Top

European Journal of Wood and Wood Products

Published in:

01-09-2003 | Originalarbeit

Experimental cutting on the table band-sawing mashine

Author: Š. Barcík

Published in: European Journal of Wood and Wood Products | Issue 4/2003

Activate our intelligent search to find suitable subject content or patents.

search-config

AI-assisted search

Off

Abstract

This article presents the results of experiments, aimed at studying the influence of chosen technical and technological factors (cutting speed, width of saw band, cutting height, radius of sawing) on the side deflection of the saw band of a table bandsawing machine in curvilinear sawing. The contactless opto-elektronical method was used for observation. The light deflection of the reflected infrared ray from the tool was measured by means of a planar diode.

previous article Density variations in spruce wood with indented rings (Picea abies Karst)

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Wirtschaft"

Online-Abonnement

Mit Springer Professional "Wirtschaft" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 340 Zeitschriften

aus folgenden Fachgebieten:

Bauwesen + Immobilien
Business IT + Informatik
Finance + Banking
Management + Führung
Marketing + Vertrieb
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

inform now

Barcík Š, Naščák L (1999) Contactless method of measurement of saw blade lateral deflection of universal table bandsawing machine. In: 2. Medzinárodná vedecká konferencia Stroj-Nástroj-Obrobok, Nitra, október 1999:23–27

Goglia V, Beljo R (1995) Lateral movement of the band saw blade and machine's own resistance power in relation to the strain force. IUFRO XX World Congress, Finland (Tampere), August 1995, pp 1-19

Ling K, Kimura S, Yokochi H (1989) Band saw vibration III. Foreed vibration of a guided band saw during no-load running. Japan J 35:710–717

Lisičan J (1976) (Drevárske stroje a obrábanie I. Časť 1. (Kinematika procesov obrábania dreva), VŠLD, ES, 1976, pp 98–103

Mote CD (1965) Some dynamic characteristies of band saw. Forest Prod J 1:37–41

Mote CD (1993) The theory volltensioning of bandsaw. II. In: Internacional Wood Machining Seminar 1993, pp 409–441

Pahlitzsch G, Puttkamer K (1976) Beurteilungskriterien für die Auslenkungen von Sägeblättern I, II, III Mitteilung. Holz Roh- Werkstoff 32:55–57, 295–302, 413–426

Pahlitzsch G, Puttkamer K (1974) Schnittversuche beim Bandsägen. Holz Roh- Werkstoff 39:17–21

Saito Y, Mori M (1953) On the buckling of a band saw blade (part 1). Wood Industry 76(8):20–23

Sanev VI (1960) O nagreve lentočnych pil pri raspilovke drevesiny na lentočno-pil'nych stankoch. Lesnoj žurnal 3:64–67

Siklienka M, Salva P, Kosut J (1997) Theoretical analysis of influence at the delivery rolling guide on the bending stresses in saw band. In: Acta facultatis technicae, Ročník 1:89–93

Thunell B (1970) Stabilität des Bandsägeblatts. Mitteilung aus dem Schwedischen Holzforschungsinstitut Stockholm. Holz Roh- Werkstoff 28:343–348

Varakin MJ (1980) K voprosu o vlijanii nagreva na rabotosposobnosť lentočnych pil. Mežvus. Sb. Nauč. Truda 1980, pp 16–19

Zhao Ch, Tanaka Ch, Nakao T, Takahashi A (1991) Adaptive control optimalization in Band Sawing I. Monitoring methods of band saw deviation in sawing. Japan J 37(10):897–903

Title: Experimental cutting on the table band-sawing mashine
Author: Š. Barcík
Publication date: 01-09-2003
Publisher: Springer-Verlag
Published in: European Journal of Wood and Wood Products / Issue 4/2003
Print ISSN: 0018-3768
Electronic ISSN: 1436-736X
DOI: https://doi.org/10.1007/s00107-002-0342-9

Springer Professional

Abstract

Please log in to get access to your license.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Wirtschaft"

Springer Professional "Technik"

Other articles of this Issue 4/2003

Density variations in spruce wood with indented rings (Picea abies Karst)

Observation of anisotropic water movement in Pinus radiata D. Don sapwood above fiber saturation using magnetic resonance micro-imaging

Mixed glued laminated timber of poplar and Eucalyptus grandis clones

Measuring the shear strength ratio of glued joints within the same specimen

The relationship between longitudinal growth strain and the occurrence of gelatinous fibers in 10 and 11-year-old Eucalyptus globulus Labill.

Dimensional changes of extracted and non-extracted small wood specimens of black locust (Robinia pseudoacacia L.)