Top

The International Journal of Advanced Manufacturing Technology

Published in:

02-10-2020 | ORIGINAL ARTICLE

Experimental and numerical prediction and comprehensive compensation of springback in cold roll forming of UHSS

Authors: Xiao-li Liu, Jian-guo Cao, Su-xia Huang, Bin Yan, Yan-lin Li, Rong-guo Zhao

Published in: The International Journal of Advanced Manufacturing Technology | Issue 3-4/2020

Activate our intelligent search to find suitable subject content or patents.

search-config

AI-assisted search

Off

Abstract

Ultra-high-strength steels (UHSS), for instance, dual phase (DP) and martensitic steels, get growing challenges in strip metal forming processes of car industry manufacturing to achieve lightweight and improve passenger security. Predict and compensate for springback is still a major problems to be solved in cold roll forming (CRF) for complex section materials. In this study, the springback performance UHSS in cold roll forming is discussed by simulation and experimental methods. At the same time, one 3D FEA model was established to analyze the CRF process by COPPA RF and MSC MARC, in which planar swift’s model, anisotropic Hill’s 48 model, and Yid2000-2d model in the company with Yoshida-Uemori kinematic hardening pattern were investigated. Automobile threshold section CRF experiment and springback evaluation carried out through the comparison of numerical results. Considering Yoshida-Uemori kinematic hardening, the anisotropic Yid2000-2d model improves the springback prediction accuracy in CRF car threshold section in comparison with other models. The improved model is used to compensate the springback of product. A new method is proposed, which takes into account angle overbending compensation (AOC), small radius compensation (SRC), and revere-bending compensation (RBC) based on roll shape design. The method, which we call “USTB-Durable Integration of Springback Control (UDI),” is general for it considers the fact radius and angle would occur during springback. Compared with the AOC, SRC, and RBC method, the new method has higher precision especially for the springback compensation of ultra-high-strength complex section in CRF. The researchers are expected to conduct design engineer to calculate and compensate the springback trend before applying roller design to actual production.

previous article Hybrid subtractive–additive manufacturing processes for high value-added metal components

next article In situ three-dimensional laser machining system integrating in situ measurement, reconstruction, parameterization, and texture mapping

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

inform now

Sun Y, Li YG, Liu ZB, Daniel WJT, Shi L, Meehan PA, Ding SC (2017) Experimental investigation and prediction of the maximum edge longitudinal membrane strain and springback of chain-die-formed AHSS U-channels using response surface methodology. Int J Adv Manuf Technol 90(5–8):1963–1976. https://doi.org/10.1007/s00170-016-9522-3CrossRef

Halmos GT (2006) Roll forming handbook, 1st edn. Crc Press, New York

Li ZX, Shu XD, Yin AM, Guo DL (2018) Experimental and numerical analysis on the forming and shearing quality of C-channel steel. Int J Adv Manuf Technol 94(9):3665–3678. https://doi.org/10.1007/s00170-017-1109-0CrossRef

Toros S, Polat A, Ozturk F (2012) Formability and springback characterization of TRIP800 advanced high strength steel. Mater Design 41:298–305. https://doi.org/10.1016/j.matdes.2012.05.006CrossRef

Taherizadeh A, Green DE, Yoon JW (2011) Evaluation of advanced anisotropic models with mixed hardening for general associated and non-associated flow metal plasticity. Int J Plast 27(11):1781–1802. https://doi.org/10.1016/j.ijplas.2011.05.001CrossRefMATH

Xue X, Liao J, Vincze G, Sousa J, Barlat F, Gracio J (2016) Modelling and sensitivity analysis of twist springback in deep drawing of dual-phase steel. Mater Des 90:204–217. https://doi.org/10.1016/j.matdes.2015.10.127CrossRef

Liao J, Xue X, Lee M, Barlat F, Vincze G, Pereira AB (2017) Constitutive modeling for path-dependent behavior and its influence on twist springback. Int J Plast 93:64–88. https://doi.org/10.1016/j.ijplas.2017.02.009CrossRef

Li YG, Sun Y, Xiao H, Bong HJ, Shi L, Li SH, Li DY, Ding SC, Wagoner RH (2018) A numerical study on chain-die forming of the AHSS U-channel and contrast with roll forming. Int J Mech Sci 135:279–293. https://doi.org/10.1016/j.ijmecsci.2017.11.034CrossRef

Sun Y, Li YG, Li DY, Meehan PA, Daniel WJT, Shi L, Xiao H, Zhang JC, Ding SC (2019) Predictive modelling of longitudinal bow in chain-die formed AHSS profiles and its experimental verification. J Manuf Process 39:208–225. https://doi.org/10.1016/j.jmapro.2019.02.007CrossRef

10.

