Top

The International Journal of Advanced Manufacturing Technology

Published in:

27-02-2020 | ORIGINAL ARTICLE

Gas-powder laser cladding with slot nozzles

Authors: Ruslan Zhuk, Zhijun Chen, Mykola Anyakin, Jianhua Yao

Published in: The International Journal of Advanced Manufacturing Technology | Issue 4/2020

Activate our intelligent search to find suitable subject content or patents.

search-config

AI-assisted search

Off

Abstract

The topic of this research is the investigation of technological processes of gas-powder laser cladding with the help of high-power diode lasers with rectangular cross-section of laser beam, the mutual influence of technological parameters of gas-powder streams and focused laser beam on the properties of clad layer (dimensions, shape, etc.) in particular. The research stages included the following:

Numerical simulation of gas-powder streams that exit nozzles with different configurations of the inner cavity;
Direct investigation of the influence of technological parameters on the dimensions of clad layer.

It was established that the use of multi-channel gas-powder delivery nozzles significantly influences the productivity and quality of laser processing.

previous article A knowledge-based method for eco-efficiency upgrading of remanufacturing process planning

next article Experimental analysis and characterization of SiC and RE oxides reinforced Al-6063 alloy based hybrid composites

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

inform now

Pinkerton AJ (2015) Advances in the modeling of laser direct metal deposition. J. Laser Appl 27:S15001CrossRef

Zhao C et al (2018) Advances in Laser Cladding on the Surface of Iron Carbon Alloy Matrix. Cailiao Daobao/Materials Review. Cailiao Daobaoshe/ Materials Review.

Ocelík V, de Oliveira U, de Boer M, de Hosson JTM (2007) Thick Co-based coating on cast iron by side laser cladding: Analysis of processing conditions and coating properties. Surface and Coatings Technology 201 (12):5875–5883CrossRef

Kumar A, Roy S (2009) Effect of three-dimensional melt pool convection on process characteristics during laser cladding. Comput Mater Sci 46(2):495–506CrossRef

Fotovvati B, Wayne S F, Lewis G, Asadi E (2018) A review on melt-pool characteristics in laser welding of metals. Adv Mater Sci Eng. 2018:18CrossRef

Wood RF, Giles G.E (1981) Macroscopic theory of pulsed-laser annealing. 1. Thermal transport and melting./R.F.Wood, G.E. Giles. Phys Rev 23:2923–2942CrossRef

Matsunawa A Prosity formation in laser welding – mechanism and suppression methods / Akira Matsunawa, Jong Do Kim, Seiji Katayama//“Proceedings of International Congress “ICALEO’97”, San Diego, USA, Nov. 1997. LIA -1997. - vol 2, p G73-G92

Formation Mechanism of Porosity in Hight Power YAG Laser Welding /Seiji Katayama, Naoky Seto, Masami Mizutani, Akira Matsunawa //“Proceedings of International Congress “ICALEO’2000”,Dearborn, USA, Oct. 2000 , LIA. – 2000.- P.C16-C25

Kovalenko V et al (2016) Development of Multichannel Gas-powder Feeding System Coaxial with Laser Beam. In: Procedia CIRP 42

10.

Vásquez F, Ramos-Grez J A, Walczak M (2012) Multiphysics simulation of laser-Material interaction during laser powder depositon. Int J Adv Manuf Technol 59:1037–1045CrossRef

11.

Weisheit a., et al. (2001) Powder injection: the key to reconditioning and generating components using laser cladding. Proc. Int. Congr. Adv. Mater. Process. 1–8

12.

Xie J, Kar A (2011) Mathematical modeling of melting during laser materials processing Mathematical modeling of melting during laser materials processing. 3015, 3015–3022

13.

Zhang Q et al (2015) Productivity and quality of cladding with a coaxial supply of laser radiation and a gas—powder mixture (Jet). Surf Eng Appl Electrochem 51:339?-346CrossRef

14.

Kovalev O B, Zaitsev AV., Novichenko D, Smurov I (2011) Theoretical and experimental investigation of gas flows, powder transport and heating in coaxial laser direct metal deposition (DMD) process. J Therm Spray Technol 20:465–478CrossRef

15.

Morville S et al (2012) Numerical modeling of powder flow during coaxial direct laser metal deposition – comparison between Ti-6Al-4V alloy and stainless steel 316l direct metal laser deposition (DMLD). 1–10

16.

Balu P, Leggett P, Kovacevic R (2012) Parametric study on a coaxial multi-material powder flow in laser-based powder deposition process. J Mater Process Technol 212:1598– 1610CrossRef

17.

Zekovic S, Dwivedi R, Kovacevic R (2007) Numerical simulation experimental investigation of gas-powder flow from radially symmetrical nozzles in laser-based direct metal deposition. Int J Mach Tools Manuf 47:112–123CrossRef

18.

Kovalenko V et al (2016) Development of multichannel gas-powder feeding system coaxial with laser beam. In: Procedia CIRP 42

19.

U.S Patent Application Publication No. 2012/0199564 A1 (publ, date Aug 9 2012

20.

Pinkerton A J, Li L (2004) Multiple-layer cladding of stainless steel using a high-powered diode laser: An experimental investigation of the process characteristics and material properties. In: Thin Solid Films. https://doi.org/10.1016/j.tsf.2003.11.140

Title: Gas-powder laser cladding with slot nozzles
Authors: Ruslan Zhuk
Zhijun Chen
Mykola Anyakin
Jianhua Yao
Publication date: 27-02-2020
Publisher: Springer London
Published in: The International Journal of Advanced Manufacturing Technology / Issue 4/2020
Print ISSN: 0268-3768
Electronic ISSN: 1433-3015
DOI: https://doi.org/10.1007/s00170-019-04600-6

Springer Professional

Abstract

Please log in to get access to your license.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Other articles of this Issue 4/2020

Dislocation behavior in nickel and iron during laser shock-induced plastic deformation

Experimental study of multi-stable morphing structures actuated by pneumatic actuation

The double-side lapping of SiC wafers with semifixed abrasives and resin–combined plates

Adaptive process control implementation of wire arc additive manufacturing for thin-walled components with overhang features

Time and frequency domain scanning fault diagnosis method based on spectral negentropy and its application

Microstructure homogenization of 2A14 aluminum alloy weld seam by ultrasonic irradiation in metal inert gas welding

Premium Partners