Skip to main content
Top
Published in: Metallurgical and Materials Transactions A 5/2012

01-05-2012 | Symposium: Neutron and X-Ray Studies of Advanced Materials IV

In Situ Neutron-Diffraction Studies on the Creep Behavior of a Ferritic Superalloy

Authors: Shenyan Huang, Donald W. Brown, Bjørn Clausen, Zhenke Teng, Yanfei Gao, Peter K. Liaw

Published in: Metallurgical and Materials Transactions A | Issue 5/2012

Log in

Activate our intelligent search to find suitable subject content or patents.

search-config
loading …

Abstract

Precipitate strengthening effects toward the improved creep behavior have been investigated in a ferritic superalloy with B2-type (Ni,Fe)Al precipitates. In situ neutron diffraction has been employed to study the evolution of the average phase strains, (hkl) plane-specific lattice strains, interphase lattice misfit, and grain-orientation texture during creep deformation of the ferritic superalloy at 973 K (700 °C). The creep mechanisms and particle-dislocation interactions have been studied from the macroscopic creep behavior. At a low stress level of 107 MPa, the dislocation-climb-controlled power-law creep is dominant in the matrix phase, and the load partition between the matrix and the precipitate phases remains constant. However, intergranular stresses develop progressively during the primary creep regime with the load transferred to 200 and 310 oriented grains along the axial loading direction. At a high stress level of 150 MPa, deformation is governed by the thermally activated dislocation glide (power-law breakdown) accompanied by the accelerated texture evolution. Furthermore, an increase in stress level also leads to load transfer from the plastically deformed matrix to the elastically deformed precipitates in the axial direction, along with an increase in the lattice misfit between the matrix and the precipitate phases.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

  • über 102.000 Bücher
  • über 537 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Finance + Banking
  • Management + Führung
  • Marketing + Vertrieb
  • Maschinenbau + Werkstoffe
  • Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

  • über 67.000 Bücher
  • über 390 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Maschinenbau + Werkstoffe




 

Jetzt Wissensvorsprung sichern!