Liu XL, Cao JG, Chai XT, He ZL, Liu J, Zhao RG (2018) Experimental and numerical prediction of the local thickness reduction defect of complex cross-sectional steel in cold roll forming. Int J Adv Manuf Technol 95(5–8):1837–1848. https://doi.org/10.1007/s00170-017-1279-9CrossRef

11.

Bui QV, Ponthot JP (2008) Numerical simulation of cold roll-forming processes. J Mater Process Technol 202(1–3):275–282. https://doi.org/10.1016/j.jmatprotec.2007.08.073CrossRef

12.

Zeng G, Li SH, Yu ZQ, Lai XM (2009) Optimization design of roll profiles for cold roll forming based on response surface method. Mater Des 30(6):1930–1938. https://doi.org/10.1016/j.matdes.2008.09.018CrossRef

13.

Shirani Bidabadi B, Moslemi Naeini H, Azizi Tafti R, Mazdak S (2015) Experimental investigation of the ovality of holes on pre-notched channel products in the cold roll forming process. J Mater Process Technol 225:213–220. https://doi.org/10.1016/j.jmatprotec.2015.06.008CrossRef

14.

Shirani Bidabadi B, Moslemi Naeini H, Azizi Tafti R, Barghikar H (2016) Experimental study of bowing defects in pre-notched channel section products in the cold roll forming process. Int J Adv Manuf Technol 87(1–4):997–1011. https://doi.org/10.1007/s00170-016-8547-yCrossRef

15.

Wiebenga JH, Weiss M, Rolfe B, Boogaard AH (2013) Product defect compensation by robust optimization of a cold roll forming process. J Mater Process Technol 213(6):978–986. https://doi.org/10.1016/j.jmatprotec.2013.01.006CrossRef

16.

Park J, Yang D, Cha M, Kim D, Nam J (2014) Investigation of a new incremental counter forming in flexible roll forming to manufacture accurate profiles with variable cross-sections. Int J Mach Tool Manu 86:68–80. https://doi.org/10.1016/j.ijmachtools.2014.07.001CrossRef

17.

Badr OM, Rolfe B, Hodgson P, Weiss M (2015) Forming of high strength titanium sheet at room temperature. Mater Des 66:618–626. https://doi.org/10.1016/j.matdes.2014.03.008CrossRef

18.

Wang HB, Yan Y, Jia FH, Han F (2016) Investigations of fracture on DP980 steel sheet in roll forming process. J Manuf Process 22:177–184. https://doi.org/10.1016/j.jmapro.2016.03.008CrossRef

19.

Shirani Bidabadi B, Moslemi Naeini H, Azizi Tafti R (2017) Experimental and numerical study of required torque in the cold roll forming of symmetrical channel sections. J Manuf Process 27:63–75. https://doi.org/10.1016/j.jmapro.2017.04.026CrossRef

20.

Weiss M, Abeyrathna B, Gangoda DS, Mendiguren J, Wolfkamp H (2017) Bending behaviour and oil canning in roll forming a steel channel. Int J Adv Manuf Technol 91(5–8):2875–2884. https://doi.org/10.1007/s00170-016-9892-6CrossRef

21.

Sun Y, Li YG, Daniel WJT, Meehan PA, Liu ZB, Ding SC (2017) Longitudinal strain development in chain-die forming AHSS products: analytical modelling, finite element analysis and experimental verification. J Mater Process Technol 243:322–334. https://doi.org/10.1016/j.jmatprotec.2016.12.019CrossRef

22.

Weiss M, Abeyrathna B, Rolfe B, Abee A, Wolfkamp H (2017) Effect of coil set on shape defects in roll forming steel strip. J Manuf Process 25:8–15. https://doi.org/10.1016/j.jmapro.2016.10.005CrossRef

23.

Weiss M, Abeyrathna B, Pereira M (2018) Roll formability of aluminium foam sandwich panels. Int J Adv Manuf Technol 97(1):953–965. https://doi.org/10.1007/s00170-018-1945-6CrossRef

24.

