Top

The International Journal of Advanced Manufacturing Technology

Published in:

29-06-2021 | ORIGINAL ARTICLE

Investigation on the electrochemical assisted magnetic abrasive finishing for a stainless steel of SUS304

Authors: Xu Sun, Yongjian Fu, Wei Lu, Wei Hang

Published in: The International Journal of Advanced Manufacturing Technology | Issue 5-6/2021

Activate our intelligent search to find suitable subject content or patents.

search-config

AI-assisted search

Off

Abstract

In order to obtain a high accuracy with high machining efficiency for finishing hard alloy metal material, we proposed a hybrid finishing method which is electrochemical (ECM) effects assisted magnetic abrasive finishing (MAF). In this study, the electrochemical magnetic abrasive finishing (EMAF process) was divided into EMAF stage and MAF stage. The metal surface can be easily finished with the passive films formed in electrochemical reactions. Simultaneously, the passive films can be removed by frictional action between magnetic brush and workpiece surface. Thus, the essence of EMAF process is to form and remove the passive films on the workpiece surface. This study focused on investigating the finishing mechanism and finishing characteristics of EMAF process. Compared with traditional MAF process, it can be confirmed that the finishing efficiency is remarkably improved more than 75% by EMAF process, and the surface roughness is also lower in EMAF process. The optimal experimental result of EMAF process showed that the surface roughness was reduced to less than 30 nm from the original surface roughness 178 nm after 4 min in EMAF stage, and the surface roughness was finally reduced to 20 nm after 10 min in MAF stage. The material removal rate in hybrid finishing stage was nearly 7 times than that in MAF stage. Additionally, the effective finishing area in EMAF process was about 70% of that in MAF process.

previous article Correction to: Optimization of CVC shifting mode for hot strip mill based on the proposed LightGBM prediction model of roll shifting

next article Using 3D printing and femtosecond laser micromachining to fabricate biodegradable peripheral vascular stents with high structural uniformity and dimensional precision

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

inform now

Z.Y. Z, S.L. H, S.C. W, B. W, Q. B, B. Z, R.K. K, D.M. G (2017) A novel approach of high-performance grinding using developed diamond wheels. Int J Adv Manuf Technol 91:3315–3326CrossRef

Z.Y. Z, J.F. C, B. W, Z.G. W, R.K. K, D.M. G (2017) A novel approach of mechanical chemical grinding. J Alloys Compd 726:514–524CrossRef

B. W, Z.Y. Z, K.K. C, J.F. C, A. R, J.H. Y, C.T. L, G.X. C, K.T. Z, J. L, N. J, D.M. G (2018) New Deformation-Induced Nanostructure in Silicon. Nano Lett 18:4611–4617CrossRef

Zhang ZY, Huo YX, Guo DM (2013) A model for nanogrinding based on direct evidence of ground chips of silicon wafers. Sci China Technol Sci 56(9):2099–2108CrossRef

Zhang ZY, Huo FW, Zhang XZ, Guo DM (2012) Fabrication and size prediction of crystalline nanoparticles of silicon induced by nanogrinding with ultrafine diamond grits. Scr Mater 67(7-8):657–660CrossRef

Shinmura T, Takazawa K, Hatano E, Matsunaga M (1990) Study on Magnetic Abrasive Finishing. CIRP Ann Manuf Technol 39:325–328CrossRef

Mori T, Hirota K, Kawashima Y (2003) Clarification of magnetic abrasive finishing mechanism. J Mater Process Technol 143:682–686CrossRef

Singh DK, Jain VK, Raghuram V, Komanduri R (2005) Analysis of surface texture generated by a flexible magnetic abrasive brush. Wear 259:1254–1261CrossRef

Baron YM, Ko SL, Park J (2005) Characterization of the Magnetic Abrasive Finishing Method and Its Application to Deburring. Key Eng Mater 524:291–296CrossRef

10.

Park J, Ko SL, Baron YM (2005) Effective Deburring of Micro Burr using Magnetic Abrasive Finishing. J Korean Soc Precis Eng 22:7–13

11.

Yamaguchi H, Shinmura T (1999) Study of the surface modification resulting from an internal magnetic abrasive finishing process. Wear 225:246–255CrossRef

12.

Wang Y, Hu DJ (2005) Study on the inner surface finishing of tubing by magnetic abrasive finishing. Int J Mach Tools Manuf 45:43–49CrossRef

13.

Girma B, Joshi SS, Raghuram MVGS, Balasubramaniam R (2006) AN EXPERIMENTAL ANALYSIS OF MAGNETIC ABRASIVES FINISHING OF PLANE SURFACES. Mach Sci Technol 10:323–340CrossRef

14.

YAMAGUCHI H, SHINMURA T, KOBAYASHI A (2001) Development of an Internal Magnetic Abrasive Finishing Process for Nonferromagnetic Complex Shaped Tubes. JSME INT J C-MECH SY 44:275–281

15.

Ching TL, Lieh DY, Han MC (2007) Study of magnetic abrasive finishing in free-form surface operations using the Taguchi method. Int J Adv Manuf Technol 34:122–130CrossRef

16.

Zhang MD, Lv M, Chen HL (2009) Theoretical Research on Polishing Free-Form Surface with Magnetic Abrasive Finishing. Key Eng Mater 760:404–408

17.

Hou ZB, Komanduri R (1998) Magnetic Field Assisted Finishing of Ceramics—Part III: On the Thermal Aspects of Magnetic Abrasive Finishing (MAF) of Ceramic Rollers. J Tribol 120:660–667CrossRef

18.