Literature
1.
go back to reference C. Stallybrass and G. Sauthoff: Mater. Sci. Eng. A, 2004, vol. 387, pp. 985-90.CrossRef C. Stallybrass and G. Sauthoff: Mater. Sci. Eng. A, 2004, vol. 387, pp. 985-90.CrossRef
2.
go back to reference C. Stallybrass, A. Schneider, and G. Sauthoff: Intermetallics, 2005, vol. 13, pp. 1263-68.CrossRef C. Stallybrass, A. Schneider, and G. Sauthoff: Intermetallics, 2005, vol. 13, pp. 1263-68.CrossRef
3.
go back to reference Z.K. Teng, C.T. Liu, G. Ghosh, P.K. Liaw, and M.E. Fine: Intermetallics, 2010, vol. 18, pp. 1437-43.CrossRef Z.K. Teng, C.T. Liu, G. Ghosh, P.K. Liaw, and M.E. Fine: Intermetallics, 2010, vol. 18, pp. 1437-43.CrossRef
4.
go back to reference Z.K. Teng, M.K. Miller, G. Ghosh, C.T. Liu, S. Huang, K.F. Russell, M.E. Fine, and P. K. Liaw: Scripta Mater., 2010, vol. 63, pp. 61-64.CrossRef Z.K. Teng, M.K. Miller, G. Ghosh, C.T. Liu, S. Huang, K.F. Russell, M.E. Fine, and P. K. Liaw: Scripta Mater., 2010, vol. 63, pp. 61-64.CrossRef
5.
go back to reference S.M. Zhu, S.C. Tjong, and J.K.L. Lai: Acta Mater., 1998, vol. 46, pp. 2969-76.CrossRef S.M. Zhu, S.C. Tjong, and J.K.L. Lai: Acta Mater., 1998, vol. 46, pp. 2969-76.CrossRef
7.
go back to reference M.B. Ruggles, S. Cheng, and E. Krempl: Mater. Sci. Eng. A-Struct. Mater. Prop. Microstruct. Process., 1994, vol. 186, pp. 15-21.CrossRef M.B. Ruggles, S. Cheng, and E. Krempl: Mater. Sci. Eng. A-Struct. Mater. Prop. Microstruct. Process., 1994, vol. 186, pp. 15-21.CrossRef
8.
go back to reference H. Magnusson and R. Sandstrom: Mater. Sci. Eng. A-Struct. Mater. Prop. Microstruct. Process., 2009, vol. 527, pp. 118-25.CrossRef H. Magnusson and R. Sandstrom: Mater. Sci. Eng. A-Struct. Mater. Prop. Microstruct. Process., 2009, vol. 527, pp. 118-25.CrossRef
10.
go back to reference M.R. Daymond, M. Preuss, and B. Clausen: Acta Mater., 2007, vol. 55, pp. 3089-3102.CrossRef M.R. Daymond, M. Preuss, and B. Clausen: Acta Mater., 2007, vol. 55, pp. 3089-3102.CrossRef
11.
go back to reference S. Ma, V. Seetharaman, and B.S. Majumdar: Acta Mater., 2008, vol. 56, pp. 4102-13.CrossRef S. Ma, V. Seetharaman, and B.S. Majumdar: Acta Mater., 2008, vol. 56, pp. 4102-13.CrossRef
12.
go back to reference S. Ma, D. Brown, M.A.M. Bourke, M.R. Daymond, and B.S. Majurndar: Mater. Sci. Eng. A-Struct. Mater. Prop. Microstruct. Process., 2005, vol. 399, pp. 141-53.CrossRef S. Ma, D. Brown, M.A.M. Bourke, M.R. Daymond, and B.S. Majurndar: Mater. Sci. Eng. A-Struct. Mater. Prop. Microstruct. Process., 2005, vol. 399, pp. 141-53.CrossRef
13.
14.
go back to reference A.C. Larson and R.B. Von Dreele: GSAS-General Structure Analysis System, p. 143. A.C. Larson and R.B. Von Dreele: GSAS-General Structure Analysis System, p. 143.
15.
go back to reference M.R. Daymond, M.A.M. Bourke, R.B. VonDreele, B. Clausen, and T. Lorentzen: J. Appl. Phys., 1997, vol. 82, pp. 1554-62.CrossRef M.R. Daymond, M.A.M. Bourke, R.B. VonDreele, B. Clausen, and T. Lorentzen: J. Appl. Phys., 1997, vol. 82, pp. 1554-62.CrossRef
16.
go back to reference H.J. Stone, T.M. Holden, and R.C. Reed: Acta Mater., 1999, vol. 47, pp. 4435-48.CrossRef H.J. Stone, T.M. Holden, and R.C. Reed: Acta Mater., 1999, vol. 47, pp. 4435-48.CrossRef
17.
18.
19.
go back to reference H.M.A. Winand, A.F. Whitehouse, and P.J. Withers: Mater. Sci. Eng. A-Struct. Mater. Prop. Microstruct. Process., 2000, vol. 284, pp. 103-13.CrossRef H.M.A. Winand, A.F. Whitehouse, and P.J. Withers: Mater. Sci. Eng. A-Struct. Mater. Prop. Microstruct. Process., 2000, vol. 284, pp. 103-13.CrossRef
20.
go back to reference W. Gale and T. Totemeier: Smithells Metals Reference Book, 8th ed., Elsevier, Atlanta, GA, 2004. W. Gale and T. Totemeier: Smithells Metals Reference Book, 8th ed., Elsevier, Atlanta, GA, 2004.
21.
22.
go back to reference H.A. Calderon, M.E. Fine, and J.R. Weertman: Metall. Trans. A, 1988, vol. 19A, pp. 1135-46. H.A. Calderon, M.E. Fine, and J.R. Weertman: Metall. Trans. A, 1988, vol. 19A, pp. 1135-46.
23.
go back to reference R. Taillard, A. Pineau, and B.J. Thomas: Mater. Sci. Eng., 1982, vol. 54, pp. 209-19.CrossRef R. Taillard, A. Pineau, and B.J. Thomas: Mater. Sci. Eng., 1982, vol. 54, pp. 209-19.CrossRef
