Top

Published in:

2017 | OriginalPaper | Chapter

5. Integrated Computational Materials and Production Engineering (ICMPE)

Authors : Wolfgang Bleck, Christian Brecher, Michael Herty, Gerhard Hirt, Christian Hopmann, Fritz Klocke, Nikolai Borchmann, Jens Dierdorf, Hamidreza Farivar, Patrick Fayek, Axel Häck, Viktor Kripak, Markus Krömer, Gottfried Laschet, Ulrich Prahl, Markus Rüngeler, Georg J. Schmitz, Marcel Spekowius, Phillip Springer, Andre M. Teixeira

Published in: Integrative Production Technology

Publisher: Springer International Publishing

Activate our intelligent search to find suitable subject content or patents.

search-config

AI-assisted search

Off

Abstract

The research area “Integrative Computational Materials and Production Engineering” is based on the partial integration of individual models areas within separated simulation platforms with the objective of further development and integration into a single comprehensive ICMPE (Integrative Computational Materials and Production Engineering) platform that combines materials and machining simulation with factory and production planning. In order to realize an operational platform concept, the AixViPMaP has been implemented. AixViPMaP serves as a technology platform for the knowledge-driven design, implementation and improvement of complicated process chains for materials in high-value components. This allows manufacturing related influences to be considered during production in order to optimize process performance and materials properties. The extension and application of the AixViPMaP platform towards production modeling in the sense of an ICMPE based on one holistic system integrates production related models with all material-related models into a single, unified concept. Advanced test cases are under examination to validate and assess this new integrated approach (e.g., new alloys for large gears for the wind industry).

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Wirtschaft"

Online-Abonnement

Mit Springer Professional "Wirtschaft" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 340 Zeitschriften

aus folgenden Fachgebieten:

Bauwesen + Immobilien
Business IT + Informatik
Finance + Banking
Management + Führung
Marketing + Vertrieb
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

inform now

previous chapter Virtual Production Intelligence (VPI)

next chapter Multi-technology Platforms (MTPs)

Albi G, Bongini M, Cristiani E, Kalise D (2015) Invisible control of self-organizing agents leaving unknown environments. arXiv preprint arXiv:1504.04064

Allwood JM, Cullen JM, Carruth MA (2012) Sustainable materials with both eyes open. UIT Cambridge Ltd, Cambridge, England

Alogab KA, Matlock DK, Speer JG, Kleebe HJ (2007) The influence of niobium microalloying on austenite grain coarsening behavior of Ti-modified SAE 8620 steel. ISIJ Int 47(2):307–316. doi:10.2355/isijinternational.47.307 CrossRef

Armbruster D, Degond P, Ringhofer C (2006) A model for the dynamics of large queuing networks and supply chains. SIAM J Appl Math 66(3):896–920MathSciNetCrossRefMATH

Assouline E, Wachtel E, Grigull S, Lustiger A, Wagner HD, Marom G (2001) Lamellar twisting in α isotactic polypropylene transcrystallinity investigated by synchrotron microbeam X-ray diffraction. Polymer 42(14):6231–6237. doi:10.1016/S0032-3861(01)00087-8 CrossRef

ASTM, Committee A-1 on Steel, Stainless Steel, and Related Alloys, Subcommittee A01.15 on Bars (2010) Standard test methods for determining hardenability of steel. American Society for Testing and Materials, West Conshohocken, Pennsylvania

Avrami M (1939) Kinetics of phase change. I general theory. J Chem Phys 7(12):1103. doi:10.1063/1.1750380 CrossRef

Bambach M, Schmitz GJ, Prahl U (2013) ICME–a mere coupling of models or a discipline of its own? In: 2nd world congress on integrated computational materials engineering, pp 285–290

Bedoui F, Diani J, Regnier G, Seiler W (2006) Micromechanical modeling of isotropic elastic behavior of semicrystalline polymers. Acta Mater 54(6):1513–1523. doi:10.1016/j.actamat.2005.11.028 CrossRef

Brecher C (2012) Integrative production technology for high-wage countries. Springer, Berlin, New YorkCrossRef

