Top

The International Journal of Advanced Manufacturing Technology

Published in:

05-07-2021 | ORIGINAL ARTICLE

Investigation on machinability of NiTi shape memory alloys under different cooling conditions

Authors: Yanzhe Zhao, Kai Guo, Jianfeng Li, Jie Sun

Published in: The International Journal of Advanced Manufacturing Technology | Issue 5-6/2021

Activate our intelligent search to find suitable subject content or patents.

search-config

AI-assisted search

Off

Abstract

NiTi shape memory alloy products are becoming more and more popular in many areas. But owing to the unique characteristics of NiTi shape memory alloys, it is still considered restrictive by the traditional machining methods of producing NiTi shape memory alloys for finished products. Flood coolant and cryogenic with liquid nitrogen (LN₂)–assisted machining is desired to improve machinability of material in the turning procedure. Experiments were conducted to examine the influence of cooling conditions (dry, flood, and cryogenic LN₂) on turning NiTi shape memory alloys at different cutting speeds. Tool wear, cutting force, and surface integrity were selected as evaluation characteristics to explore the effects of different cooling methods and the stress-induced martensitic phase during the turning process. The study shows that the appearance of the stress-induced martensitic phase during the turning process harms the machinability of NiTi shape memory alloys. Flood conditions accomplish lower tool wear and cutting force at 15 m/min. Cryogenic conditions achieve higher machinability at 125 m/min.

previous article Autonomous 3D geometry reconstruction through robot-manipulated optical sensors

next article Effect of yield criterion and variable elastic modulus on springback prediction of Ti-6Al-4V sheet V-shaped bending

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

inform now

Kowalczyk M (2018) Temperature distribution in the machining zone during precise turning of NiTi alloy. Proc SPIE 10808. https://doi.org/10.1117/12.2501494

Kowalczyk M (2017) Application of Taguchi method to optimization of surface roughness during precise turning of NiTi shape memory alloy. Photonics Appl Astron Commun Ind High Energy Phys Exp 2017 10445:104455Ghttps://doi.org/10.1117/12.2281062

Bayati P, Safaei K, Nematollahi M, Ahmadreza J, Yadollahi A, Mahtabi M, Elahinia M (2021) Toward understanding the effect of remelting on the additively manufactured NiTi. Int J Adv Manuf Technol 112:347–360. https://doi.org/10.1007/s00170-020-06378-4CrossRef

Lin HC, Lin KM, Chen YC (1999) The laser machining characteristics of TiNi shape memory alloys. High Temp Mater Process 3:409–420

Kaya E, Kaya İ (2019) A review on machining of NiTi shape memory alloys: the process and post process perspective. Int J Adv Manuf Technol 100:2045–2087. https://doi.org/10.1007/s00170-018-2818-8CrossRef

Debnath S, Reddy MM, Yi QS (2014) Environmental friendly cutting fluids and cooling techniques in machining: a review. J Clean Prod 83:33–47. https://doi.org/10.1016/j.jclepro.2014.07.071CrossRef

Ezugwu EO (2005) Key improvements in the machining of difficult-to-cut aerospace superalloys. Int J Mach Tools Manuf 45:1353–1367CrossRef

Kaynak Y, Karaca HE, Noebe RD, Jawahir IS (2013) Tool-wear analysis in cryogenic machining of NiTi shape memory alloys: a comparison of tool-wear performance with dry and MQL machining. Wear 306:51–63. https://doi.org/10.1016/j.wear.2013.05.011CrossRef

Wu SK, Lin HC, Chen CC (1999) Study on the machinability of a Ti49.6Ni50.4 shape memory alloy. Mater Lett 40:27–32. https://doi.org/10.1016/S0167-577X(99)00044-0CrossRef

10.

Biermann D, Kahleyss F, Surmann T (2009) Micromilling of NiTi shape-memory alloys with ball nose cutters. Mater Manuf Process 24:1266–1273

11.

Guo Y, Klink A, Fu C, Snyder J (2013) Machinability and surface integrity of Nitinol shape memory alloy. CIRP Ann Manuf Technol 62:83–86. https://doi.org/10.1016/j.cirp.2013.03.004CrossRef

12.

