Top

Steel in Translation

Published in:

01-04-2019

Influence of Vanadium on Carbide Deposition in the Working Layer of ICDP Iron Rollers

Authors: K. N. Vdovin, N. V. Koptseva, D. S. Gorlenko, N. A. Feoktistov, D. V. Kuryaev

Published in: Steel in Translation | Issue 4/2019

Activate our intelligent search to find suitable subject content or patents.

search-config

AI-assisted search

Off

Abstract

Abstract—The influence of vanadium on the microstructure, carbide deposition, and hardness of the chromonickel indefinite iron alloyed with ferrovanadium in the working layer of rollers is investigated. The microstructure of iron alloyed with nonnitrided ferrovanadium consists of primary dendrites; ledeburite; a small quantity of graphite; complex carbides MeC and carboborides Me(C, B) containing niobium, titanium, vanadium and chromium; and also chromium carbides of plate or needle morphology. In samples alloyed with nitrided ferrovanadium, the complex carbonitrides Me(C, N) are also seen. With increase in vanadium content, the proportion of these particles increases from 0.17 to 0.9% for samples alloyed with nonnitrided ferrovanadium and from 0.45 to 0.9% for samples alloyed with nitrided ferrovanadium. Their mean area varies from 1.5 to 2 μm² and from 1.4 to 1.8 μm², respectively. In iron alloyed with nitrided ferrovanadium, the maximum hardness (770 HV at a vanadium concentration of 0.4%) is greater than in samples alloyed with nonnitrided ferrovanadium (710 HV at a vanadium concentration of 0.3%).

previous article Drawing of Thin-Walled Welded Pipe

next article Behavior of Fine Pearlite Plates in the Deformation of High-Carbon Steel

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

inform now

Beshlyk, A.S., Chugunnye prokatnye valki (Cast Iron Mill Rolls), Moscow: Metallurgizdat, 1955.

Budag’yants, N.A. and Karsskii, V.E., Litye prokatnye valki (Casted Mill Rolls), Moscow: Metallurgiya, 1983.

Vdovin, K.N., Prokatnye vlaki: monografiya (Mill Rolls: Monograph), Magnitogorsk: Magnitogorsk. Gos. Tekh. Univ. im. G.I. Nosova, 2013.

Sinnave, M., New brands of mill rolls and their prospective development, Stal’, 2003, no. 7, pp. 48–52.

Martini, F., Main manufacturing and service requirements for the backup rolls and work rolls of modern hot-strip mills, Metallurgist, 1999, vol. 43, no. 8, pp. 365–370.CrossRef

Gimaletdinov, R.Kh., Proizvodstvo prokatnykh valkov iz vysokokachestvennykh chugunov (Manufacturing of Mill Rolls from High-Quality Cast Iron), Moscow: Polteks, 2000.

Balakleets, I.A., Filippov, V.S., Shebanits, E.N., et al., Modern trends in manufacturing and use of mill rolls, Met. Lit’e Ukr., 2012, nos. 2–3, pp. 225–226.

Gulakov, A.a., tukhvatulin, I.Kh., and Dolgopolova, L.B., Improvement of mill rolls from high-strength cast iron, Liteinye Protsessy, 2013, no. 12, pp. 60–63.

Voronkov, B.V., Kolokol’tsev, V.M., and Petrochenko, E.V., Kompleksno-legirovannye iznosostoikie chuguny: monografiya (Complex Alloyed Refractory Cast Irons: Monograph), Kolokol’tsev, V.M., Ed., Chelyabinsk: REKPOL, 2005.

10.

Vdovin, K.N., Tsybrov, S.V., Borovkov, I.V., et al., Manufacturing and use of new brands of mill rolls for hot rolling mills at Magnitogorsk Metallurgical Plant, in Liteinye protsessy (Foundry Processes), Magnitogorsk: Magnitogorsk. Gos. Tekh. Univ. im. G.I. Nosova, 2004, no. 4, pp. 43–48.

11.

Krivosheev, A.E., Otbelivaemost’ chuguna i kachestvo valkov (Iron Bleachability and Roll Quality), Dnepropetrovsk: Dnepropetrovsk. Met. Inst., 1948, vol. 15, pp. 3–30.

12.

Filippov, A.S., et al., Development of a centrifugal method for the production of cast iron mill rolls, in Povyshenie proizvoditel’nosti truda v liteinom proizvodstve (Improvement of Labor Performance in the Foundry Industry), Moscow: Mashinostroenie, 1969, pp. 222–231.

