Top

Published in:

2022 | OriginalPaper | Chapter

Hygrothermal Aging and Their Influence on Mechanical Properties of the Bio-composites

Author : Hossein Ebrahimnezhad-Khaljiri

Published in: Aging Effects on Natural Fiber-Reinforced Polymer Composites

Publisher: Springer Nature Singapore

Activate our intelligent search to find suitable subject content or patents.

search-config

AI-assisted search

Off

Abstract

In the last decade, the environmental issues and cost productions were the effective factors, which increased the rate of replacing the bio-composites with the conventional composites like glass fibers/epoxy composites in the various applications especially secondary or tertiary applications. The bio-composites should be proper capability for maintaining their initial mechanical properties under the various work environments. One of the harsh work conditions is the environment with the high humidity and temperature, which is introduced as hygrothermal environment. Being in this environment under the various dynamic and static loading can age the bio-composites. The hygrothermal aging can influence on the mechanical performance of bio-composites, which can increase or reduce the mechanical properties of those. Characterizing and recognizing the effective factors under the hygrothermal aging can help to the producer or researchers to fabricate the proper bio-composites for using in the hygrothermal conditions. The aim of this chapter is to introduce some of the recognized mechanisms under hygrothermal aging and the effect of them on the mechanical properties of various bio-composites.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

inform now

previous chapter Degradation Effects of Completely Biodegradable Composites to Moisture Absorption and Water Aging

next chapter Effects of Natural Weathering on Aesthetics, Thermal and Mechanical Properties of the Bio-composites

Ahmad MR, Chen B, Haque MA, Shah SFA (2020) Utilization of industrial and hazardous waste materials to formulate energy-efficient hygrothermal bio-composites. J Clean Prod 250. https://doi.org/10.1016/j.jclepro.2019.119469

Akampumuza O, Wambua PM, Ahmed A et al (2017) Review of the applications of biocomposites in the automotive Industry. Polym Compos 38:2553–2569. https://doi.org/10.1002/pc.23847

Alam P, Robert C, Brádaigh Ó, CM, (2018) Tidal turbine blade composites—a review on the effects of hygrothermal aging on the properties of CFRP. Compos Part B Eng 149:248–259. https://doi.org/10.1016/j.compositesb.2018.05.003CrossRef

Aouat T, Kaci M, Lopez-Cuesta JM, Devaux E (2019) Investigation on the durability of PLA bionanocomposite fibers under hygrothermal conditions. Front Mater 6:323. https://doi.org/10.3389/fmats.2019.00323CrossRef

Azwa ZN, Yousif BF (2019) Physical and mechanical properties of bamboo fibre/polyester composites subjected to moisture and hygrothermal conditions. Proc Inst Mech Eng Part L J Mater Des Appl 233:1065–1079. https://doi.org/10.1177/1464420717704221CrossRef

Bigdilou B, M, Eslami-Farsani R, Ebrahimnezhad-Khaljiri H, Mohammadi MA, (2020) Experimental assessment of adding carbon nanotubes on the impact properties of Kevlar-ultrahigh molecular weight polyethylene fibers hybrid composites. J Ind Text. https://doi.org/10.1177/1528083720921483CrossRef

Battegazzore D, Alongi J, Duraccio D, Frache A (2018) All natural high-density fiber- and particleboards from hemp fibers or rice husk particles. J Polym Environ 26:1652–1660. https://doi.org/10.1007/s10924-017-1071-9CrossRef

Beg MDH, Pickering KL (2008a) Reprocessing of wood fibre reinforced polypropylene composites. Part II: Hygrothermal ageing and its effects. Compos Part A Appl Sci Manuf 39:1565–1571. https://doi.org/10.1016/j.compositesa.2008.06.002CrossRef

Beg MDH, Pickering KL (2008b) Mechanical performance of Kraft fibre reinforced polypropylene composites: Influence of fibre length, fibre beating and hygrothermal ageing. Compos Part A Appl Sci Manuf 39:1748–1755. https://doi.org/10.1016/j.compositesa.2008.08.003CrossRef