Weinert K, Petzoldt V, Kötter D (2004) Turning and drilling of NiTi shape memory alloys. CIRP Ann - Manuf Technol 53:65–68. https://doi.org/10.1016/S0007-8506(07)60646-5CrossRef

13.

Kuppuswamy R, Yui A (2017) High-speed micromachining characteristics for the NiTi shape memory alloys. Int J Adv Manuf Technol 93:11–21. https://doi.org/10.1007/s00170-015-7598-9CrossRef

14.

Biermann D, Kahleyss F, Krebs E, Upmeier T (2011) A study on micro-machining technology for the machining of NiTi: five-axis micro-milling and micro deep-hole drilling. J Mater Eng Perform 20:745–751. https://doi.org/10.1007/s11665-010-9796-9CrossRef

15.

Wang G, Liu Z, Ai X, Huang W, Niu J (2018) Effect of cutting parameters on strain hardening of nickel-titanium shape memory alloy. Smart Mater Struct 27:075027. https://doi.org/10.1088/1361-665X/aac43dCrossRef

16.

Weinert K, Petzoldt V (2004) Machining of NiTi based shape memory alloys. Mater Sci Eng A 378:180–184. https://doi.org/10.1016/j.msea.2003.10.344CrossRef

17.

Kaynak Y, Robertson SW, Karaca HE, Jawahir IS (2015) Progressive tool-wear in machining of room-temperature austenitic NiTi alloys: the influence of cooling/lubricating, melting, and heat treatment conditions. J Mater Process Technol 215:95–104. https://doi.org/10.1016/j.jmatprotec.2014.07.015CrossRef

18.

Zailani ZA, Mativenga PT (2016) Effects of chilled air on machinability of NiTi shape memory alloy. Procedia CIRP 45:207–210. https://doi.org/10.1016/j.procir.2016.02.156CrossRef

19.

Rosnan R, Murad MN, Azmi AI, Shyha I (2019) Effects of minimal quantity lubricants reinforced with nano-particles on the performance of carbide drills for drilling nickel-titanium alloys. Tribol Int 136:58–66. https://doi.org/10.1016/j.triboint.2019.03.029CrossRef

20.

Mehrpouya M, Shahedin AM, Daood Salman Dawood S, Kamal Ariffin A (2017) An investigation on the optimum machinability of NiTi based shape memory alloy. Mater Manuf Process 32:1497–1504. https://doi.org/10.1080/10426914.2017.1279290CrossRef

21.

Yang H, Sakai K, Shizuka H, Kurebayashi Y, Hayakawa K (2021) Nagare T (2021) Experimental investigation of the effects of super-elasticity on the machinability of NiTi alloys. Int J Adv Manuf Technol 115:581–593. https://doi.org/10.1007/s00170-021-07166-4CrossRef

22.

Mohd Khalil AN, Azmi AI, Murad MN, Mahboob Ali MA (2018) The effect of cutting parameters on cutting force and tool wear in machining nickel titanium shape memory alloy ASTM F2063 under minimum quantity nanolubricant. Procedia CIRP 77:227–230. https://doi.org/10.1016/j.procir.2018.09.002CrossRef

23.

Kaynak Y (2014) Machining and phase transformation response of room-temperature austenitic NiTi shape memory alloy. J Mater Eng Perform 23:3354–3360. https://doi.org/10.1007/s11665-014-1058-9CrossRef

24.

A.R.C. S, J.I. H, K. R (2006) An analysis of the residual stresses generated in Inconel 718™ when turning. J Mater Process Technol 173:359–367

25.

Pereira WH, Delijaicov S (2019) Surface integrity of INCONEL 718 turned under cryogenic conditions at high cutting speeds. Int J Adv Manuf Technol 104:2163–2177CrossRef

26.

Pusavec F, Deshpande A, Shu Y, M’Saoubi R, Jawahir IS (2015) Sustainable machining of high temperature Nickel alloy - Inconel 718: part 2 - chip breakability and optimization. J Clean Prod 87:941–952CrossRef

27.

Madariaga A, Esnaola JA, Fernandez E, Arrazola PJ, Garay A, Morel F (2014) Analysis of residual stress and work-hardened profiles on Inconel 718 when face turning with large-nose radius tools. Int J Adv Manuf Technol 71:1587–1598CrossRef

28.