13.

Tsybrov, S.V., Vdovin, K.N., and Zaitsev, A.A., Improvement of operational characteristics of indefinite mill rolls of centrifugal casting, Liteishchik Ross., 2012, no. 3, pp. 30–32.

14.

Borovkov, I.V., Nosov, V.L., Kazakov, I.V., et al., Use of indefinite rolls manufactured at Magnitogorsk Plant of Rolling Rolls on the sheet-rolling mills at Magnitogorsk Metallurgical Plant, in Sovershenstvovanie tekhnologii na OAO “MMK” (Technology Improvement at the Magnitogorsk Metallurgical Plant), Magnitogorsk: Magnitogorsk. Dom Pechati, 2006, no. 10, pp. 156–161.

15.

Feoktistov, N.A. and Tsybrov, S.V., Effect of chemical composition of cast iron on wear resistance and solidity of cast iron, in Liteinye protsessy (Foundry Processes), Magnitogorsk: Magnitogorsk. Gos. Tekh. Univ. im. G.I. Nosova, 2009, no. 8, pp. 19–23.

16.

Tsybrov, S.V., Vdovin, K.N., and Zaitseva, A.A., Selection of alloying elements for structure formation of the working layer of the cast iron mill rolls, 4-i Mezhdunarodnyi promyshlennyi forum “Rekonstruktsiya promyshlennykh predpriyatii: proryvnye tekhnologii v metallurgii i mashinostroenii” (Fourth Int. Industrial Forum “Reconstruction of Industrial Enterprises: Advanced Technologies in Metallurgy and Machine Engineering”), Magnitogorsk: Magnitogorsk. Gos. Tekh. Univ. im. G.I. Nosova, 2011.

17.

Gimaletdinov, R.Kh., Gulakov, A.A., and Tukhvatulin, I.Kh., The influence of chemical composition on the properties of the working layer of centrifugally casted indefinite mill rolls, Vestn. Magnitogorsk. Gos. Tekh. Univ. im. G.I. Nosova, 2016, vol. 14, no. 3, pp. 78–89.

18.

Kolokol’tsev, V.M., Naumenko, A.V., Kuts, V.A., et al., The effect of alloying elements on the properties of cast iron mill rolls for hot rolling, Teor. Tekhnol. Metall. Proizvod., 2001, no. 2, pp. 210–219.

19.

Khosen Ri, Bomko, N.F., and Brichenok, A.S., Carbide phases in complex-alloyed white cast irons, in Liteinye protsessy (Foundry Processes), Magnitogorsk: Magnitogorsk. Gos. Tekh. Univ. im. G.I. Nosova, 2002, no. 2, pp. 34–36.

20.

Koptseva, N.V., Chukin, M.V., and Nikitenko, O.A., Use of the Thixomet pro software for quantitative analysis of the ultrafine-grain structure of low-and medium-carbon steels subjected to equal channel angular pressing, Met. Sci. Heat Treat., 2012, vol. 54, nos. 7–8, pp. 387–392.CrossRef

21.

Pechenkina, L.S., Sil’man, G.I., and Rukavitsyna, A.A., Effect of chromium and vanadium on the structure of low-carbon white cast irons, Vestn. Voronezh. Gos. Tekh. Univ., 2015, vol. 11, no. 6, pp. 13–17.

Title: Influence of Vanadium on Carbide Deposition in the Working Layer of ICDP Iron Rollers
Authors: K. N. Vdovin
N. V. Koptseva
D. S. Gorlenko
N. A. Feoktistov
D. V. Kuryaev
Publication date: 01-04-2019
Publisher: Pleiades Publishing
Published in: Steel in Translation / Issue 4/2019
Print ISSN: 0967-0912
Electronic ISSN: 1935-0988
DOI: https://doi.org/10.3103/S0967091219040132

Springer Professional

Abstract

Please log in to get access to your license.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Other articles of this Issue 4/2019

Production of Heavy Plates of Pipe Steel with Increased Strength and Cold Resistance on the 5000 Rolling Mill at PJSC MMK

Electromagnetic Stirring in Continuous-Casting Machines

Improving Cylindrical Inconel 718 Ingots Produced at PAO Ruspolimet

Creep Resistance of Ferrite–Martensite Steel for Nuclear Reactors

Behavior of Fine Pearlite Plates in the Deformation of High-Carbon Steel

Decreasing the Heat Losses at the Air Tuyeres in Blast Furnaces

Premium Partners