Top

Published in:

01-06-2009

Hold-time effects on elevated-temperature low-cycle-fatigue and crack-propagation behaviors of HAYNES^® 188 superalloy

Authors: S. Y. Lee, Y. L. Lu, P. K. Liaw, L. J. Chen, S. A. Thompson, J. W. Blust, P. F. Browning, A. K. Bhattacharya, J. M. Aurrecoechea, D. L. Klarstrom

Published in: Journal of Materials Science | Issue 11/2009

Activate our intelligent search to find suitable subject content or patents.

search-config

AI-assisted search

Off

Abstract

Low-cycle-fatigue (LCF) and fatigue-crack-growth (FCG) behaviors of a cobalt-based HAYNES 188 superalloy were studied at temperatures ranging from 816 to 982 °C in laboratory air. Various tensile-hold times were imposed at the maximum strain and load in the LCF and FCG tests, respectively, to examine the high-temperature fatigue and creep–fatigue interactions. In this article, the effects of hold time and temperature on the cyclic-stress response, fatigue life, fracture mode, and crack-growth rate are discussed. Parameters based on the tensile-hysteresis energy are applied to correlate the LCF lives with and without hold time.

previous article Improvement of alkali corrosion resistance of mullite ceramics at high temperature by depositing Ca0.3Mg0.2Zr2(PO4)3 coating

next article Influence of martensite morphology on the work-hardening behavior of high strength ferrite–martensite dual-phase steel

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

inform now

Haynes online literature, No. H-3001, Haynes 188 alloy product brochure: https://doi.org/www.haynesintl.com/pdf/h3001.pdf

Merrick HF (1974) Metall Trans 5:891CrossRef

Fournier D, Pineau A (1977) Metall Trans A 8:1095CrossRef

Burke MA, Beck CG (1984) Metall Trans A 15:661CrossRef

Antolovich SD, Liu S, Baur R (1981) Metall Trans A 12:473CrossRef

Bashir S, Taupin P, Antolovich SD (1979) Metall Trans A 10:1481CrossRef

McMahon CJ, Coffin LF (1970) Metall Trans 1:3443

Lerch BA, Jayaraman N, Antolovich SD (1984) Mater Sci Eng 66:151CrossRef

Rao KBS, Schiffers H, Schuster H et al (1988) Metall Trans A 19:359CrossRef

10.

Berling JT, Conway JB (1970) Metall Trans 1:805

11.

Lord DC, Coffin LF (1973) Metall Trans 4:1647CrossRef

12.

Chen W, Wahi RP (1998) In: Proceedings of the 6th Liege conference on materials for advanced power engineering. Belgium, p 1069

13.

Klarstrom DL, Lai GY (1988) In: Superalloys, p 585

14.

Mondel A, Lang KH, Lohe D et al (1997) Mater Sci Eng A 234:715CrossRef

15.

Rao KBS, Castelli MG, Allen GP et al (1997) Metall Mater Trans A 28:347CrossRef

16.

Rao KBS, Castelli MG, Ellis JR (1995) Scripta Mater 33:1005CrossRef

17.

Chen LJ, Liaw PK, He YH et al (2001) Scripta Mater 44:859CrossRef

18.

Lee SY, Lu YL, Liaw PK et al (2009) Mater Sci Eng A 504:64CrossRef

19.

Tawancy HM, Klarstrom DL, Rothman MF (1984) J Metals 36:58

20.

ASTM Standard E647-99: Standard Test Method for Measurement of Fatigue Crack-Growth Rates, 2000 Annual Book of ASTM Standards, vol 03.01, p 591

21.

Johnson HH (1965) Mater Res Stand 5:442

22.

Liaw PK, Leax TR, Williams RS et al (1982) Metall Trans 13:1607CrossRef

23.

Vecchio KS, Fitzpatrick MD, Klarstrom D (1995) Metall Mater Trans A 26:673CrossRef

24.

Chen LJ, Liaw PK, Wang H et al (2004) Mech Mater 36:85CrossRef

25.

Lu YL, Chen LJ, Wang GY et al (2005) Mater Sci Eng A 409:282CrossRef

26.

Lu YL, Chen LJ, Liaw PK et al (2006) Mater Sci Eng A 429:1CrossRef

27.

Lee SY, Lu YL, Liaw PK et al (2008) Mech Time-Depend Mater 12:31CrossRef

28.

Ostergren WJ (1976) J Test Eval 4:327CrossRef

29.

Halford GR (1966) J Mater 1:3

30.

Coffin LF (1954) Trans Am Soc Mech Eng 76:931

Title: Hold-time effects on elevated-temperature low-cycle-fatigue and crack-propagation behaviors of HAYNES® 188 superalloy
Authors: S. Y. Lee
Y. L. Lu
P. K. Liaw
L. J. Chen
S. A. Thompson
J. W. Blust
P. F. Browning
A. K. Bhattacharya
J. M. Aurrecoechea
D. L. Klarstrom
Publication date: 01-06-2009
Publisher: Springer US
Published in: Journal of Materials Science / Issue 11/2009
Print ISSN: 0022-2461
Electronic ISSN: 1573-4803
DOI: https://doi.org/10.1007/s10853-009-3391-1

Springer Professional

Abstract

Please log in to get access to your license.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Other articles of this Issue 11/2009

Synthesis, characterization, and photochromic behaviors of polythiophene derivatives in the solid state

Preparation and investigation of PVDF/PMMA/TiO2 composite film

Capacitive characteristics of Ni–Co oxide nano-composite via coordination homogeneous co-precipitation method

Correlation among sintering process, porosity, and creep deformation of refractory concrete

Single step synthesis of nanosized CeO2–M x O y mixed oxides (M x O y = SiO2, TiO2, ZrO2, and Al2O3) by microwave induced solution combustion synthesis: characterization and CO oxidation

Electrochemical polymerizatıon of hexachloroethane to form poly(hydridocarbyne): a pre-ceramic polymer for diamond production

Premium Partners