Top

Published in:

2022 | OriginalPaper | Chapter

Influence of the Design Features of Orbital Hydraulic Motors on the Change in the Dynamic Characteristics of Hydraulic Drives

Authors : Anatolii Panchenko, Angela Voloshina, Shahriyor S. Sadullozoda, Oleg Boltyansky, Valeriia Panina

Published in: Advances in Design, Simulation and Manufacturing V

Publisher: Springer International Publishing

Activate our intelligent search to find suitable subject content or patents.

search-config

AI-assisted search

Off

Abstract

The operation of power hydraulic drives of self-propelled vehicles is accompanied by oscillatory processes associated with the technical imperfection of the actuating elements of the hydraulic drive. In this regard, the issue of stabilizing the dynamic characteristics of hydraulic drives is an urgent problem. As a result of the research, the initial data and conditions have been substantiated, making it possible to simulate the transient processes occurring in the hydraulic drives of self-propelled vehicles. A structural-functional diagram and a mathematical apparatus have been developed to reveal the dynamics of changes in the characteristics of a hydraulic drive of self-propelled equipment, considering the conditions of its operation. Changes in the stability of the dynamic characteristics of hydraulic drives of self-propelled vehicles, under the influence of the design features of orbital hydraulic motors, have been determined. The acceleration time of the hydraulic motor No. 2 is 12% less than that of the hydraulic motor No. 1, while the pressure and torque fluctuations during steady motion are less by 34% and 17%, respectively. Such changes are due to a decrease in the gap between the teeth of the rotors of the hydraulic motor No. 2 and the elimination of fluctuations in the flow area of its distribution system.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

inform now

previous chapter A New Method of Optimization Synthesis of Vibro-Impact Systems

next chapter Mathematical Model of Lifting Particles of Technological Material by Vertical Auger

Kim, S.-Y., Nam, Y.-J., Park, M.-K.: Design of port plate in gerotor pump for reduction of pressure pulsation. J. Mech. Sci. Technol. 20(10), 1626–1637 (2006). https://doi.org/10.1007/BF02916266CrossRef

Sung, H.-J., Min, H.-K., Nam, Y.-J., Park, M.-K.: Design and experimental verification of a port plate in a gerotor pump to reduce pressure pulsation. J. Mech. Sci. Technol. 32(2), 671–678 (2018). https://doi.org/10.1007/s12206-018-0114-4CrossRef

Hsieh, C.F.: Flow characteristics of gerotor pumps with novel variable clearance designs. J. Fluids Eng. 137(4), 041107 (2015). https://doi.org/10.1115/1.4029274CrossRef

Sokolov, V., Porkuian, O., Krol, O., Stepanova, O.: Design calculation of automatic rotary motion electrohydraulic drive for technological equipment. In: Ivanov, V., Trojanowska, J., Pavlenko, I., Zajac, J., Peraković, D. (eds.) DSMIE 2021. LNME, pp. 133–142. Springer, Cham (2021). https://doi.org/10.1007/978-3-030-77719-7_14CrossRef

Panchenko, A., Voloshina, A., Titova, O., Panchenko, I., Zasiadko, A.: The study of dynamic processes of mechatronic systems with planetary hydraulic motors. In: Tonkonogyi, V., et al. (eds.) InterPartner 2020. LNME, pp. 704–713. Springer, Cham (2021). https://doi.org/10.1007/978-3-030-68014-5_68

Hsieh, C.F., Hwang, Y.W.: Geometric design for a gerotor pump with high area efficiency. J. Mech. Des. 129(12), 1269–1277 (2007). https://doi.org/10.1115/1.2779887CrossRef

Hsieh, C.F.: Fluid and dynamics analyses of a gerotor pump using various span angle designs. J. Mech. Des. 134(12), 121003 (2012). https://doi.org/10.1115/1.4007703CrossRef

Liu, H., Lee, J.-C., Yoon, A., Kim, S.-T.: Profile design and numerical calculation of instantaneous flow rate of a gerotor pump. J. Appl. Math. Phys. 3(1), 92–97 (2015). https://doi.org/10.4236/jamp.2015.31013CrossRef

Voloshina, A., Panchenko, A., Titova, O., Panchenko, I.: Changes in the dynamics of the output characteristics of mechatronic systems with planetary hydraulic motors. J. Phys: Conf. Ser. 1741, 012045 (2021). https://doi.org/10.1088/1742-6596/1741/1/012045CrossRef

10.