Kaynak Y, Karaca HE, Noebe RD, Jawahir IS (2015) The effect of active phase of the work material on machining performance of a NiTi shape memory alloy. Metall Mater Trans A Phys Metall Mater Sci 46:2625–2636. https://doi.org/10.1007/s11661-015-2828-1CrossRef

29.

Chaabani S, Arrazola PJ, Ayed Y, Madariaga A, Tidu A, Germain G (2020) Comparison between cryogenic coolants effect on tool wear and surface integrity in finishing turning of Inconel 718. J Mater Process Technol 285:116780. https://doi.org/10.1016/j.jmatprotec.2020.116780CrossRef

30.

Sivaiah P, Chakradhar D (2017) Influence of cryogenic coolant on turning performance characteristics: a comparison with wet machining. Mater Manuf Process 32:1475–1485CrossRef

31.

Benafan O, Noebe RD, Padula SA, Gaydosh DJ, Lerch BA, Garg A, Bigelow GS, An K, Vaidyanathan R (2013) Temperature-dependent behavior of a polycrystalline NiTi shape memory alloy around the transformation regime. Scr Mater 68:571–574. https://doi.org/10.1016/j.scriptamat.2012.11.042CrossRef

32.

Benafan O, Noebe RD, Padula SA, Garg A, Clausen B, Vogel S, Vaidyanathan R (2013) Temperature dependent deformation of the B2 austenite phase of a NiTi shape memory alloy. Int J Plast 51:103–121. https://doi.org/10.1016/j.ijplas.2013.06.003CrossRef

33.

Sivalingam V, Sun J, Yang B, Liu K, Ramesh RC (2018) Machining performance and tool wear analysis on cryogenic treated insert during end milling of Ti-6Al-4V alloy. J Manuf Process 36:188–196. https://doi.org/10.1016/j.jmapro.2018.10.010CrossRef

34.

Zhao Y, Li J, Guo K, Sivalingam V, Sun J (2020) Study on chip formation characteristics in turning NiTi shape memory alloys. J Manuf Process 58:787–795. https://doi.org/10.1016/j.jmapro.2020.08.072CrossRef

35.

Zhao YZ, Guo K, Sivalingam V, Li JF, Sun QD, Zhu ZJ, Sun J (2021) Surface integrity evolution of machined NiTi shape memory alloys after turning process. Adv Manuf. https://doi.org/10.1007/s40436-020-00330-1

36.

Thakur A, Gangopadhyay S (2016) State-of-the-art in surface integrity in machining of nickel-based super alloys. Int J Mach Tools Manuf 100:25–54. https://doi.org/10.1016/j.ijmachtools.2015.10.001CrossRef

37.

Kaynak Y, Huang B, Karaca HE, Jawahir IS (2017) Surface characteristics of machined NiTi shape memory alloy: the effects of cryogenic cooling and preheating conditions. J Mater Eng Perform 26:3597–3606. https://doi.org/10.1007/s11665-017-2791-7CrossRef

Title: Investigation on machinability of NiTi shape memory alloys under different cooling conditions
Authors: Yanzhe Zhao
Kai Guo
Jianfeng Li
Jie Sun
Publication date: 05-07-2021
Publisher: Springer London
Published in: The International Journal of Advanced Manufacturing Technology / Issue 5-6/2021
Print ISSN: 0268-3768
Electronic ISSN: 1433-3015
DOI: https://doi.org/10.1007/s00170-021-07563-9

Springer Professional

Abstract

Please log in to get access to your license.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Other articles of this Issue 5-6/2021

Optimization of CVC shifting mode for hot strip mill based on the proposed LightGBM prediction model of roll shifting

Vortex formation mechanism and experimental research of abrasive flow precision machining special inner curved surface based on large eddy simulation

New drawbead tester and numerical analysis of drawbead closure force

Investigation of surface quality in Cost of Goods Manufactured (COGM) method of μ-Al2O3 Powder-Mixed-EDM process on machining of Ti-6Al-4V

Decision-making in a fast fashion company in the Industry 4.0 era: a Digital Twin proposal to support operational planning

Study of surfactant effects on intermolecular forces (IMF) in powder-mixed electrical discharge machining (EDM) of Ti-6Al-4V

Premium Partners