Brömsen O (2005) Steigerung der Zahnfusstragfähigkeit von einsatzgehärteten Stirnrädern durch rechnerische Zahnfussoptimierung. Berichte aus der Produktionstechnik, Bd. 2005, 7. Shaker, Aachen

Calculation of load capacity of spur and helical gears (ISO 6336)

Cardona M, Fulde P, von Klitzing K, Queisser H, Merlin R, Störmer H, Mehrer H (2007) Diffusion in solids, vol 155. Springer, Berlin

Castelein G, Coulon G, G’sell C (1997) Polymers under mechanical stress: deformation of the nanostructure of isotactic polypropylene revealed by scanning force microscopy. Polym Eng Sci 37(10):1694–1701. doi:10.1002/pen.11817 CrossRef

Clausen B, Konovalov S, Hoffmann F, Prahl U, Zoch H, Bleck W (2010) Feinkornbeständigkeit von Bauteilen aus dem mikrolegierten Werkstoff 18CrNiMo7-6 in Abhängigkeit der Prozesskette. HTM 65(5):257–268. doi:10.3139/105.110073 CrossRef

Coppola S, Grizzuti N, Maffettone PL (2001) Microrheological modeling of flow-induced crystallization. Macromolecules 34(14):5030–5036. doi:10.1021/ma010275e CrossRef

Cullen JM, Allwood JM, Bambach MD (2012) Mapping the global flow of steel: from steelmaking to end-use goods. Environ Sci Technol 46(24):13048–13055. doi:10.1021/es302433p CrossRef

D’Apice C (2010) Modeling, simulation, and optimization of supply chains: a continuous approach. Society for Industrial and Applied Mathematics, PhiladelphiaCrossRef

Davis JR (2005) Gear materials, properties, and manufacture. ASM International, Materials Park, Ohio

Degond P, Göttlich S, Herty M, Klar A (2007) A network model for supply chains with multiple policies. Multiscale Model Simul 6(3):820–837. doi:10.1137/060670316 MathSciNetCrossRefMATH

Dieter GE, Kuhn HA, Semiatin SL (2003) Handbook of workability and process design. ASM International, Materials Park, OH

Doi M, Edwards SF (1986) The theory of polymer dynamics. The international series of monographs on physics, vol 73. Clarendon Press, Oxford

Europäisches Komitee für Normung (2012) Stahl - Mikrophotographische Bestimmung der erkennbaren Korngröße (ISO 643:2012–12)

Fetters LJ, Lohse DJ, Colby RH (2007) Chain dimensions and entanglement spacings. In: Mark JE (ed) Physical properties of polymers handbook. Springer, New York, pp 447–454CrossRef

Frotey M, Sourmail T, Munier R (2013) Alternative to Ni bearing steels for deep carburizing of wind turbine gears. In: Abel D (ed) Conference for wind power drives CWD 2013: Tagungsband Aachen, 19–20 März 2013, 1. Auflage Apprimus-Verleger, Aachen, pp 167–180

Frühe T (2012) Berechnung und Minimierung der Zahnfußspannung von Standard- und LowLoss-Verzahnungen. Ingenieurwissenschaften. Dr, Hut, München

Gawroński Z, Malasiński A, Sawicki J (2010) Elimination of galvanic copper plating process used in hardening of conventionally carburized gear wheels. Int J Automot Technol 11(1):127–131. doi:10.1007/s12239-010-0017-1

Gorockiewicz R (2011) The kinetics of low-pressure carburizing of alloy steels. Vacuum 86(4):448–451. doi:10.1016/j.vacuum.2011.09.006 CrossRef

Gräfen W, Edenhofer B (2005) New developments in thermo-chemical diffusion processes. Surf Coat Technol 200(5–6):1830–1836. doi:10.1016/j.surfcoat.2005.08.107 CrossRef

Grossmann M (1942) Hardenability calculations from chemical composition. AIME Trans 150:227–259

Haeck A, Bambach M, Herty M (2015) Modeling steel rolling processes by fluid–like differential equations preprint. RWTH Aachen, IGPM

Hemmelmann JE (2007) Simulation des lastfreien und belasteten Zahneingriffs zur Analyse der Drehübertragung von Zahnradgetrieben. Dissertation, RWTH Aachen