Vecchiato, D., Demenego, A., Argyris, J., Litvin, F.L.: Geometry of a cycloidal pump. Comput. Methods Appl. Mech. Eng. 190, 2309–2330 (2001). https://doi.org/10.1016/S0045-7825(00)00236-XCrossRefMATH

11.

Demenego, A., Vecchiato, D., Litvin, F.L., Nervegna, N., Mancó, S.: Design and simulation of meshing of a cycloidal pump. Mech. Mach. Theory 37(3), 311–332 (2002). https://doi.org/10.1016/S0094-114X(01)00074-XCrossRefMATH

12.

Panchenko, A., Voloshina, A., Panchenko, I., Pashchenko, V., Zasiadko, A.: Influence of the shape of windows on the throughput of the planetary hydraulic motor’s distribution system. In: Ivanov, V., Pavlenko, I., Liaposhchenko, O., Machado, J., Edl, M. (eds.) DSMIE 2021. LNME, pp. 146–155. Springer, Cham (2021). https://doi.org/10.1007/978-3-030-77823-1_15CrossRef

13.

Choi, T.H., Kim, M.S., Lee, G.S., and others: design of rotor for internal gear pump using cycloid and circular-arc curves. J. Mech. Des. 134(1), 011005 (2012). https://doi.org/10.1115/1.4004423

14.

O’Shea, C.: Hydraulic Flow Ripple Cancellation Using the Primary Flow Source. Symposium on Fluid Power and Motion Control FPMC2016-1783 (2016). https://doi.org/10.1115/FPMC2016-1783

15.

Tkachuk, M.M., Grabovskiy, A., Tkachuk, M.A., Saverska, M., Hrechka, I.: A semi-analytical method for analys of contact interaction between structural elements along aligned surfaces. Eastern-Euro. J. Enterp. Technol. 1/7(103), 16–25 (2020). https://doi.org/10.15587/1729-4061.2020.193985

16.

Tkachuk, M.M., Grabovskiy, A., Tkachuk, M.A., Hrechka, I., Ishchenko, O., Domina, N.: Investigation of multiple contact interaction of elements of shearing dies. Eastern-Europ. J. Enterp. Technol. 4/7(100), 6–15 (2019). http://journals.uran.ua/eejet/ article/view/174086/175737

17.

Atroshenko, O., Tkachuk, M., Ustinenko, O., Bondarenko, O., Diomina, N.: A numerical analysis of non-linear contact tasks for the system of plates with a bolted connection and a clearance in the fixture. Eastern-Europ. J. Enterp. Technol. 1/7(79), 24–29 (2016). http://journals.uran.ua/eejet/article/view/60087

18.

Tkachuk M.: A numerical method for axisymmetric adhesive contact based on Kalker's variational principle. Eastern-Europ. J. Enterp. Technol. 3/7(93), 34–41 (2018). https://doi.org/10.15587/1729-4061.2018.132076

19.

Rogovyi, A., Khovanskyi, S., Hrechka, I., Gaydamaka, A.: Studies of the swirling submerged flow through a confuser. In: Ivanov, V., Pavlenko, I., Liaposhchenko, O., Machado, J., Edl, M. (eds.) DSMIE 2020. LNME, pp. 85–94. Springer, Cham (2020). https://doi.org/10.1007/978-3-030-50491-5_9CrossRef

20.

Rogovyi, A., Korohodskyi, V., Khovanskyi, S., Hrechka, I., Medvediev, Y.: Optimal design of vortex chamber pump. J. Phys. Conf. Ser. 1741(1), 012018 (2021). https://doi.org/10.1088/1742-6596/1741/1/012018CrossRef

21.

Andrenko, P., Rogovyi, A., Hrechka, I., Khovanskyi, S., Svynarenko, M.: Characteristics improvement of labyrinth screw pump using design modification in screw. J. Phys. Conf. Ser. 1741(1), 012024 (2021). https://doi.org/10.1088/1742-6596/1741/1/012024CrossRef

22.

Korohodskyi, V., Kryshtopa, S., Migal, V., Rogovyi, A., et al.: Determining the characteristics for the rational adjusting of an fuelair mixture composition in a two-stroke engine with internal carburation. Eastern-Europ. J. Enterp. Technol. 2(5), 39–52 (2020). http://journals.uran.ua/eejet/article/view/200766

23.

Rogovyi, A., Korohodskyi, V., Medvediev, Y.: Influence of Bingham fluid viscosity on energy performances of a vortex chamber pump. Energy 218, 119432 (2021). https://doi.org/10.1016/j.energy.2020.119432CrossRef

24.