Belotti LP, Vadivel HS, Emami N (2019) Tribological performance of hygrothermally aged UHMWPE hybrid composites. Tribol Int 138:150–156. https://doi.org/10.1016/j.triboint.2019.05.034CrossRef

Bhagavathi LR, Deshpande AP, Janaki Ram GD, Panigrahi SK (2021) Hygrothermal aging, fatigue and dynamic mechanical behavior of cellulosic particles reinforced one-component moisture curable polyurethane adhesive joints. Int J Adhes Adhes 105. https://doi.org/10.1016/j.ijadhadh.2020.102771

Cadu T, Van Schoors L, Sicot O et al (2019) Cyclic hygrothermal ageing of flax fibers’ bundles and unidirectional flax/epoxy composite. Are bio-based reinforced composites so sensitive? Ind Crops Prod 141:111730. https://doi.org/10.1016/j.indcrop.2019.111730

Chavhan GR, Wankhade LN (2020) Improvement of the mechanical properties of hybrid composites prepared by fibers, fiber-metals, and nano-filler particles—a review. Mater Today Proc 27:72–82. https://doi.org/10.1016/j.matpr.2019.08.240CrossRef

Cheng M, Zhong Y, Kureemun U et al (2020) Environmental durability of carbon/flax fiber hybrid composites. Compos Struct 234. https://doi.org/10.1016/j.compstruct.2019.111719

Chunhong W, Shengkai L, Zhanglong Y (2016) Mechanical, hygrothermal ageing and moisture absorption properties of bamboo fibers reinforced with polypropylene composites. J Reinf Plast Compos 35:1062–1074. https://doi.org/10.1177/0731684416637681CrossRef

Cuinat-Guerraz N, Dumont MJ, Hubert P (2016) Environmental resistance of flax/bio-based epoxy and flax/polyurethane composites manufactured by resin transfer moulding. Compos Part A Appl Sci Manuf 88:140–147. https://doi.org/10.1016/j.compositesa.2016.05.018CrossRef

Del Saz-Orozco B, Alonso MV, Oliet M et al (2015) Lignin particle- and wood flour-reinforced phenolic foams: Friability, thermal stability and effect of hygrothermal aging on mechanical properties and morphology. Compos Part B Eng 80:154–161. https://doi.org/10.1016/j.compositesb.2015.05.043CrossRef

Desai AA, Basbagill J, Nutt SR, Alonso MV (2010) Diffusivity and climatic simulation of hybrid foams. J Cell Plast 46:461–478. https://doi.org/10.1177/0021955X10373641CrossRef

Ebrahimnezhad-Khaljiri H, Eslami-Farsani R, Akbarzadeh E (2020a) Effect of interlayer hybridization of carbon, Kevlar, and glass fibers with oxidized polyacrylonitrile fibers on the mechanical behaviors of hybrid composites. Proc Inst Mech Eng Part C J Mech Eng Sci 234:1823–1835. https://doi.org/10.1177/0954406219897935CrossRef

Ebrahimnezhad-Khaljiri H, Eslami-Farsani R, Talebi S (2020b) Investigating the high velocity impact behavior of the laminated composites of aluminum/jute fibers-epoxy containing nanoclay particles. Fibers Polym 21:2607–2613. https://doi.org/10.1007/s12221-020-1209-6CrossRef

Fiore V, Scalici T, Badagliacco D et al (2017) Aging resistance of bio-epoxy jute-basalt hybrid composites as novel multilayer structures for cladding. Compos Struct 160:1319–1328. https://doi.org/10.1016/j.compstruct.2016.11.025CrossRef

Hu RH, Sun M, young, Lim JK, (2010) Moisture absorption, tensile strength and microstructure evolution of short jute fiber/polylactide composite in hygrothermal environment. Mater Des 31:3167–3173. https://doi.org/10.1016/j.matdes.2010.02.030CrossRef

Huang JK, Bin YW (2019) The mechanical, hygral, and interfacial strength of continuous bamboo fiber reinforced epoxy composites. Compos Part B Eng 166:272–283. https://doi.org/10.1016/j.compositesb.2018.12.013CrossRef

