Top

Metallurgical and Materials Transactions A

Published in:

01-01-2019 | Communication

Fatigue Resistance of Laminated and Non-laminated TRIP-maraging Steels: Crack Roughness vs Tensile Strength

Authors: Zhao Zhang, Motomichi Koyama, Meimei Wang, Cemal Cem Tasan, Hiroshi Noguchi

Published in: Metallurgical and Materials Transactions A | Issue 3/2019

Activate our intelligent search to find suitable subject content or patents.

search-config

AI-assisted search

Off

Abstract

Pre-cold-rolling before annealing in transformation-induced plasticity (TRIP) maraging steels changes the microstructural morphology from lamellar to granular, increasing the tensile strength. However, fatigue tests of plain specimens at ambient temperature and the stress ratio − 1 show that increased strength does not improve the fatigue strength compared to laminated TRIP-maraging steel, irrespective of stress amplitude. The disappearance of fatigue crack roughness suppresses the improvement in fatigue resistance with increasing strength.

previous article Lowering Strain Rate Simultaneously Enhances Carbon- and Hydrogen-Induced Mechanical Degradation in an Fe-33Mn-1.1C Steel

next article Scalable Ultrasound-Assisted Casting of Ultra-large 2219 Al Alloy Ingots

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

inform now

Available only for authorised users

[1] M. Koyama, Z. Zhang, M. M. Wang, D. Ponge, D. Raabe, K. Tsuzaki, H. Noguchi and C. C. Tasan: Science, 2017, 355(6329), pp. 1055-1057.CrossRef

[2] R. O. Ritchie: Mater. Sci. Eng. A, 1988, 103(1), pp. 15-28.CrossRef

[3] H. R. Mayer, S. E. Stanzl‐Tschegg, Y. Sawaki, M. Hühner and E. Hornbogen: Fatigue Fract. Eng. Mater. Struct., 1995, 18(9), pp. 935-948.CrossRef

[4] S. Suresh: Mater. Sci. Eng. A, 1983, 14(11), pp. 2375-2385.

[5] G. T. Gray, J. C. Williams and A. W. Thompson: Mater. Sci. Eng. A, 1983, 14(2), pp. 421-433.

[6] Y. Murakami: Metal fatigue: effects of small defects and nonmetallic inclusions, Elsevier. Amsterdam, the Netherlands, 2002.

[7] M. M. Wang, C. C. Tasan, D. Ponge and D. Raabe: Acta Mater., 2016, 111, pp. 262-272.CrossRef

[8] J. C. Pang, S.X. Li, Z.G. Wang and Z.F. Zhang: Mater. Sci. Eng. A, 2013, 564, pp. 331-341.CrossRef

[9] X. Lin, M. Koyama, S. Gao, N. Tsuji, K. Tsuzaki and H. Noguchi: Int. J. Fatigue, 2019, 118, pp. 117-125.CrossRef

10.

[10] T. Niendorf, F. Rubitschek, H. J. Maier, D. Canadinc and I. Karaman: J. Mater. Sci., 2010, 45(17), pp. 4813-4821.CrossRef

11.

[11] S. Hamada, T. Kinoshita, K. Morishige, K. Hayashi, T. Ishina and H. Noguchi: Int. J. Fatigue, 2013, 56, pp. 86-94.CrossRef

12.

[12] N. Fukumura, T. Suzuki, S. Hamada, K. Tsuzaki and H. Noguchi: Eng. Fract. Mech., 2015, 135, pp. 168-186.CrossRef

13.

[13] T. Miyazaki, H. Noguchi and K. Ogi: Int. J. Fract., 2004, 129(1), pp. 21-38.CrossRef

14.

[14] M. M. Wang, C. C. Tasan, D. Ponge, A. Kostka and D. Raabe: Acta Mater., 2014, 79, pp. 268-281.CrossRef

15.

[15] M. M. Wang, C. C. Tasan, D. Ponge, A. Ch Dippel and D. Raabe: Acta Mater., 2015, 85, pp. 216-228.CrossRef

16.

Z. Zhang, M. Koyama, M. M. Wang, K. Tsuzaki, C. C. Tasan and H. Noguchi: Int. J. Fatigue, 2017, 100(Part 1), pp. 176-186.CrossRef

17.

[17] Z. Zhang, M. Koyama, M. M. Wang, K. Tsuzaki, C. C. Tasan and H. Noguchi: Int. J. Fatigue, 2018, 113, pp. 126-136.CrossRef

18.

[18] H. Suzuki and A. J. Mcevily: Metall. Trans. A, 1979, 10(4), pp. 475-481.CrossRef

19.

[19] M. Koyama, J.X. Zhou, Y. Yoshida, N. Yoshimura, K. Ushioda and H. Noguchi: ISIJ Int., 2015, 55(11), pp. 2463-2468.CrossRef

Title: Fatigue Resistance of Laminated and Non-laminated TRIP-maraging Steels: Crack Roughness vs Tensile Strength
Authors: Zhao Zhang
Motomichi Koyama
Meimei Wang
Cemal Cem Tasan
Hiroshi Noguchi
Publication date: 01-01-2019
Publisher: Springer US
Published in: Metallurgical and Materials Transactions A / Issue 3/2019
Print ISSN: 1073-5623
Electronic ISSN: 1543-1940
DOI: https://doi.org/10.1007/s11661-018-5081-6

Springer Professional

Abstract

Please log in to get access to your license.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Other articles of this Issue 3/2019

Effect of Al Addition on the Microstructure and Phase Stability of P91 Ferritic-Martensitic Steel

Effect of Overlapping of Peen Spots on Residual Stresses in Laser-Peened Aluminium Sheets

Investigation on Interface Morphology and Mechanical Properties of Three-Layer Laser Impact Welding of Cu/Al/Cu

Lowering Strain Rate Simultaneously Enhances Carbon- and Hydrogen-Induced Mechanical Degradation in an Fe-33Mn-1.1C Steel

Role of Anisotropic Strength and Stiffness in Governing the Initiation and Propagation of Yielding in Polycrystalline Solids

Scalable Ultrasound-Assisted Casting of Ultra-large 2219 Al Alloy Ingots

Premium Partners