Issue 18/2006
Content (67 Articles)
Electrical behavior of low density polyethylene containing an inhomogeneous distribution of ZnO nanoparticles
J. I. Hong, L. S. Schadler, R. W. Siegel, E. Mårtensson
Synthesis of Mg-α-sialon from the mixture of silicon, aluminum and magnesia powders in a flowing nitrogen atmosphere
Yawei Li, Shaobai Sang, Shengli Jin, Chunyan Yang, Nan Li
Crystallization behavior of PZT film prepared by sol–gel route
F. Yang, L. Wang, F. Zheng, W. D. Fei
Effect of electrodes and zeolite cover layer on hydrocarbon sensing with p-type perovskite SrTi0.8Fe0.2O3-δ thick and thin films
Kathy Sahner, Daniela Schönauer, Ralf Moos, Mahesh Matam, Michael L. Post
Preparation and properties of composite particles made by nano zinc oxide coated with titanium dioxide
W. Wu, Y-W. Cai, J-F. Chen, S-L. Shen, A. Martin, L-X. Wen
Morphology and modulus of vapor grown carbon nano fibers
Tetsuya Uchida, David P. Anderson, Marilyn L. Minus, Satish Kumar
Morphological, crystallization and plasticization studies on isomorphic blends of poly (vinyl fluoride) (PVF) and poly (vinylidene difluoride) (PVDF): using microhardness, XRD and SEM techniques
A. K. Gupta, R. Bajpai, J. M. Keller
Investigation of the microwave curing of the PR500 epoxy resin system
Mark Wallace, David Attwood, Richard J. Day, Frank Heatley
Influence of thermal treatment on the water release and the glassy structure of perlite
M. Roulia, K. Chassapis, J. A. Kapoutsis, E. I. Kamitsos, T. Savvidis
Shear induced phase coarsening in Polystyrene/Styrene-ethylene-butylene-styrene blends
Yong Wang, Cong Wang, Qin Zhang, Hong Yang, Rongni Du, Qiang Fu
Optimization of hardening of Al–Zr–Sc cast alloys
N. A. Belov, A. N. Alabin, D. G. Eskin, V. V. Istomin-Kastrovskii
The development of the microstructural and electrical characteristics of NTC thick-film thermistors during firing
Marko Hrovat, Darko Belavič, Janez Holc, Jena Cilenšek
Thermal and optical properties of Cd1-xZnxS thin films by photoacoustics
P. Raji, C. Sanjeeviraja, K. Ramachandran
Thermal, mechanical and vibration characteristics of epoxy-clay nanocomposites
T. P. Mohan, M. Ramesh Kumar, R. Velmurugan
Investigations into sol-gel silica and silica hybrid coatings for dielectromagnetic soft magnetic composite applications
Y. X. Pang, S. N. B. Hodgson, B. Weglinski, D. Gaworska
Epitaxial growth of ZnO films on (100) and (001) γ-LiAlO2 substrates by pulsed laser deposition
Jun Zou, Shengming Zhou, Jun Xu, Xia Zhang, Xiaomin Li, Zili Xie, Ping Han, Rong Zhang
Micromechanical analysis of an elastomer filled with particles organized in chain-like structure
E. Coquelle, G. Bossis, D. Szabo, F. Giulieri
“The implication of rheological principles for characterization of semi-solid Al–Si cast billets”
Omid Lashkari, Reza Ghomashchi
The relationship between the fracture toughness and grain boundary characteristics in hot-dip galvanized zinc coatings
G. Vincent, N. Bonasso, J. S. Lecomte, B. Colinet, B. Gay, C. Esling
Structure-property relationship in sol-gel derived polymer/silica hybrid nanocomposites prepared at various pH
Abhijit Bandyopadhyay, Mousumi De Sarkar, Anil K. Bhowmick
Effects of nitrogen content and weld cooling time on the simulated heat-affected zone toughness in a Ti-containing steel
Kook-soo Bang, Chan Park, Stephen Liu
13C CP/MAS NMR study of a wood/phenol–formaldehyde resin bondline
Marie-Pierre G. Laborie, Charles E. Frazier
Relationship between the transfer properties of the coating and impedance spectroscopy in reinforced cement-based materials
A. Aït-Mokhtar, O. Poupard, P. Dumargue
Fractographic and numerical study of hydrogen–plasticity interactions near a crack tip
J. Toribio, V. Kharin
Subcritical crack growth and power law exponent of Y–Si–Al–O(–N) glasses in aqueous environment
D. De Graaf, H. T. Hintzen, G. De With
A study on the carbon soot derived from the wood combustion and on the relative alkali-extractable fraction