Hussain A, Calabria-Holley J, Lawrence M, Jiang Y (2019) Hygrothermal and mechanical characterisation of novel hemp shiv based thermal insulation composites. Constr Build Mater 212:561–568. https://doi.org/10.1016/j.conbuildmat.2019.04.029CrossRef

Islam MS, Pickering KL, Foreman NJ (2010) Influence of hygrothermal ageing on the physico-mechanical properties of alkali treated industrial hemp fibre reinforced polylactic acid composites. J Polym Environ 18:696–704. https://doi.org/10.1007/s10924-010-0225-9CrossRef

Jiang N, Yu T, Li Y et al (2019) Hygrothermal aging and structural damage of a jute/poly (lactic acid) (PLA) composite observed by X-ray tomography. Compos Sci Technol 173:15–23. https://doi.org/10.1016/j.compscitech.2019.01.018CrossRef

Jin P, Wang D, Tan X (2012) Review of hygrothermal effects on carbon fiber-reinforced composite materials. Adv Mater Res 490–495:3611–3615. https://doi.org/10.4028/www.scientific.net/AMR.490-495.3611CrossRef

Kamau-Devers K, Kortum Z, Miller SA (2019) Hydrothermal aging of bio-based poly(lactic acid) (PLA) wood polymer composites: studies on sorption behavior, morphology, and heat conductance. Constr Build Mater 214:290–302. https://doi.org/10.1016/j.conbuildmat.2019.04.098CrossRef

Li Y, Xue B (2016) Hydrothermal ageing mechanisms of unidirectional flax fabric reinforced epoxy composites. Polym Degrad Stab 126:144–158. https://doi.org/10.1016/j.polymdegradstab.2016.02.004CrossRef

Malmstein M, Chambers AR, Blake JIR (2013) Hygrothermal ageing of plant oil based marine composites. Compos Struct 101:138–143. https://doi.org/10.1016/j.compstruct.2013.02.003CrossRef

Mejri M, Toubal L, Cuillière JC, François V (2018) Hygrothermal aging effects on mechanical and fatigue behaviors of a short-natural-fiber-reinforced composite. Int J Fatigue 108:96–108. https://doi.org/10.1016/j.ijfatigue.2017.11.004CrossRef

Mohd Ishak ZA, Yow BN, NG BL et al (2001) Hygrothermal aging and tensile behavior of injection-molded rice husk-filled polypropylene composites. J Appl Polym Sci 81:742–753. https://doi.org/10.1002/app.1491CrossRef

Mokhothu TH, John MJ (2015) Review on hygroscopic aging of cellulose fibres and their biocomposites. Carbohydr Polym 131:337–354. https://doi.org/10.1016/j.carbpol.2015.06.027CrossRef

Mosiewicki MA, Aranguren MI (2013) A short review on novel biocomposites based on plant oil precursors. Eur Polym J 49:1243–1256. https://doi.org/10.1016/j.eurpolymj.2013.02.034CrossRef

Paxton NC, Allenby MC, Lewis PM, Woodruff MA (2019) Biomedical applications of polyethylene. Eur Polym J 118:412–428. https://doi.org/10.1016/j.eurpolymj.2019.05.037CrossRef

Retegi A, Arbelaiz A, Alvarez P et al (2006) Effects of hygrothermal ageing on mechanical properties of flax pulps and their polypropylene matrix composites. J Appl Polym Sci 102:3438–3445. https://doi.org/10.1002/app.24331CrossRef

Salem A, Bensalah W, Mezlini S (2021) Effect of hygrothermal aging on the tribological behavior of HDPE composites for bio-implant application. Polym Test 94. https://doi.org/10.1016/j.polymertesting.2020.107050

Sanjay MR, Madhu P, Jawaid M et al (2018) Characterization and properties of natural fiber polymer composites: A comprehensive review. J Cleaner Prod 172:566–581. https://doi.org/10.1016/j.jclepro.2017.10.101CrossRef