Henke T, Hirt G, Bambach M (2013) Randwertermittlung für die robuste Auslegung von Schmiedeprozessen. Werkstatttechnik online 103(10):783–788

Herty M, Jörres C, Sandjo AN (2012) Optimization of a model Fokker-Planck equation. Kinet Relat Models 5(3):485–503MathSciNetCrossRefMATH

Hippenstiel F, Mohrbacher H (2011) Optimization of molybdenum alloyed carburizing steels by Nb microalloying for large gear applications. In: Materials science and technology, Columbus, OH

Hirschvogel M, Dommelen H (1992) Some applications of cold and warm forging. J Mater Process Technol 35(3–4):343–356. doi:10.1016/0924-0136(92)90326-N CrossRef

Hirt G, Bambach M, Seuren S, Henke T, Lohmar J (2013) Recent developments in modeling of hot rolling processes: Part I—fundamentals. In: The 11th international conference on numerical methods in industrial forming processes: numiform 2013. AIP, pp 222–230

Hoffman JD, Davis GT, Lauritzen JI (1976) The rate of crystallization of linear polymers with chain folding. In: Hannay NB (ed) Treatise on solid state chemistry. Springer, Boston, pp 497–614CrossRef

Ivanov DS, Lomov SV, Ivanov SG, Verpoest I (2010) Stress distribution in outer and inner plies of textile laminates and novel boundary conditions for unit cell analysis. Compos A Appl Sci Manuf 41(4):571–580. doi:10.1016/j.compositesa.2010.01.004 CrossRef

Janeschitz-Kriegl H (2010) Crystallization modalities in polymer melt processing. Springer, ViennaCrossRef

Jaster M (2010) Why vacuum carburizing. Geartechnology 27(3):31–35

Johnson WA, Mehl RF (1939) Reaction kinetics in processes of nucleation and growth. Trans Metall Soc AIME 135(8):396–415

Just E (1969) New formulas for calculating hardenability curves. Metal Prog 96(5):87–88

Kalpakjian S, Schmid SR (2001) Manufacturing engineering and technology, 4th edn. Pearson, New Delhi

Kamezawa M, Yamada K, Takayanagi M (1979) Preparation of ultrahigh modulus isotactic polypropylene by means of zone drawing. J Appl Polym Sci 24(5):1227–1236. doi:10.1002/app.1979.070240508 CrossRef

Khan RU, Bajohr S, Buchholz D, Reimert R, Minh HD, Norinaga K, Janardhanan VM, Tischer S, Deutschmann O (2008) Pyrolysis of propane under vacuum carburizing conditions: an experimental and modeling study. J Anal Appl Pyrol 81(2):148–156. doi:10.1016/j.jaap.2007.09.012 CrossRef

Klar A, Wegener R (2004) Traffic flow: models and numerics. In: Bellomo N, Degond P, Pareschi L, Russo G (eds) Modeling and computational methods for kinetic equations. Birkhäuser Boston, Boston, MA, pp 219–258CrossRef

Klein MM (2012) Zur Fresstragfähigkeit von Kegelrad- und Hypoidgetrieben. Ingenieurwissenschaften. Verlag Dr, Hut, München

Kolmogorov VL (1937) On the statistical theory of the crystallization of metals. Bull Russ Acad Sci (1):355–359

Konovalov S (2015) Numerische Entwicklung eines mikrolegierten Einsatzstahls für die Hochtemperatur-Aufkohlung. Dissertation

Konter AWA, Farivar H, Post J, Prahl U (2015) Industrial needs for ICME. JOM, 1–11

Kopp R, Wiegels H (1999) Einführung in die Umformtechnik, 2nd edn. Aufl. Mainz, Aachen

Kula P, Dybowski K, Wolowiec E, Pietrasik R (2014) “Boost-diffusion” vacuum carburising—process optimisation. Vacuum 99:175–179. doi:10.1016/j.vacuum.2013.05.021 CrossRef

Kula P, Korecki M, Pietrasik R, Wolowiec E, Dybowski K, Kolodziejczyk L (2009) FineCarb ®—the flexible system for low pressure carburizing. New Options Perform 49(1):133–136