A. Arrais, E. Diana, E. Boccaleri
Preparation of carbon coated ceramic foams by pyrolysis of polyurethane
M. Mann, G. E. Shter, G. S. Grader
Fabrication of yttrium-stabilized α-SiAlON powders with rod-like crystals by combustion synthesis
Guanghua Liu, Kexin Chen, Heping Zhou, Xiaoshan Ning, C. Pereira, J. M. F. Ferreira
Spontaneous formation of the B2 phase from a decagonal quasicrystal under reduced constraint
S. H. Kim, K. Chattopadhyay, B. J. Inkson, G. Möbus, W. T. Kim, D. H. Kim
Observations of microstructural refinement in Mg–Al–Si alloys containing strontium
A. Srinivasan, U. T. S. Pillai, J. Swaminathan, S. K. Das, B. C. Pai
Toughening effect of K resin on the fracture of polyamide 6/K resin blends
Bo Jing, Wen -Li Dai, Peng -Sheng Liu
Fabrication, thermal expansions, and mechanical properties of carbon/aluminum composites based on wood templates
Tian-Chi Wang, Tong-Xiang Fan, Di Zhang, Guo-Ding Zhang
Reducing the microcracks of mesophase-pitch-based carbon foams by long-time-coking method
Mei-Xian Wang, Cheng-Yang Wang, Wei Zhang
Synthesis, characteristics of blue electroluminescent copolymers containing fluorene unit and aliphatic non-conjugated segments
Zhuliang Yuan, Zongqiang Yu, Songting Tan
Phase equilibrium and glass formation in the SeO2–Ag2O–MoO3 system
A. Bachvarova-Nedelcheva, Y. Ivanova, Y. Dimitriev, R. Iordanova
A feasibility study of plasma nitriding of steel with an oxide layer on the surface
C. X. Li, H. Dong, T. Bell
Porosity and pore space characteristics of starch-processed porous ceramics
E. Gregorová, Z. Živcová, W. Pabst
Specific heat of the Ba0.7Sr0.3Ti1−yZryO (y = 0, 0.03, 0.05, 0.1) ferroelectric ceramics obtained by the temperature relaxation method
S. García, E. Marín, O. Delgado-Vasallo, J. Portelles, J. M. Siqueiros, E. Martínez, J. Heiras
Fabrication of high-dispersibility nanocrystals of calcined hydroxyapatite
Masahiro Okada, Tsutomu Furuzono
Effects of precursors in the ethanol-based sol–gel synthesis of Zn2SiO4:Mn phosphor
C. J. Kim, M. S. Kwon
Interfacial fracture properties of environmentally friendly hybrid systems
G. Reyes-Villanueva, S. Gupta
Synthesis of (Na0.5Bi0.5)TiO3 and (Na0.5Bi0.5)0.92Ba0.08TiO3 powders by a citrate method
Qing Xu, Shutao Chen, Wen Chen, Duanping Huang, Jing Zhou, Huajun Sun, Yueming Li
Preparation of dip-coated TiO2 photocatalyst on ceramic foam pellets
Hyunjung Kim, Sanghun Lee, Yoseop Han, Jaikoo Park
AFM fracture surface study of vinylester and unsaturated polyester based thermosets
M. A. Mosiewicki, W. F. Schroeder, F. L. Leite, P. S. P. Hermann, A. A. S. Curvelo, M. I. Aranguren, J. Borrajo
Application of electro-spray ionization mass spectrometry for characterization of titanium polyoxoalkoxides in sol-gel processes
A. Soloviev, E. G. Søgaard
Fabrication and microstructure of the SrTiO3 composite membranes by Sol–Gel process
Dong-Sik Bae, Eun-Jung Kim, Sang-Whan Park, Kyong-Sop Han
Effect of aging on transformation behavior and shape memory effect of a CuAlNb high temperature shape memory alloy
Z. Y. Gao, Y. Wu, Y. X. Tong, W. Cai, Y. F. Zheng, L. C. Zhao
Acid-mediated sol–gel synthesis of visible-light active photocatalysts
C. X. Dong, A. P. Xian, E. H. Han, J. K. Shang
Ion transport and battery studies of a new (PVP + KIO3) polymer electrolyte system
J. Siva Kumar, M. Jaipal Reddy, U. V. Subba Rao
Radiative trapping effect of Yb3+ ions in lead-germanate glasses
Zhongmin Yang, Zhonghong Jiang, Yuehui Liu, Zaide Deng
Relations between the creep-rupture properties and the fractal dimension of three-dimensional fracture surface in a cobalt-base alloy
M. Tanaka, Y. Kimura, N. Oyama, R. Kato
Effect of CaF2 on the sintering and thermal expansion of La0.85Sr0.15Cr0.95O3
Xifeng Ding, Lucun Guo
Polyaniline stabilized highly dispersed gold nanoparticle: an in-situ chemical synthesis route
Kaushik Mallick, Mike J. Witcomb, Mike S. Scurrell