Scida D, Assarar M, Poilâne C, Ayad R (2013) Influence of hygrothermal ageing on the damage mechanisms of flax-fibre reinforced epoxy composite. Compos Part B Eng 48:51–58. https://doi.org/10.1016/j.compositesb.2012.12.010CrossRef

Sit M, Ray C (2019) Free vibration characteristics of glass and bamboo epoxy laminates under hygrothermal effect: a comparative approach. Compos Part B Eng 176. https://doi.org/10.1016/j.compositesb.2019.107333

Sodoke FK, Toubal L, Laperrière L (2016) Hygrothermal effects on fatigue behavior of quasi-isotropic flax/epoxy composites using principal component analysis. J Mater Sci 51:10793–10805. https://doi.org/10.1007/s10853-016-0291-zCrossRef

Tham WL, Ishak ZAM, Chow WS (2014) Water absorption and hygrothermal aging behaviors of SEBS-g-MAH toughened poly(lactic acid)/halloysite nanocomposites. Polym Plast Technol Eng 53:472–480. https://doi.org/10.1080/03602559.2013.845208CrossRef

Thygesen A, Thomsen AB, Daniel G, Lilholt H (2007) Comparison of composites made from fungal defibrated hemp with composites of traditional hemp yarn. Ind Crops Prod 25:147–159. https://doi.org/10.1016/j.indcrop.2006.08.002CrossRef

Tserpes K, Tzatzadakis V, Katsiropoulos C (2019) Effect of hygrothermal ageing on the interlaminar shear strength of carbon fiber-reinforced rosin-based epoxy bio-composites. Compos Struct 226. https://doi.org/10.1016/j.compstruct.2019.111211

Wang X, Petrů M (2019) Effect of hygrothermal aging and surface treatment on the dynamic mechanical behavior of flax fiber reinforced composites. Materials (basel) 12:2376. https://doi.org/10.3390/ma12152376CrossRef

Wang A, Xian G, Li H (2019a) Effects of fiber surface grafting with nano-clay on the hydrothermal ageing behaviors of flax fiber/epoxy composite plates. Polymers (basel) 11:1278. https://doi.org/10.3390/polym11081278CrossRef

Wang X, Petrů M, Yu H (2019b) The effect of surface treatment on the creep behavior of flax fiber reinforced composites under hygrothermal aging conditions. Constr Build Mater 208:220–227. https://doi.org/10.1016/j.conbuildmat.2019.03.001CrossRef

Wang A, Wang X, Xian G (2020a) Mechanical, low-velocity impact, and hydrothermal aging properties of flax/carbon hybrid composite plates. Polym Test 90. https://doi.org/10.1016/j.polymertesting.2020.106759

Wang W, Guo X, Zhao D et al (2020b) Water absorption and hygrothermal aging behavior of wood-polypropylene composites. Polymers (basel) 12:782. https://doi.org/10.3390/POLYM12040782CrossRef

Xu C, Xing C, Pan Hl (2015) Hygrothermal aging properties of wood plastic composites made of recycled high density polypropylene as affected by Inorganic pigments. Polym Eng Sci 55:2127–2132. https://doi.org/10.1002/pen.24054CrossRef

Yu T, Sun F, Lu M, Li Y (2018) Water absorption and hygrothermal aging behavior of short ramie fiber reinforced poly(lactic acid) composites. Polym Compos 39:1098–1104. https://doi.org/10.1002/pc.24038CrossRef

Zhou H, Wang G, Chen L et al (2019) Hydrothermal aging properties of three typical bamboo engineering composites. Materials (basel) 12:1450. https://doi.org/10.3390/ma12091450CrossRef

Title: Hygrothermal Aging and Their Influence on Mechanical Properties of the Bio-composites
Author: Hossein Ebrahimnezhad-Khaljiri
Publisher: Springer Nature Singapore
Book: Aging Effects on Natural Fiber-Reinforced Polymer Composites
Print ISBN: 978-981-16-8359-6

Electronic ISBN: 978-981-16-8360-2

Copyright Year: 2022
DOI: https://doi.org/10.1007/978-981-16-8360-2_7

Springer Professional

Abstract

Please log in to get access to your license.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Premium Partners