Lee J, Kim D, Quagliato L, Kang S, Kim N (2017) Change of the yield stress in roll formed ERW pipes considering the Bauschinger effect. J Mater Process Technol 244:304–313. https://doi.org/10.1016/j.jmatprotec.2017.01.022CrossRef

25.

Mohammdi Najafabadi H, Moslemi Naeini H, Safdarian R, Kasaei MM, Akbari D, Abbaszadeh B (2019) Effect of forming parameters on edge wrinkling in cold roll forming of wide profiles. Int J Adv Manuf Technol 101(1–4):181–194. https://doi.org/10.1007/s00170-018-2885-xCrossRef

26.

Woo YY, Han SW, Hwang TW, Park JY, Moon YH (2018) Characterization of the longitudinal bow during flexible roll forming of steel sheets. J Mater Process Technol 252:782–794. https://doi.org/10.1016/j.jmatprotec.2017.10.048CrossRef

27.

Traub T, Chen X, Groche P (2017) Experimental and numerical investigation of the bending zone in roll forming. Int J Mech Sci 131-132:956–970. https://doi.org/10.1016/j.ijmecsci.2017.07.056CrossRef

28.

Deole AD, Barnett MR, Weiss M (2018) The numerical prediction of ductile fracture of martensitic steel in roll forming. Int J Solids Struct 144-145:20–31. https://doi.org/10.1016/j.ijsolstr.2018.04.011CrossRef

29.

Chen WY, Jiang JM, Li DY, Zou TX, Peng YH (2019) Flower pattern and roll positioning design for the cage roll forming process of ERW pipes. J Mater Process Technol 264:295–312. https://doi.org/10.1016/j.jmatprotec.2018.09.007CrossRef

30.

Su CJ, Yang LY, Lou SL, Wang Q, Wang R (2019) Research on roll forming process based on five-boundary condition forming angle distribution function. Int J Adv Manuf Technol 102:3767–3779. https://doi.org/10.1007/s00170-019-03377-yCrossRef

31.

Liu XL, Cao JG, Chai XT, Liu J, Zhao RG, Kong N (2017) Investigation of forming parameters on springback for ultra high strength steel considering Young’s modulus variation in cold roll forming. J Manuf Process 29:289–297. https://doi.org/10.1016/j.jmapro.2017.08.001CrossRef

32.

Paralikas J, Salonitis K, Chryssolouris G (2011) Investigation of the effect of roll forming pass design on main redundant deformations on profiles from AHSS. Int J Adv Manuf Technol 56(5–8):475–491. https://doi.org/10.1007/s00170-011-3208-7CrossRef

33.

Paralikas J, Salonitis K, Chryssolouris G (2009) Investigation of the effects of main roll-forming process parameters on quality for a V-section profile from AHSS. Int J Adv Manuf Technol 44(3–4):223–237. https://doi.org/10.1007/s00170-008-1822-9CrossRef

34.

Paralikas J, Salonitis K, Chryssolouris G (2010) Optimization of roll forming process parameters—a semi-empirical approach. Int J Adv Manuf Technol 47(9–12):1041–1052. https://doi.org/10.1007/s00170-009-2252-zCrossRef

35.

Badr OM, Rolfe B, Zhang P, Weiss M (2017) Applying a new constitutive model to analyse the springback behaviour of titanium in bending and roll forming. Int J Mech Sci 128-129:389–400. https://doi.org/10.1016/j.ijmecsci.2017.05.025CrossRef

36.

Badr OM, Rolfe B, Weiss M (2018) Effect of the forming method on part shape quality in cold roll forming high strength Ti-6Al-4V sheet. J Manuf Process 32:513–521. https://doi.org/10.1016/j.jmapro.2018.03.022CrossRef

37.

Groche P, Beiter P, Henkelmann M (2008) Prediction and inline compensation of springback in roll forming of high and ultra-high strength steels. Prod Eng 2(4):401–407. https://doi.org/10.1007/s11740-008-0131-3CrossRef

38.

Abeyrathna (2014) In-line shape compensation for roll forming through process parameter monitoring. Doctor of Philosophy, Deakin University, Melbourne

39.

Choi MK, Huh H, Park N (2017) Process design of combined deep drawing and electromagnetic sharp edge forming of DP980 steel sheet. J Mater Process Technol 244:331–343. https://doi.org/10.1016/j.jmatprotec.2017.01.035CrossRef

40.

Chen Z, Bong HJ, Li D, Wagoner RH (2016) The elastic–plastic transition of metals. Int J Plast 83:178–201. https://doi.org/10.1016/j.ijplas.2016.04.009CrossRef

41.

