Top

International Journal of Steel Structures

Published in:

30-10-2019

Investigation on the Collapse Behavior of Diagonal Stiffened Composite Plate Girders Subjected to Shear Loading

Authors: Aliakbar Hayatdavoodi, Mohammad Nazari, Alireza Javadi Pordesari

Published in: International Journal of Steel Structures | Issue 2/2020

Activate our intelligent search to find suitable subject content or patents.

search-config

AI-assisted search

Off

Abstract

In this study, a new analytical method is presented to estimate the shear capacity of diagonally stiffened steel–concrete composite plate girders. This method is formulated based on tension field action in steel girder web and failure mechanism of concrete slab deck. To validate the accuracy of the proposed method, the obtained results are compared with three-dimensional finite element analysis of composite plate girders with different configuration of stiffeners. The results of analytical and numerical investigations indicate that the proposed method can accurately estimate the ultimate shear capacity of composite plate girders. In addition, it is shown that the diagonal stiffeners on one hand can reduce the buckling effects of shear panel of girders and on the other hand can increase the strength of elastic shear buckling and ultimate shear capacity of girders well in comparison with the unstiffened thin steel plate girders.

previous article Cyclic Behaviour of Fully-Rigid and Semi-Rigid Steel Beam-to-Column Connections

next article Experimental Study on Load-Bearing Capacities of Frame-Type Scaffolds Used in Precast Construction

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

inform now

AISC. (2005). Seismic provisions for structural steel buildings. In ANSI/AISC 341–05. Chicago: American Institute of Steel Construction, Inc.

Alinia, M. M., Shakiba, M., & Habashi, H. R. (2009). Shear failure characteristics of steel plate girders. Thin-Walled Structures,47, 1498–1506.CrossRef

Manual, ANSYS Verification. (2009). Release 12.0. ANSYS, Inc.

Baskar, K., & Shanmugam, N. E. (2003). Steel–concrete composite plate girders subject to combined shear and bending. Journal of Constructional Steel Research,59, 531–557.CrossRef

Basler, K. (1961). Strength of plate girders in shear. Journal of the Structural Division,87(7), 151–180.

Basler, K. (1963a). Strength of plate girders in shear. Proceedings ASCE,128, 683.

Basler, K. (1963b). Strength of plate girders under combined bending and shearr. Proceedings ASCE,128, 720.

Basler, K. & Thtirlimann, B. (1960a). Buckling tests on plate girders. In IABSE 6th Congress, Prelim, Publ, 17.

Basler, K., & Thtirlimann, B. (1960b). Carrying capacity of plate girders. In IABSE 6th Congress, Prelim, Publ, 16.

Basler, K. & Thurlimann, B. (1961). Strength of plate girders in bending. In Proceedings ASCE, 87 (ST6), (August 1961), reprint no. 185 (61-12).

Basler, K., Yen, B. T., Mueller, J. A., & Thiirlimann, B. (1960c). WebBuckling tests on welded plate girders. In Welding research council bulletin no. 64, Sept.

Chern, C., & Ostapenko, A. (1969). Ultimate strength of plate girders under shear. Fritz engineering laboratory report. no. 328.7. Bethlehem, PA, USA: Lehigh University.

Cooper, P. B., Lew, H. S., & Yen, B. T. (1964). Welded constructional alloy steel plate girders. Journal of the Structural Division,90(1), 1–36.

Darehshouri, S. F., Shanmugam, N. E., & Osman, S. A. (2011). Collapse behavior of composite plate girders loaded in shear. Journal of Structural Engineering,138, 318–326.CrossRef

Hayatdavoodi, A., & Shanmugam, N. E. (2015). Web buckling and ultimate strength of composite plate girders subjected to shear and bending. International Journal of Structural Stability and Dynamics,15, 1450047.MathSciNetCrossRef

Lee, S. C., & Yoo, C. H. (1999). Experimental study on ultimate shear strength of web panels. Journal of Structural Engineering,125, 838–846.CrossRef