Van de Ven, J. On fluid compressibility in switch-mode hydraulic circuits. part i: modeling and analysis. J. Dyn. Syst. Measure. Control 135(2), 021013-021013-13 (2012). https://doi.org/10.1115/1.4023062

25.

Van de Ven J.: On fluid compressibility in switch-mode hydraulic circuits. part II: experimental results. J. Dyn. Syst. Measure. Control 135(2), 021014-021014-7 (2012). https://doi.org/10.1115/1.4023063

26.

Velev, E.: Study cavitation gerotor motors. Using computer simulation. In: XV International Scientific Conference: Renewable Energies and Innovative Technologies, pp. 64–66 (2016)

27.

Marcu, I., Pop, I.: Interconnection possibilities for the working volumes of the alternating hydraulic motors. Scientific Bulletin of the Politehnica University of Timisoara, Special issue: Transactions on Mechanics, pp. 365–370 (2004)

28.

Buono, D., Schiano di Cola, F.D., Senatore, A., Frosina, E., Buccilli, G., Harrison, J.: Modelling approach on a Gerotor pump working in cavitation conditions. Energy Procedia 101, 701–709 (2016). https://doi.org/10.1016/j.egypro.2016.11.089

29.

Shah, Y. G., Vacca, A., Dabiri, S. A fast lumped parameter approach for the prediction of both aeration and cavitation in Gerotor pumps. Meccanica 53, 175–191 (2018). https://doi.org/10.1007/s11012-017-0725-y

30.

Strutynsky, V., Hurzhi, A., Kozlov, L.: Determination of static equilibrium conditions of mobile terrestrial complex with lever-type manipulator. Naukovyi Visnyk NHU 5, 79–86 (2019). https://doi.org/10.29202/nvngu/2019-5/7

31.

Strutinsky, V., Demyanenko, A.: The development of mechatronic active control system of tool spatial position of parallel kinematics machine tool. J. Theor. Appl. Mech. 54(3), 757–768 (2016). https://doi.org/10.15632/jtam-pl.54.3.757

32.

Strutynskyi, S.: Defining the dynamic accuracy of positioning of spatial drive systems through consistent analysis of processes of different range of performance. Naukovyi Visnyk NHU 3, 64–73 (2018).https://doi.org/10.29202/nvngu/2018-3/13

33.

Strutynskyi, S., Nochnichenko, I.: Design of parallel link mobile robot manipulator mechanisms based on function-oriented element base. Eastern-Europ. J. Enterp. Technol. 4(7)(100), 54–64 (2019). https://doi.org/10.15587/1729-4061.2019.174613

34.

Bulgakov, V., Ivanovs, S., Adamchuk, V., Antoshchenkov, R.: Investigations of the dynamics of a four-element machine-and-tractor aggregate. Acta Technol. Agric. 22(4), 146–151 (2019). https://doi.org/10.2478/ata-2019-0026CrossRef

35.

Galych, I., Antoshchenkov, R., Antoshchenkov, V., Lukjanov, I., Diundik, S., Kis, O.: Estimating the dynamics of a machine-tractor assembly considering the effect of the supporting surface profile. Eastern-Europ. J. Enterp. Technol. 1(7)(109), 51–62 (2021). https://doi.org/10.15587/1729-4061.2021.225117

36.

Pylypaka, S., Klendiy, M., Zaharova, T.: Movement of the particle on the external surface of the cylinder, which makes the translational oscillations in horizontal planes. In: Ivanov, V., et al. (eds.) DSMIE 2018. LNME, pp. 336–345. Springer, Cham (2019). https://doi.org/10.1007/978-3-319-93587-4_35

37.

Dzyuba, O., Dzyuba, A., Polyakov, A., Volokh, V., Antoshchenkov, R., Mykhailov, A.: Studying the influence of structural-mode parameters on energy efficiency of the plough PLN-3–35. Eastern-Europ. J. Enterp. Technol. 3(1)(99), 55–65 (2019). https://doi.org/10.15587/1729-4061.2019.169903

38.

Tkachuk, M.M., Grabovskiy, A., Tkachuk, M.A., Zarubina, A., Lipeyko, A.: Analysis of elastic supports and rotor flexibility for dynamics of a cantilever impeller. J. Phys. Conf. Ser. 1741(1), 012043 (2021). https://doi.org/10.1088/1742-6596/1741/1/012043CrossRef

39.