Lieh DY, Ching TL, Han MC (2009) Optimization in MAF operations using Taguchi parameter design for AISI304 stainless steel. Int J Adv Manuf Technol 42:595–605CrossRef

19.

Ma Y, Huang XW, Hang W, Liu M, Song YX, Yuan JL, Zhang TH (2020) Nanoindentation size effect on stochastic behavior of incipient plasticity in a LiTaO₃ single crystal. Eng Fract Mech 226:106877CrossRef

20.

Farzad P, Abdolreza R (2015) Nano-finishing of BK7 optical glass using magnetic abrasive finishing process. Appl Opt 54:2199–2207CrossRef

21.

Yin SH, Shinmura T (2004) Vertical vibration-assisted magnetic abrasive finishing and deburring for magnesium alloy. Int J Mach Tools Manuf 44:1297–1303CrossRef

22.

Sihag N, Kala P, Pandey PM (2015) Experimental investigations of chemo-ultrasonic assisted magnetic abrasive finishing process. Int J Precis Technol 5:246–260CrossRef

23.

Yin SH, Wang Y, Huang H, Zhu YJ, Fan YF, Chen Y (2009) Effects of Horizontal Vibration Assistance on Surface Roughness in Magnetic Abrasive Finishing. Adv Mater Res 849:246–251CrossRef

24.

Mulik RS, Pandey PM (2010) Ultrasonic assisted magnetic abrasive finishing of hardened AISI 52100 steel using unbonded SiC abrasives. Int J Refract Met Hard Mater 29:68–77CrossRef

25.

Zou YH, Xie HJ, Dong CW, Wu JZ (2018) Study on complex micro surface finishing of alumina ceramic by the magnetic abrasive finishing process using alternating magnetic field. Int J Adv Manuf Technol 97:2193–2202CrossRef

26.

Yan BH, Chang GW, Cheng TJ, Hsu RT (2003) Electrolytic magnetic abrasive finishing. J Mach Tools Manuf 43:1355–1366CrossRef

27.

Sun X, Zou YH (2017) Development of magnetic abrasive finishing combined with electrolytic process for finishing SUS304 stainless steel plane. Int J Adv Manuf Technol 92:3373–3384CrossRef

28.

Sun X, Zou YH (2019) Study on magnetic abrasive finishing combined with electrolytic process. Int J Abras Technol 9:129–137CrossRef

29.

Ridha MM, Zou YH, Sugiyama HS (2015) Development of a new internal finishing of tube by magnetic abrasive finishing process combined with electrochemical machining. J Mech Eng Appl 3:22–29

30.

Zou YH, Xing BJ, Sun X (2020) Study on the magnetic abrasive finishing combined with electrolytic process—investigation of machining mechanism. Int J Adv Manuf Technol 108:1675–1689CrossRef

31.

Sun X, Zou YH (2018) Study on electrolytic magnetic abrasive finishing stainless steel sus304 plane with a special compound machining tool.JMMP 2:41–53

32.

Kimoto YO (1994) Ultra-precision machining by electrolytic complex method. Tokyo: aipishi:111–116 (In Japanese)

33.

Kumar AM, Sudhagar P, Ramakrishna S, Kang YS, Kim H, Gasem ZM, Rajendran N (2014) Evaluation of chemically modified Ti–5Mo–3Fe alloy surface: Electrochemical aspects and in vitro bioactivity on MG63 cells. Appl Surf Sci 307:52–61CrossRef

34.

Utkua FS, Seckinb E, Gollerb G, Tamerlerc C, Urgen M (2015) Electrochemically designed interfaces: Hydroxyapatite coated macro-mesoporous titania surfaces. Appl Surf Sci 350:62–68CrossRef

35.

Zhang HZ, Shi XG, Tian A, Wang L, Liu CW (2018) Electrochemical properties of Ti3+ doped Ag-Ti nanotube arrays coated with hydroxyapatite. Appl Surf Sci 436:579–584CrossRef

36.

Kamakoti V, Shanmugam NR, Tanak AS, Jagannath B, Prasad S (2018) Investigation of molybdenum-crosslinker interfaces for affinity based electrochemical biosensing applications. Appl Surf Sci 436:441–450CrossRef

37.

Fan KN, Jin ZJ, Guo J, Wang ZB, Jiang GN (2019) Investigation on the surface layer formed during electrochemical modification of pure iron. Appl Surf Sci 466:466–471CrossRef

Title: Investigation on the electrochemical assisted magnetic abrasive finishing for a stainless steel of SUS304
Authors: Xu Sun
Yongjian Fu
Wei Lu
Wei Hang
Publication date: 29-06-2021
Publisher: Springer London
Published in: The International Journal of Advanced Manufacturing Technology / Issue 5-6/2021
Print ISSN: 0268-3768
Electronic ISSN: 1433-3015
DOI: https://doi.org/10.1007/s00170-021-07529-x

Springer Professional

Abstract

Please log in to get access to your license.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Other articles of this Issue 5-6/2021

Operational vibration of a waterjet focuser as means for monitoring its wear progression

Mechanical performance and microstructure of near-unthinned die-less spinning using ball-crown-shape roller

A novel polishing technology for leading and trailing edges of aero-engine blade

Remanufacturing of recycled carbon fiber-reinforced composites based on fused deposition modeling processes

Vortex formation mechanism and experimental research of abrasive flow precision machining special inner curved surface based on large eddy simulation

Residual stress investigation of quenched and artificially aged aluminum alloy 7175

Premium Partners