24.
go back to reference H. Choo, D. Seo, J. Beddoes, M.A.M. Bourke, and D.W. Brown: Appl. Phys. Lett., 2004, vol. 85, pp. 4654-56.CrossRef H. Choo, D. Seo, J. Beddoes, M.A.M. Bourke, and D.W. Brown: Appl. Phys. Lett., 2004, vol. 85, pp. 4654-56.CrossRef
25.
26.
go back to reference E.C. Oliver, M.R. Daymond, and P. J. Withers: Acta Mater., 2004, vol. 52, pp. 1937-51.CrossRef E.C. Oliver, M.R. Daymond, and P. J. Withers: Acta Mater., 2004, vol. 52, pp. 1937-51.CrossRef
27.
go back to reference Y. Tomota, P. Lukas, S. Harjo, J.H. Park, N. Tsuchida, and D. Neov: Acta Mater., 2003, vol. 51, pp. 819-30.CrossRef Y. Tomota, P. Lukas, S. Harjo, J.H. Park, N. Tsuchida, and D. Neov: Acta Mater., 2003, vol. 51, pp. 819-30.CrossRef
28.
go back to reference M.T. Hutchings, P.J. Withers, T.M. Holden, and T. Lorentzen: Introduction to the Characterization of Residual Stress by Neutron Diffraction, 1st ed., CRC Press, Boca Raton, FL, 2005, p. 161. M.T. Hutchings, P.J. Withers, T.M. Holden, and T. Lorentzen: Introduction to the Characterization of Residual Stress by Neutron Diffraction, 1st ed., CRC Press, Boca Raton, FL, 2005, p. 161.
29.
go back to reference S.J. Lewis and C.E. Truman: J. Phys. D-Appl. Phys., 2010, vol. 43, p. 265501.CrossRef S.J. Lewis and C.E. Truman: J. Phys. D-Appl. Phys., 2010, vol. 43, p. 265501.CrossRef
30.
go back to reference O. Engler and V. Randle: Introduction to Texture Analysis: Macrotexture, Microtexture, and Orientation Mapping, 2nd ed., CRC Press, Boca Raton, FL, p. 153. O. Engler and V. Randle: Introduction to Texture Analysis: Macrotexture, Microtexture, and Orientation Mapping, 2nd ed., CRC Press, Boca Raton, FL, p. 153.
31.
go back to reference W.F. Hosford: The Mechanics of Crystals and Textured Polycrystals, 20th ed., Oxford University Press, New York, NY, pp. 36–42. W.F. Hosford: The Mechanics of Crystals and Textured Polycrystals, 20th ed., Oxford University Press, New York, NY, pp. 36–42.
32.
go back to reference H.J. Frost and M.F. Ashby: Deformation Mechanism Maps: the Plasticity and Creep of Metals and Ceramics, Pergamon Press, Oxford, UK, 1982. H.J. Frost and M.F. Ashby: Deformation Mechanism Maps: the Plasticity and Creep of Metals and Ceramics, Pergamon Press, Oxford, UK, 1982.
33.
go back to reference A.S. Argon: Physical Metallurgy, Eds. Robert W. Cahn and Peter Haasen, 4th ed., Elsevier, Atlanta, GA, p. 1999. A.S. Argon: Physical Metallurgy, Eds. Robert W. Cahn and Peter Haasen, 4th ed., Elsevier, Atlanta, GA, p. 1999.
35.
go back to reference F. Groisbock and R. Ebner: Z. Metallk., 1991, vol. 82, pp. 435-41. F. Groisbock and R. Ebner: Z. Metallk., 1991, vol. 82, pp. 435-41.
36.
go back to reference J.W. Martin: Micromechanisms in Particle-Hardened Alloys, Cambridge University Press, Cambridge, UK, p. 43. J.W. Martin: Micromechanisms in Particle-Hardened Alloys, Cambridge University Press, Cambridge, UK, p. 43.
37.
go back to reference M.E. Kassner: Fundamentals of Creep in Metals and Alloys, 1st ed., Elsevier, Atlanta, GA, pp. 151–69. M.E. Kassner: Fundamentals of Creep in Metals and Alloys, 1st ed., Elsevier, Atlanta, GA, pp. 151–69.
38.
go back to reference A.J. Allen, M.A.M. Bourke, S. Dawes, M.T. Hutchings, and P.J. Withers: Acta Metall. Mater., 1992, vol. 40, pp. 2361-73.CrossRef A.J. Allen, M.A.M. Bourke, S. Dawes, M.T. Hutchings, and P.J. Withers: Acta Metall. Mater., 1992, vol. 40, pp. 2361-73.CrossRef
Metadata
Title
In Situ Neutron-Diffraction Studies on the Creep Behavior of a Ferritic Superalloy
Authors
Shenyan Huang
Donald W. Brown
Bjørn Clausen
Zhenke Teng
Yanfei Gao
Peter K. Liaw
Publication date
01-05-2012
Publisher
Springer US
Published in
Metallurgical and Materials Transactions A / Issue 5/2012
Print ISSN: 1073-5623
Electronic ISSN: 1543-1940
DOI
https://doi.org/10.1007/s11661-011-0979-2

Other articles of this Issue 5/2012

Metallurgical and Materials Transactions A 5/2012 Go to the issue

Symposium: Neutron and X-Ray Studies of Advanced Materials IV

Temperature Dependence of Diffuse Scattering in PZN

Premium Partners