Kula P, Pietrasik R, Dybowski K (2005) Vacuum carburizing—process optimization. J Mater Process Technol 164–165:876–881. doi:10.1016/j.jmatprotec.2005.02.145 CrossRef

Kula P, Wolowiec E, Pietrasik R, Dybowski K, Klimek L (2012) The precipitation and dissolution of alloy iron carbides in vacuum carburization processes for automotive and aircraft applications—Part I. AMR 486:297–302. doi:10.4028/www.scientific.net/AMR.486.297 CrossRef

Laschet G, Apel M (2010) Thermo-elastic homogenization of 3d steel microstructure simulated by the phase-field method. Steel Res Int 81(8):637–643. doi:10.1002/srin.201000077

Lavtar L, Muhič T, Kugler G, Terčelj M (2011) Analysis of the main types of damage on a pair of industrial dies for hot forging car steering mechanisms. Eng Fail Anal 18(4):1143–1152. doi:10.1016/j.engfailanal.2010.11.002 CrossRef

Li L, Chan C, Yeung KL, Li J, Ng K, Lei Y (2001) Direct observation of growth of lamellae and spherulites of a semicrystalline polymer by AFM. Macromolecules 34(2):316–325. doi:10.1021/ma000273e CrossRef

Liedtke D (2003) Über den Zusammenhang zwischen dem Kohlenstoffgehalt in Stählen und der Härte des Martensits. Mat-wiss u Werkstofftech 34(1):86–92. doi:10.1002/mawe.200390022 CrossRef

Lucyshyn T, Knapp G, Kipperer M, Holzer C (2012) Determination of the transition temperature at different cooling rates and its influence on prediction of shrinkage and warpage in injection molding simulation. J Appl Polym Sci 123(2):1162–1168. doi:10.1002/app.34591 CrossRef

Lütkehus I, Salecker H, Adlunger K (2015) Potenzial der Windenergie an Land. www.umweltbundesamt.de

Luton M, Sellars C (1969) Dynamic recrystallization in nickel and nickel-iron alloys during high temperature deformation. Acta Metall 17(8):1033–1043. doi:10.1016/0001-6160(69)90049-2 CrossRef

Mamalis AG, Manolakos DE, Baldoukas AK (1996) Simulation of the precision forging of bevel gears using implicit and explicit FE techniques. J Mater Process Technol 57(1–2):164–171. doi:10.1016/0924-0136(95)02058-6 CrossRef

Michaeli W, Hopmann C, Baranowski T, Laschet G, Heesel B, Arping T, Bobzin K, Kashko T, Öte M (2012) Test Case: Technical Plastic Parts. In: Schmitz GJ, Prahl U (eds) Integrative computational materials engineering. Wiley-VCH Verlag GmbH & Co, KGaA, Weinheim, Germany, pp 221–256CrossRef

Michailidis L, Herty M, Ziegler M (2015) Kinetic part-feeding models for assembly lines in automotive industries. Math Models Methods Appl Sci 25(02):283–308. doi:10.1142/S0218202515500104 MathSciNetCrossRefMATH

Michler GH, Baltá-Calleja FJ (2012) Nano- and micromechanics of polymers: Structure modification and improvement of properties. Hanser, München, Cincinnati, OhioCrossRef

Mueller S, Llewellin EW, Mader HM (2011) The effect of particle shape on suspension viscosity and implications for magmatic flows. Geophys Res Lett 38(13):n/a–n/a. doi:10.1029/2011GL047167

Murakami Y (2002) Metal fatigue: effects of small defects and nonmetallic inclusions. Elsevier, Oxford

Murakami Y (2012) Material defects as the basis of fatigue design. Int J Fatigue 41:2–10. doi:10.1016/j.ijfatigue.2011.12.001 CrossRef

Nakamura K, Katayama K, Amano T (1973) Some aspects of nonisothermal crystallization of polymers. II. Consideration of the isokinetic condition. J Appl Polym Sci 17(4):1031–1041. doi:10.1002/app.1973.070170404 CrossRef

Nieder T, Bickel P, Musiol F (2015) Development of renewable energy sources in Germany 2014. www.erneuerbare-energien.de

