Issue 17/2003
Content (25 Articles)
Keyword contents
Morphological, mechanical and rheological properties of nylon 6/acrylonitrile-butadiene- styrene blends compatibilized with MMA/MA copolymers
E. M. Araújo, E. Hage Jr, A. J. F. Carvalho
Impedance spectroscopy in reinforced concrete: Experimental procedure for monitoring steel corrosion Part II Polarization effect
O. Poupard, A. Aït-Mokhtar, P. Dumargue
Influence of the starting condition on the kinetics of sensitization and loss of toughness in an AISI 304 steel
S. S. M. Tavares, M. P. Cindra Fonseca, Alex Maia, Pedro de Lima-Neto
The load transfer effect in the true threshold creep behaviour of an Al-8.5Fe-1.3V-1.7Si alloy reinforced with alumina short fibres
K. Kuchařová, J. Čadek, S. J. Zhu
Properties of binary TiO2-SiO2 composite particles with various structures prepared by vapor phase hydrolysis
Byoung-Soo Lee, Dong-Jun Kang, Sun-Geon Kim
Mechanistic investigation of the field-activated combustion synthesis (FACS) of tungsten carbide with or without nickel additive
Guojian Jiang, Hanrui Zhuang, Wenlan Li
Co-continuous Al/Al2O3 composite produced by liquid displacement reaction: Relationship between microstructure and mechanical behavior
G. M. La Vecchia, C. Badini, D. Puppo, F. D'Errico
Effects of Gravitational orientation on the microstructural evolution of gas tungsten arc welds in an Al-4 wt% Cu alloy
N. Kang, J. Singh, A. K. Kulkarni
Semisolid forming of Al-10mass%Mg alloy by blending of elemental powders
K. Yasue, A. Radjai, K. Miwa, Y. Sakaguchi
Characterization of the rust on carbon steels pre-corroded by different gaseous pollutants
Ye Wan, Chuanwei Yan, Jun Tan, Zhi-Ming Shi, Chu'Nan Cao
Effects of alloying elements on microstructural evolution and mechanical properties of induction quenched-and-tempered steels
Won Jong Nam, Dae Sung Kim, Soon Tae Ahn
NaCl-induced accelerated oxidation of 304 stainless steel and Fe-Mn-Al alloy at 900°C
Jyh-Wei Lee, Chaur-Jeng Wang, Jenq-Gong Duh
Analysis of the diametrical compression test and the applicability to plastically deforming materials
A. T. Procopio, A. Zavaliangos, J. C. Cunningham
Atomic force microscopy (AFM) study on potassium hexatitanate whisker (K2O·6TiO2)
Jingwei Xie, Xiaohua Lu, Yu Zhu, Chang Liu, Ningzhong Bao, Xin Feng
Fabrication of multilayered titanium aluminide sheets by self-propagating high-temperature synthesis reaction using hot rolling and heat treatment
Jinkeun Oh, Sung Gyu Pyo, Sunghak Lee, Nack J. Kim
Hydroxyapatite filled chitosan-polyacrylic acid polyelectrolyte complexes
G. S. Sailaja, S. Velayudhan, M. C. Sunny, K. Sreenivasan, H. K. Varma, P. Ramesh
Effects of cracker cell temperature and V/III ratio on GaInP grown by chemical beam epitaxy using TIPGa, EDMIn and TBP
H. H. Ryu, H. L. Choi, L. P. Sadwick
Simulation of liquid infiltration and semi-solid extrusion for composite tubes by quasi-coupling thermal-mechanical finite element method
Le-Hua Qi, Zhong-Ke Shi, He-Jun Li, Pei-Ling Cui, Hong-Mei Han
Effect of interlayer exchange interaction and rare earth dilution on the electrical properties of two-dimensional system
M. A. Ahmed, M. A. Gabal, F. A. Radwan
An ultrasonic technique for the determination of casting-chill contact during solidification
R. Kayikci, W. D. Griffiths, C. Strangeways