Heisel, U., Strytinsky, S., Sidorco, V., Filatov, Y., Storchac, M.: Development of controllable spherical fluid friction hinges for exact spatial mechanisms. German Acad. Soc. Prod. Eng. 1, 62–71 (2011). https://doi.org/10.1007/s11740-010-0291-9CrossRef

40.

Pavlenko, I., Simonovskiy, V., Ivanov, V., Zajac, J., Pitel, J.: Application of artificial neural network for identification of bearing stiffness characteristics in rotor dynamics analysis. In: Ivanov, V., et al. (eds.) DSMIE 2018. LNME, pp. 325–335. Springer, Cham (2019). https://doi.org/10.1007/978-3-319-93587-4_34CrossRef

41.

Rezvaya, K., Krupa, E., Shudryk, A., Drankovskiy, V., Makarov, V.: Solving the hydrodynamical tasks using CFD programs. In: 3rd International Conference on Intelligent Energy and Power Systems, vol. 1, p. 8308004 (2018). https://doi.org/10.1109/IEPS.2018.8559548

42.

Gentner, C., Sallaberger, M., Widmer, C., Braun, O., Staubli, T.: Numerical and experimental analysis of instability phenomena in pump turbines. IOP Conf. Ser. Earth Environ. Sci. 15(3), 0320422 (2012). https://doi.org/10.1088/1755-1315/15/3/032042CrossRef

43.

Panchenko, A., Voloshina, A., Kiurchev, S., and others: Development of the universal model of mechatronic system with a hydraulic drive. Eastern-Europ. J. Enterp. Technol. 4(7)(94), 51–60 (2018). https://doi.org/10.15587/1729-4061.2018.139577

44.

Kiurchev, S., Luzan, P., Zasiadko, A., Radionov, H., Boltianska, N.: Influence of the flow area of distribution systems on changing the operating parameters of planetary hydraulic motors. IOP Conf. Ser. Mater. Sci. Eng. 1021, 012037 (2021). https://doi.org/10.1088/1757-899X/1021/1/012037CrossRef

45.

Pavlenko, I., Trojanowska, J., Ivanov, V., Liaposhchenko, O.: Scientific and methodological approach for the identification of mathematical models of mechanical systems by using artificial neural networks. In: Machado, J., Soares, F., Veiga, G. (eds.) HELIX 2018. LNEE, vol. 505, pp. 299–306. Springer, Cham (2019). https://doi.org/10.1007/978-3-319-91334-6_41CrossRef

46.

Kalinichenko, P., Gusak, O., Khovanskyy, S., Krutas, Y.: Substantiation and development of the procedure for calculating a hydraulic balancing device under condition of minimal energy losses. Eastern-Europ. J. Enterp. Technol. 2(7–86), 36–41 (2017). https://doi.org/10.15587/1729-4061.2017.97162CrossRef

47.

Sokolov, V., Porkuian, O., Krol, O., Baturin, Y.: Design calculation of electrohydraulic servo drive for technological equipment. In: Ivanov, V., Trojanowska, J., Pavlenko, I., Zajac, J., Peraković, D. (eds.) DSMIE 2020. LNME, pp. 75–84. Springer, Cham (2020). https://doi.org/10.1007/978-3-030-50794-7_8CrossRef

48.

Altare, G., Rundo, M.: Computational fluid dynamics analysis of gerotor lubricating pumps at high-speed: geometric features influencing the filling capability. J. Fluids Eng. 138(11), FE-15–1757 (2016). https://doi.org/10.1115/1.4033675

49.

Onysko, O., Karabegović, I., Dašić, P., Penderetskyi, M., Melnyk, O.: The stress state of compact mechatronic satellites of a cycloidal reducer. J. Eng. Sci. 8(2), D12–D17 (2021). https://doi.org/10.21272/jes.2021.8(2).d3CrossRef

Title: Influence of the Design Features of Orbital Hydraulic Motors on the Change in the Dynamic Characteristics of Hydraulic Drives
Authors: Anatolii Panchenko
Angela Voloshina
Shahriyor S. Sadullozoda
Oleg Boltyansky
Valeriia Panina
Publisher: Springer International Publishing
Book: Advances in Design, Simulation and Manufacturing V
Print ISBN: 978-3-031-06043-4

Electronic ISBN: 978-3-031-06044-1

Copyright Year: 2022
DOI: https://doi.org/10.1007/978-3-031-06044-1_10

Springer Professional

Abstract

Please log in to get access to your license.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Premium Partners