Top

Published in:

2023 | OriginalPaper | Chapter

Influence of Dressing Parameters on Surface Roughness and Wheel Life in Internal Grinding SKD11 Tool Steel

Authors : Tran Huu Danh, Nguyen Hong Linh, Bui Thanh Danh, Nguyen Anh Tuan, Nguyen Thi Quoc Dung, Hoang Xuan Tu, Le Xuan Hung

Published in: Advances in Engineering Research and Application

Publisher: Springer International Publishing

Activate our intelligent search to find suitable subject content or patents.

search-config

AI-assisted search

Off

Abstract

This paper presents a multi-objective study on internal grinding to achieve minimum surface roughness (SR) and maximum wheel life (WL) at the same time. This study looked at six input parameters: coarse dressing depth a_r, coarse dressing time n_r, fine dressing depth a_f, fine dressing time n_f, non-feeding dressing n₀, and dressing feed rate S_d. The effect of these parameters on the SR and WL of the grinding process was investigated. Furthermore, optimal input parameters to achieve SR and WL at the same time were proposed. It was also reported that the optimal set of input dressing parameters was appropriate for use.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

inform now

previous chapter Improving the Surface Characteristics of Mg AZ31B Alloy by RF Magnetron Sputtering

next chapter Influence of Input Factors on Surface Roughness When Using Wire-EDM SKD11 Tool Steel

Inasaki, I.: Monitoring and optimization of internal grinding process. CIRP Ann. 40(1), 359–362 (1991)CrossRef

Xiao, G., Malkin, S.: On-line optimization for internal plunge grinding. CIRP Ann. 45(1), 287–292 (1996)CrossRef

Hung, L.X., et al.: Determination of optimal exchanged grinding wheel diameter when internally grinding alloy tool steel 9CrSi. In: IOP Conference Series: Materials Science and Engineering. IOP Publishing (2018)

Hung, L.X., et al.: A study on coolant parameters in internal grinding of 9CrSi steel. In: Materials Science Forum. Trans Tech Publ (2019)

Tran, T.-H., et al.: Optimization of replaced grinding wheel diameter for minimum grinding cost in internal grinding. Appl. Sci. 9(7), 1363 (2019)CrossRef

Gao, S., Yang, C., Xu, J., Fu, Y., Su, H., Ding, W.: Optimization for internal traverse grinding of valves based on wheel deflection. Int. J. Adv. Manuf. Technol. 92(1–4), 1105–1112 (2017). https://doi.org/10.1007/s00170-017-0210-8CrossRef

Hung, L.X., et al.: A study on calculation of optimum exchanged grinding wheel diameter when internal grinding. Mater. Today: Proc. 18, 2840–2847 (2019)

Hung, L.X., et al.: Multi-objective optimization of dressing parameters of internal cylindrical grinding for 9CrSi Aloy steel using taguchi method and grey relational analysis. Mater. Today: Proc. 18, 2257–2264 (2019)

Nguyen, A.T., et al.: Optimization of dressing parameters for minimum surface roughness and maximum material removal rate in internal grinding of SKD11 tool steel. In: E3S Web of Conferences. EDP Sciences (2021)

10.

Hung, L.X., et al. Determining the optimum set of dressing parameters satisfying minimum surface roughness when conducting the internal grinding of hardened SKD11 steel. In: Solid State Phenomena. Trans Tech Publ (2021)

11.

Nguyen, H.-Q., et al.: A comparative study on multi-criteria decision-making in dressing process for internal grinding. Machines 10(5), 303 (2022)CrossRef

Title: Influence of Dressing Parameters on Surface Roughness and Wheel Life in Internal Grinding SKD11 Tool Steel
Authors: Tran Huu Danh
Nguyen Hong Linh
Bui Thanh Danh
Nguyen Anh Tuan
Nguyen Thi Quoc Dung
Hoang Xuan Tu
Le Xuan Hung
Publisher: Springer International Publishing
Book: Advances in Engineering Research and Application
Print ISBN: 978-3-031-22199-6

Electronic ISBN: 978-3-031-22200-9

Copyright Year: 2023
DOI: https://doi.org/10.1007/978-3-031-22200-9_64

Springer Professional

Abstract

Please log in to get access to your license.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Premium Partners