Choi J, Lee J, Bong HJ, Lee M, Barlat F (2018) Advanced constitutive modeling of advanced high strength steel sheets for springback prediction after double stage U-draw bending. Int J Solids Struct 151:152–164. https://doi.org/10.1016/j.ijsolstr.2017.09.030CrossRef

42.

Hill R (1948) A theory of the yielding and plastic flow of anisotropic metals. Proc R Soc Lond A Math Phys Eng Sci 193(1033):281–297MathSciNetMATH

43.

Dadgar Asl Y, Sheikhi M, Pourkamali Anaraki A, Panahizadeh RV, Hoseinpour Gollo M (2017) Fracture analysis on flexible roll forming process of anisotropic Al6061 using ductile fracture criteria and FLD. Int J Adv Manuf Technol 91(5–8):1481–1492. https://doi.org/10.1007/s00170-016-9852-1CrossRef

44.

Barlat F, Brem JC, Yoon JW, Chung K, Dick RE, Lege DJ, Pourboghrat F, Choi SH, Chu E (2003) Plane stress yield function for aluminum alloy sheets—part 1: theory. Int J Plast 19(9):1297–1319. https://doi.org/10.1016/S0749-6419(02)00019-0CrossRefMATH

45.

Yoshida F, Uemori T (2003) A model of large-strain cyclic plasticity and its application to springback simulation. Int J Mech Sci 45(10):1687–1702. https://doi.org/10.1016/j.ijmecsci.2003.10.013CrossRefMATH

46.

Yoshida F, Uemori T (2002) A model of large-strain cyclic plasticity describing the Bauschinger effect and work hardening stagnation. Int J Plast 18(5):661–686. https://doi.org/10.1016/S0749-6419(01)00050-XCrossRefMATH

47.

Yoshida F, Uemori T, Fujiwara K (2002) Elastic–plastic behavior of steel sheets under in-plane cyclic tension–compression at large strain. Int J Plast 18(5):633–659. https://doi.org/10.1016/S0749-6419(01)00049-3CrossRefMATH

48.

Yu HY, Shen JY (2014) Evolution of mechanical properties for a dual-phase steel subjected to different loading paths. Mater Des 63:412–418. https://doi.org/10.1016/j.matdes.2014.06.003CrossRef

49.

Muller M, Barrans SM, Blunt L (2011) Predicting plastic deformation and work hardening during V-band formation. J Mater Process Technol 211(4):627–636. https://doi.org/10.1016/j.jmatprotec.2010.11.020CrossRef

50.

Abvabi A, Rolfe B, Hodgson PD, Weiss M (2015) The influence of residual stress on a roll forming process. Int J Mech Sci 101-102:124–136. https://doi.org/10.1016/j.ijmecsci.2015.08.004CrossRef

51.

Li KP, Carden WP, Wagoner RH (2002) Simulation of springback. Int J Mech Sci 44(1):103–122. https://doi.org/10.1016/S0020-7403(01)00083-2CrossRefMATH

52.

Xu HJ, Liu YQ, Zhong W (2012) Three-dimensional finite element simulation of medium thick plate metal forming and springback. Finite Elem Anal Des 51:49–58. https://doi.org/10.1016/j.finel.2011.10.008CrossRef

Title: Experimental and numerical prediction and comprehensive compensation of springback in cold roll forming of UHSS
Authors: Xiao-li Liu
Jian-guo Cao
Su-xia Huang
Bin Yan
Yan-lin Li
Rong-guo Zhao
Publication date: 02-10-2020
Publisher: Springer London
Published in: The International Journal of Advanced Manufacturing Technology / Issue 3-4/2020
Print ISSN: 0268-3768
Electronic ISSN: 1433-3015
DOI: https://doi.org/10.1007/s00170-020-06133-9

Springer Professional

Abstract

Please log in to get access to your license.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Other articles of this Issue 3-4/2020

Efficient trochoidal milling based on medial axis transformation and inscribed ellipse

On the integration of FBG sensing technology into robotic grippers

Dynamic performance test under complicated motion states for five-axis machine tools based on double ballbar

Hybrid subtractive–additive manufacturing processes for high value-added metal components

Evaluation of the effects of the metal foams geometrical features on thermal and fluid-dynamical behavior in forced convection

Influence of wire-arc additive manufacturing path planning strategy on the residual stress status in one single buildup layer

Premium Partners