Top

Metallurgical and Materials Transactions A

Published in:

01-01-2014

In-Situ Synchrotron Diffraction Studies on Transformation Strain Development in a High Strength Quenched and Tempered Structural Steel—Part I. Bainitic Transformation

Authors: R. K. Dutta, R. M. Huizenga, M. Amirthalingam, A. King, H. Gao, M. J. M. Hermans, J. Sietsma, I. M. Richardson

Published in: Metallurgical and Materials Transactions A | Issue 1/2014

Activate our intelligent search to find suitable subject content or patents.

search-config

AI-assisted search

Off

Abstract

In-situ phase transformation behavior of a high strength (830 MPa yield stress) quenched and tempered S690QL1 (Fe-0.16C-0.2Si-0.87Mn-0.33Cr-0.21Mo (wt pct)) structural steel during continuous cooling under different mechanical loading conditions has been studied. Time-temperature-load resolved 2D synchrotron diffraction patterns were recorded and used to calculate the phase fractions and lattice parameters of the phases during heating and cooling cycles under different loading conditions. In addition to the thermal expansion behavior, the effects of the applied stress on the elastic strains during the formation of bainite from austenite and the effect of carbon on the lattice parameter of bainitic ferrite were calculated. The results show that small tensile stresses applied at the transformation temperature do not change the kinetics of the phase transformation. The start temperature for the bainitic transformation decreases upon increasing the applied tensile stress. The elastic strains increase with increase in the applied tensile stress.

previous article Study of Metallic Carbide (MC) in a Ni-Co-Cr-Based Powder Metallurgy Superalloy

next article In-Situ Synchrotron Diffraction Studies on Transformation Strain Development in a High-Strength Quenched and Tempered Structural Steel—Part II. Martensitic Transformation

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

inform now

NEN-EN 10025-6, Technical report November, 2004.

Blond R, Jimenez-Melero E, Zhao L,Wright JP, Brck E, van der Zwaag S, van Dijk NH (2012) Acta Materialia 60(2):565–577CrossRef

Blond R, Jimenez-Melero E, van Dijk NH, Brck E, Zhao L, Sietsma J, van der Zwaag S (2011) Diffusion and Defect Data PtB: Solid State Phenomena 172(174):196–201

Offerman SE, van Dijk NH, Sietsma J, Lauridsen EM, Margulies L, Grigull S, Poulsen HF, van der Zwaag S (2006) Nuclear Instruments and Methods in Physics Research, Section B: Beam Interactions with Materials and Atoms 246(1):194–200CrossRef

Offerman SE, van Dijk NH, Sietsma J, Grigull S, Lauridsen EM, Margulies L, Poulsen HF, Rekveldt MT, van der Zwaag S (2002) Science 298(5595):1003–1005CrossRef

Dai H, Francis JA, Stone HJ, Bhadeshia HKDH, Withers PJ (2008) Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science 39(13):3070–3078CrossRef

Stone HJ, Bhadeshia HKDH, Withers PJ (2008) Materials Science Forum 571(572):393–398CrossRef

Taleb L, Cavallo N, Waeckel F (2001) International Journal of Plasticity 17:1–20CrossRef

Bhadeshia HKDH (2004) Materials Science and Engineering A 378(1-2 SPEC ISS.):34–39CrossRef

10.

Withers PJ, Bhadeshia HKDH (2001). Materials Science and Technology 17(4):366–375CrossRef

11.

Dutta RK, Amirthalingam M, Hermans MJM, Richardson IM (2013) Materials Science and Engineering A 559:86–95CrossRef

12.

Dutta RK, Huizenga RM, Amirthalingam M, Hermans MJM, King A, Richardson IM (2013) Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science 44(9):4011–4014CrossRef

13.

J.C. Labiche, O. Mathon, S. Pascarelli, M.A. Newton, G.G. Ferre, C. Curfs, G. Vaughan, A. Homs, and D.F. Carreiras: Rev. Sci. Instrum., 2007, vol. 78 (9), p. 091301.

14.

Hammersley AP, Svensson SO, Hanfland M, Fitch AN, Husermann D (1996) High Pressure Research 14(4-5):235–248CrossRef

15.

van Dijk NH, Butt AM, Zhao L, Sietsma J, Offerman SE, Wright JP, van der Zwaag S (2005) Acta Materialia 53(20):5439–5447CrossRef

16.

van Bohemen SMC, Sietsma J (2008) International Journal of Materials Research 99(7):739–747CrossRef

17.

van Bohemen SMC (2010) Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science 41(2):285–296CrossRef

18.

