Title: Experimental and numerical investigation of the effects of sheet material, plug-assist tool material, and process conditions on the mechanical pre-stretching stage of plug-assist thermoforming
Authors: Oualid Atmani
Fazilay Abbès
Yuming Li
Serge Batkam
Boussad Abbès
Publication date: 13-09-2022
Publisher: Springer London
Published in: The International Journal of Advanced Manufacturing Technology / Issue 7-8/2022
Print ISSN: 0268-3768
Electronic ISSN: 1433-3015
DOI: https://doi.org/10.1007/s00170-022-10125-2

Springer Professional

Abstract

Please log in to get access to your license.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Other articles of this Issue 7-8/2022

Tool positioning in five-axis machining on a tensor product surface using circular rays

Influence of sub-surface deformation induced by machining on stress corrosion cracking in lead-free brass

Manufacturing of durable tribological surface by grinding process

Influence of dimension, building position, and orientation on mechanical properties of EBM lattice Ti6Al4V trusses

Machinability of partition milling stainless steel/Inconel functionally gradient material printed with directed energy deposition

Processing and microstructure analysis on the precision rotary swaging of inner-stepped aero-engine shaft

Premium Partners