Lezgy-Nazargah, M., Vidal, P., & Polit, O. (2019). A sinus shear deformation model for static analysis of composite steel-concrete beams and twin-girder decks including shear lag and interfacial slip effects. Thin-Walled Structures,134, 61–70.CrossRef

Moon, J., Yi, J., Choi, B. H., & Lee, H.-E. (2009). Shear strength and design of trapezoidally corrugated steel webs. Journal of Constructional Steel Research,65, 1198–1205.CrossRef

Narayanan, R., Al-Amery, R. I. M., & Roberts, T. M. (1989). Shear strength of composite plate girders with rectangular web cut-outs. Journal of Constructional Steel Research,12, 151–166.CrossRef

Porter, D. M. (1975). The collapse behavior of plate girders loaded in shear. The Structural Engineer,53(8), 313–325.

Porter, D. M., & Cherif, Z. E. (1987). Ultimate shear strength of thin webbed steel and concrete composite girders (pp. 55–64). Amsterdam: Elsevier Applied Science Publishers.

Queiroz, F. D., Vellasco, P. C. G. S., & Nethercot, D. A. (2007). Finite element modelling of composite beams with full and partial shear connection. Journal of Constructional Steel Research,63, 505–521.CrossRef

Roberts, T. M., & Al-Amery, R. I. M. (1991). Shear strength of composite plate girders with web cutouts. Journal of Structural Engineering,117, 1897–1910.CrossRef

Song, A., Wan, S., Jiang, Z., & Jie, X. (2018). Residual deflection analysis in negative moment regions of steel-concrete composite beams under fatigue loading. Construction and Building Materials,158, 50–60.CrossRef

Timoshenko, S. P., & Gere, J. M. (1961). Theory of elastic stability (2nd ed.). New York: McGraw-Hill.

Wagner, H. (1931). Flat sheet metal girder with very thin metal web: Part 1: General theories and assumptions. Washington, DC: National Advisory Committee for Aeronautics.

White, D. W., & Barker, M. G. (2008). Shear resistance of transversely stiffened steel I-girders. Journal of Structural Engineering,134, 1425–1436.CrossRef

Wilson, J. M. (1886). On specifications for strength of iron bridges. Transactions of the American Society of Civil Engineers,15(1), 389–414.

Yonezawa, H., Mikami, I., Dogaki, M., & Uno, H. (1978). Shear strength of plate girders with diagonally stiffened webs. In Proceedings of the Japan society of civil engineers (Vol. 1978, No. 269, pp. 17–27). Japan Society of Civil Engineers.

Zhu, Y., & Zhao, J. (2017). Experimental and analytical studies on bearing capacity of bolt connected composite plate girders. International Journal of Steel Structures,17, 1317–1329.CrossRef

Title: Investigation on the Collapse Behavior of Diagonal Stiffened Composite Plate Girders Subjected to Shear Loading
Authors: Aliakbar Hayatdavoodi
Mohammad Nazari
Alireza Javadi Pordesari
Publication date: 30-10-2019
Publisher: Korean Society of Steel Construction
Published in: International Journal of Steel Structures / Issue 2/2020
Print ISSN: 1598-2351
Electronic ISSN: 2093-6311
DOI: https://doi.org/10.1007/s13296-019-00291-7

Springer Professional

Abstract

Please log in to get access to your license.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Other articles of this Issue 2/2020

Experimental and Analytical Behavior of Square CFDST Column Blind Bolted to Steel Beam Connections

Research on the Judgement Method for Catenary Action of Restrained Steel Beams in Fire

Stress Redistribution of Headed Stud Connectors Subjected to Constant Shear Force

Pseudo-plastic Collapse Performance of Multi-span Continuous Beams with CFS Sigma Sections: A Numerical Study

Analysis of Shear Connector of Steel–Concrete Composite Box-Girder Bridge Considering Interfacial Bonding and Friction

Presenting a New Detail for the Rigid Connection Between I-Shaped Beam and Concrete-Filled Steel Tube Column with Stiffened Channel Link

Premium Partners