Niemann G, Winter H (2003) Maschinenelemente: band 2: Getriebe allgemein, Zahnradgetriebe - Grundlagen, Stirnradgetriebe. Springer, Berlin

Olsson E, Kreiss G (2005) A conservative level set method for two phase flow. J Comput Phys 210(1):225–246. doi:10.1016/j.jcp.2005.04.007 MathSciNetCrossRefMATH

Osher S, Sethian JA (1988) Fronts propagating with curvature-dependent speed: algorithms based on Hamilton-Jacobi formulations. J Comput Phys 79(1):12–49. doi:10.1016/0021-9991(88)90002-2 MathSciNetCrossRefMATH

Rodrigues J (2005) Tecnologia mecânica: Tecnologia da deformação plástica. Escolar Editora, Lisboa

Röthlingshöfer T (2012) Auslegungsmethodik zur Optimierung des Einsatzverhaltens von Beveloidverzahnungen. Dissertation, RWTH Aachen

Rowan OK, Sisson RD (2009) Effect of alloy composition on carburizing performance of steel. J Phase Equilib Diffus 30(3):235–241. doi:10.1007/s11669-009-9500-7 CrossRef

Rudnizki J, Zeislmair B, Prahl U, Bleck W (2010) Prediction of abnormal grain growth during high temperature treatment. Comput Mater Sci 49(2):209–216. doi:10.1016/j.commatsci.2010.04.015 CrossRef

Sanchez-Palencia E (1983) Homogenization method for the study of composite media. In: Verhulst F (ed) Asymptotic analysis II, vol 985. Springer, Berlin, pp 192–214CrossRef

Santillana MB (2013) Thermo-mechanical properties and cracking during solidification of thin slab cast steel. Delft University of Technology, Delft

Sawatari C, Matsuo M (1986) Elastic modulus of isotactic polypropylene in the crystal chain direction as measured by X-ray diffraction. Macromolecules 19(10):2653–2656. doi:10.1021/ma00164a036 CrossRef

Schifferl H, Zamberger S, Jöller A (2012) Cost optimization by the modification of ally additions of heat-treatable engineering steels. HTM 67(4):251–256. doi:10.3139/105.110160 CrossRef

Schmidt I, Thies H (1989) Ingenieur-Werkstoffe 1(3/4):62–66

Schmitz GJ, Benke S, Laschet G, Apel M, Prahl U, Fayek P, Konovalov S, Rudnizki J, Quade H, Freyberger S, Henke T, Bambach M, Rossiter EA, Jansen U, Eppelt U (2011) Towards integrative computational materials engineering of steel components. Prod Eng Res Devel 5(4):373–382. doi:10.1007/s11740-011-0322-1 CrossRef

Schmitz GJ, Prahl U (eds) (2012) Integrative computational materials engineering. Wiley-VCH Verlag GmbH & Co, KGaA, Weinheim, Germany

Schmitz GJ et al (2015) Software solutions for ICME. JOM, 1–7

Schmoeckel D, Hemyari D (1998) The realization of warm forging’s full potential. In: International conference on forging and related technology (ICFT’98), Birmingham, UK, 27–28 April 1998. Professional Engineering Publishing Limited, Bury St Edmonds, pp 295–310

Schmoeckel D, Sheljaskow D (1994) Die Situation der Werkzeugwerkstoffe für die Halbwarmumformung in Deutschland, Darmstadt

Schwerdtfeger K (1993) Metallurgie des Stranggießens. Verlag Stahleisen GmbH

Scoonover TM, Arnson HL (1984) Hardenability of low- and medium-carbon Mn-Cr-Ni-Mo steels. J Heat Treat 3(3):183–192. doi:10.1007/BF02833260 CrossRef

Sellars CM, McTegart WJ (1966) On the mechanism of hot deformation. Acta Metall 14(9):1136–1138. doi:10.1016/0001-6160(66)90207-0 CrossRef

Spekowius M, Spina R, Hopmann C (2015) Mesoscale simulation of the solidification process in injection moulded parts. J Polym Eng. doi:10.1515/polyeng-2014-0223

