Journal of Materials Science

Water-soluble binder of cellulose acetate butyrate/poly(ethylene glycol) blend for powder injection molding

Min Soo Park, Jin Kon Kim, Sangho Ahn, Hwan Jin Sung

Reaction synthesis of titanium aluminides

E. K. Y. Fu, R. D. Rawlings, H. B. McShane

Scanning electron microscope investigations of highly conducting organic composites

M. Golub, L. Szczesniak, A. Graja, A. Brau, J.-P. Farges

Magnetic and processability studies on rubber ferrite composites based on natural rubber and mixed ferrite

K. A. Malini, E. M. Mohammed, S. Sindhu, P. A. Joy, S. K. Date, S. D. Kulkarni, P. Kurian, M. R. Anantharaman

Dual-solution-precipitation mechanism of combustion synthesis of TiC-Fe cermet with fine Ti powder

Quncheng Fan, Huifen Chai, Zhihao Jin

Fine SiC fiber synthesized from organosilicon polymers: relationship between spinning temperature and melt viscosity of precursor polymers

A. Idesaki, M. Narisawa, K. Okamura, M. Sugimoto, S. Tanaka, Y. Morita, T. Seguchi, Masayoshi Itoh

Study on phase transformation of Fe-Ni powders during mechanical alloying

Li-Hui Zhu, Xue-Ming Ma, Ling Zhao

Effect of chromium on the corrosion behavior of iron aluminides in thiosulfate-chloride solution

Yoon-Seok Choi, Seung-Ho Ahn, Jung-Gu Kim, C. G. McKamey

Self-propagating high-temperature synthesis of Al2O3-TiC-Al composites by aluminothermic reactions

T. D. Xia, T. Z. Liu, W. J. Zhao, B. Y. Ma, T. M. Wang

Investigation on defects in HPHT-grown diamond single crystals

Long-Wei Yin, Mu-Sen Li, Dong-Sheng Sun, Zhi-Guang Gong, Zhang-Ying Yao, Jian-Jun Cui, Zhao-Yin Hao

Fracture behaviour of cross-linked collagen fibres

K. H. Rajini, R. Usha, V. Arumugam, R. Sanjeevi

Effect of the microstructure on the mechanical properties of a directionally solidified Y3Al5O12/Al2O3 eutectic fiber

D.-Y. Park, J.-M. Yang

The effect of high temperature exposure on dendritic segregation in a conventionally cast Ni based superalloy

M. J. Starink, R. C. Thomson

Ceramic joining IV. effects of processing conditions on the properties of alumina joined via Cu/Nb/Cu interlayers

R. A. Marks, J. D. Sugar, A. M. Glaeser

Dielectric dispersion in ZnF2-Bi2O3-TeO2 glass system

D. K. Durga, N. Veeraiah

Laser-induced surface acoustic waves for evaluation of elastic stiffness of plasma sprayed materials

X. Q. Ma, Y. Mizutani, M. Takemoto

LaFeO3 perovskite-type oxide prepared by oxide-mixing, co-precipitation and complex synthesis methods

S. Nakayama

The structural transitions during leaching of Ni2Al3 phase in a Raney Ni-Al alloy

Rong Wang, Zhilong Lu, Tsun Ko

Effect of self heating on the torque vs. equivalent tensile strain plot in high temperature torsion of visco-plastic material

R. Kouitat Njiwa, G. Métauer, A. Marchal, J. Von Stebut

Effects of high austenitizing temperature and austenite deformation on formation of martensite in Fe-Ni-C alloys

T. N. Durlu

Aluminide coating formation on nickel-base superalloys by pack cementation process

Z. D. Xiang, J. S. Burnell-Gray, P. K. Datta

Imaging of surface strain and polishing artefacts in fused silica by environmental scanning electron microscopy

S. P. Galvin, B. J. Griffin, J. Browne

Simulation of the flow strength and microstructure of titanium aluminide in hot forging

M. C. Abernathy, R. A. Mirsham, A. Raman, B. Q. Li, A. A. Wereszczak

Comparative study of copper films prepared by ionized metal plasma sputtering and chemical vapor deposition in the Cu/TaN/SiO2/Si multilayer structure

Khin Maung Latt, C. Sher-Yi, T. Osipowicz, K. Lee, Y. K. Lee

Effect of grain size distribution on the strength of porous Si3N4 ceramics composed of elongated β-Si3N4 grains

C. Kawai

Porous Ni/TiO2 substrates for planar solid oxide fuel cell applications

F. Meschke, F. J. Dias, F. Tietz

List of Reviewers

Errata