Pati SR, Cohen M (1969) . Acta. Metall.. Mater.. 17(3):189–199CrossRef

19.

van Bohemen SMC, Sietsma J (2010) Materials Science and Engineering A 527(24-25):6672–6676CrossRef

20.

Chester NA, Bhadeshia HKDH (1997) J Phys IV 7:41–46

21.

van Bohemen SMC, Sietsma J (2009) Materials Science and Technology 25(8):1009–1012CrossRef

22.

Bhadeshia HKDH (1981) Metal Science 15(4):175–177CrossRef

23.

H.K.D.H. Bhadeshia: Bainite in Steels, 2^nd ed., The Institute of Materials, London, 2001.

24.

Koistinen DP, Marburger RE (1959) Acta Metallurgica 7(1):59–60CrossRef

25.

Babu SS, Specht ED, David SA, Karapetrova E, Zschack P, Peet M, Bhadeshia HKDH (2005) Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science 36(12):3281–3289CrossRef

26.

Dyson DJ, Holmes B (1970) J Iron Steel Inst (London) 208(pt 5):469–74

27.

Bhadeshia HKDH, David SA, Vitek JM, Reed RW (1991) Materials Science and Technology 7(8):686–698CrossRef

28.

M. Amirthalingam, M.J.M. Hermans, R.M. Huizenga, S.E. Offerman, J. Sietsma, and I.M. Richardson: in In-Situ Studies with Photons, Neutrons and Electrons Scattering, T. Kannengiesser, S.S. Babu, Y. Komizo, A.J. Ramirez, eds., Springer, Berlin. ISBN 978-3-642-14793-7, 2010, pp. 133–48

29.

Amirthalingam M, Hermans MJM, Zhao L, Richardson IM (2010) Metallurgical and Materials Transactions A 41:431–439CrossRef

30.

Barabash OM, Babu SS, David SA, Vitek JM, Barabash RI (2003) Journal of Applied Physics 94(1):738–742CrossRef

31.

de Cooman BC (2004) Current Opinion in Solid State and Materials Science 8(34):285–303CrossRef

32.

Wang J, van der Zwaag S (2001) Metallurgical and Materials Transactions A 32:1527–1539CrossRef

33.

Rees GI, Bhadeshia HKDH (1992) . Materials Science and Technology 8(11):985–993CrossRef

34.

N. Luzginova: Ph.D. Thesis, Delft University of Technology, 2008.

35.

Coret M, Calloch S, Combescure A (2002) International Journal of Plasticity 18:1707–1727CrossRef

36.

Gautier E, Denis S, Liebaut C, Sjostrom S (1994) Journal De Physique IV : JP 4(3):279–284

Title: In-Situ Synchrotron Diffraction Studies on Transformation Strain Development in a High Strength Quenched and Tempered Structural Steel—Part I. Bainitic Transformation
Authors: R. K. Dutta
R. M. Huizenga
M. Amirthalingam
A. King
H. Gao
M. J. M. Hermans
J. Sietsma
I. M. Richardson
Publication date: 01-01-2014
Publisher: Springer US
Published in: Metallurgical and Materials Transactions A / Issue 1/2014
Print ISSN: 1073-5623
Electronic ISSN: 1543-1940
DOI: https://doi.org/10.1007/s11661-013-1992-4

Springer Professional

Abstract

Please log in to get access to your license.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Other articles of this Issue 1/2014

Microstructure and Tribological Properties of AlCoCrFeNiTi0.5 High-Entropy Alloy in Hydrogen Peroxide Solution

Foreword

Study of Metallic Carbide (MC) in a Ni-Co-Cr-Based Powder Metallurgy Superalloy

Microstructure Formation and Mechanical Properties of AZ31 Magnesium Alloy Solidified with a Novel Mechanical Vibration Technique

Influence of Strain Rate and Temperature on Tensile Deformation and Fracture Behavior of Type 316L(N) Austenitic Stainless Steel

Fatigue Characterization of Fluorogold and Fluorogreen Polymers

Premium Partners