Spina R, Spekowius M, Dahlmann R, Hopmann C (2014) Analysis of polymer crystallization and residual stresses in injection molded parts. Int J Precis Eng Manuf 15(1):89–96. doi:10.1007/s12541-013-0309-2 CrossRef

Spina R, Spekowius M, Küsters K, Hopmann C (2013) Thermal simulation of polymer crystallization during post-filling. KEM 554–557:1699–1706. doi:10.4028/www.scientific.net/KEM.554-557.1699 CrossRef

Tartaglia JM, Eldis GT, Geissler JJ (1986) Hyperbolic secant method for predicting Jominy hardenability: an example using 0.2C-Ni-Cr-Mo steels. J Heat Treat 4(4):352–364. doi:10.1007/BF02833091

Tashiro K, Kobayashi M (1996) Molecular theoretical study of the intimate relationships between structure and mechanical properties of polymer crystals. Polymer 37(10):1775–1786. doi:10.1016/0032-3861(96)87293-4 CrossRef

Tashiro K, Kobayashi M, Tadokoro H (1992) Vibrational spectra and theoretical three-dimensional elastic constants of isotactic polypropylene crystal. An important role of anharmonic vibrations. Polym J 24(9):899–916. doi:10.1295/polymj.24.899 CrossRef

Tobie T (2001) Zur Grübchen- und Zahnfußtragfähigkeit einsatzgehärteter Zahnräder: Einflüsse aus Einsatzhärtungstiefe, Wärmebehandlung und Fertigung bei unterschiedlicher Baugröße. FZG, Lehrstuhl für Maschinenelemente, Forschungsstelle für Zahnräder und Getriebebau

Tragfähigkeitsberechnung von Stirnrädern (DIN 3990)

Tragfähigkeitsberechnung von Kegelrädern ohne Achsversatz (DIN 3991)

Weibull W (1959) Zur Abhängigkeit der Festigkeit von der Probengröße. Ing Arch 28(1):360–362. doi:10.1007/BF00536130 CrossRefMATH

Wienke S, Spekowius M, Dammer A, Da Mey, Hopmann C, Muller MS (2014) Towards an accurate simulation of the crystallisation process in injection moulded plastic components by hybrid parallelisation. Int J High Perform Comput Appl 28(3):356–367. doi:10.1177/1094342013511837 CrossRef

Wirth C (2009) Zur Tragfähigkeit von Kegelrad- und Hypoidgetrieben. Berichte aus dem Maschinenbau, vol 164. Shaker, Aachen

Zheng R, Tanner RI, Wo DL, Fan X, Hadinata C, Costa FS, Kennedy PK, Zhu P, Edward G (2010) Modeling of flow-induced crystallization of colored polypropylene in injection molding. Korea-Aust Rheol J 22(3):151–162

Zuber D (2008) Fusstragfähigkeit einsatzgehärteter Zahnräder unter Berücksichtigung lokaler Materialeigenschaften. Berichte aus der Produktionstechnik, vol 12. Shaker, Aachen

Zuidema H, Peters GWM, Meijer HEH (2001) Development and validation of a recoverable strain-based model for flow-induced crystallization of polymers. Macromol Theory Simul 10(5):447–460. doi:10.1002/1521-3919(20010601)10:5<447:AID-MATS447>3.0.CO;2-C CrossRef

Title: Integrated Computational Materials and Production Engineering (ICMPE)
Authors: Wolfgang Bleck
Christian Brecher
Michael Herty
Gerhard Hirt
Christian Hopmann
Fritz Klocke
Nikolai Borchmann
Jens Dierdorf
Hamidreza Farivar
Patrick Fayek
Axel Häck
Viktor Kripak
Markus Krömer
Gottfried Laschet
Ulrich Prahl
Markus Rüngeler
Georg J. Schmitz
Marcel Spekowius
Phillip Springer
Andre M. Teixeira
Publisher: Springer International Publishing
Book: Integrative Production Technology
Print ISBN: 978-3-319-47451-9

Electronic ISBN: 978-3-319-47452-6

Copyright Year: 2017
DOI: https://doi.org/10.1007/978-3-319-47452-6_5

Springer Professional

Abstract

Please log in to get access to your license.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Wirtschaft"

Springer Professional "Technik"