Issue 3/2014
Content (50 Articles)
Impact of water-soluble cellulose ethers on polymer-modified mortars
D. D. Nguyen, L. P. Devlin, P. Koshy, C. C. Sorrell
Electric pulse consolidation: an alternative to spark plasma sintering
M. S. Yurlova, V. D. Demenyuk, L. Yu. Lebedeva, D. V. Dudina, E. G. Grigoryev, E. A. Olevsky
Sintering mechanisms of blended Ti6Al4V powder from diffusion path analysis
Xiaoyan Xu, Guiru Liu Nash, Philip Nash
Preparation of transparent and conductive cellulose nanocrystals/graphene nanoplatelets films
L. Valentini, S. Bittolo Bon, E. Fortunati, J. M. Kenny
Hydrothermal synthesis of lead dioxide/multiwall carbon nanotube nanocomposite and its application in removal of some organic water pollutants
Shahram Ghasemi, Hassan Karami, Hassan Khanezar
Modeling of nucleation and growth during vapor condensation on liquid substrates
P. Anantha, Ting Cheng, Chee Cheong Wong
Effect of post-annealing process on the optical properties of lateral composition-modulated GaInP structure grown by molecular beam epitaxy
K. W. Park, C. Y. Park, Sooraj Ravindran, Y. T. Lee
Wide distribution of shish-kebab structure and tensile property of micro-injection-molded isotactic polypropylene microparts: a comparative study with injection-molded macroparts
Yamin Pan, Suyu Shi, Wenzhong Xu, Guoqiang Zheng, Kun Dai, Chuntai Liu, Jingbo Chen, Changyu Shen
Influence of heat treatment conditions on the structure of hollow carbon fibers prepared from solid PVA fibers using iodine pretreatment
Ummul Khair Fatema, Fujio Okino, Yasuo Gotoh
Enhanced dielectric and tunable properties of barium strontium titanate thin films through introducing Nd(Zn1/2Ti1/2)O3 and adjusting Ba/Sr
Xiaohua Sun, Ying Yang, Qiaoling Zhang, Xin Zhou, Zongzhi Hu, Caihua Huang
Adsorption and photocatalysis removal of fulvic acid by TiO2–graphene composites
Qi Zhou, Yong-Hui Zhong, Xing Chen, Jin-Huai Liu, Xing-Jiu Huang, Yu-Cheng Wu
Fabrication and characterization of PCL/gelatin/chitosan ternary nanofibrous composite scaffold for tissue engineering applications
Sneh Gautam, Chia-Fu Chou, Amit Kumar Dinda, Pravin D. Potdar, Narayan Chandra Mishra
One-step preparation of hierarchical porous carbons from poly(vinylidene chloride)-based block copolymers
Jie Yang, Yongzhong Bao, Pengju Pan
Evolution of tin whiskers and subsiding grains in thermal cycling
Ying Wang, John E. Blendell, Carol A. Handwerker
Mechanical response of reaction phases of the TiAl/steel brazed joint under a tensile load
Yulong Li, Wen Liu, Cheng Zhao, Xiaowu Hu, Dusan P. Sekulic
Hot working behavior of a WE54 magnesium alloy
M. Lentz, S. Gall, F. Schmack, H. M. Mayer, W. Reimers
Kinetics of shrinkage and shape evolution during liquid phase sintering of tungsten heavy alloy
Jose A. Alvarado-Contreras, Eugene A. Olevsky, Andrey L. Maximenko, Randall M. German
Fatigue behaviour of commercially pure aluminium processed by rotary swaging
Mustafa A. Abdulstaar, Mansour Mhaede, Manfred Wollmann, Lothar Wagner
One-pot synthesis of carbon nanotubes from renewable resource: cellulose acetate
Lyubov Dubrovina, Olga Naboka, Volodymyr Ogenko, Paul Gatenholm, Peter Enoksson
Hardness and fracture toughness of thermoelectric La3−x Te4
James M. Ma, Samad A. Firdosy, Richard B. Kaner, Jean-Pierre Fleurial, Vilupanur A. Ravi
The quaternary Al–Fe–Ni–Si phase equilibria in Al-rich corner: experimental measurement and thermodynamic modeling
Dan Hao, Biao Hu, Kai Zhang, Lijun Zhang, Yong Du
Synthesis of core–shell-structured SBA-15@MgAl2O4 with enhanced catalytic performance of propane dehydrogenation
Shijian Zhou, Yuming Zhou, Yiwei Zhang, Xiaoli Sheng, Zewu Zhang, Jie Kong
Optoelectronic and thermoelectric properties of KAuX5 (X = S, Se): a first principles study
Wilayat Khan, A. H. Reshak
Multicomponent materials from machining chips compacted by equal-channel angular pressing
Rimma Lapovok, Yuanshen Qi, Hoi Pang Ng, Verena Maier, Yuri Estrin
A first-principles study on the structural, elastic, electronic, and optical properties of CdRh2O4
L. Guo, S. T. Zhang, W. J. Feng, G. Hu
High-performance nanocomposite films: reinforced with chitosan nanofiber extracted from prawn shells
Chuchu Chen, Dagang Li, Xu Shao
New chiral liquid crystalline monomers, polymers, and elastomers derived from menthol derivatives: synthesis and mesomorphism
Jian-She Hu, Xiao-Feng Liu, Qing-Bao Meng, Ying Zhang
Fabrication of sub-micrometer graphene ribbon using electrospun nanofiber
Won Mook Choi, Tran Van Tam, Nguyen Bao Trung
A microscale formaldehyde gas sensor based on Zn2SnO4/SnO2 and produced by combining hydrothermal synthesis with post-synthetic heat treatment
Wei Tang, Jing Wang, Pengjun Yao, Xiaogan Li
Morphology and fracture toughness of nanostructured epoxy thermosets containing macromolecular miktobrushes composed of poly(ε-caprolactone) and polydimethylsiloxane side chains
Chongyin Zhang, Yulin Yi, Lei Li, Sixun Zheng
Effect of hollow sphere size and size distribution on the quasi-static and high strain rate compressive properties of Al-A380–Al2O3 syntactic foams
Joseph A. Santa Maria, Benjamin F. Schultz, J. B. Ferguson, Nikhil Gupta, Pradeep K. Rohatgi
Study of the relationship between crystal structure and luminescence in rare-earth-implanted Ga2O3 nanowires during annealing treatments
I. López, K. Lorenz, E. Nogales, B. Méndez, J. Piqueras, E. Alves, J. A. García
Effect of sintering temperature and cooling rate on the morphology, mechanical behavior and apatite-forming ability of a novel nanostructured magnesium calcium silicate scaffold prepared by a freeze casting method
Masoud Hafezi, Nader Nezafati, Ali Nadernezhad, Mana Yasaei, Ali Zamanian, Sahba Mobini
Experimental investigation and thermodynamic assessment of the Hf–Ge system
Ying Tang, Biao Hu, Jiong Wang, Yong Du, Kaiming Cheng, Dandan Liu, Ming Yin, Philip Nash
Enhancement of electroconductivity of polyaniline/graphene oxide nanocomposites through in situ emulsion polymerization
Syed Muhammad Imran, YouNa Kim, Godlisten N. Shao, Manwar Hussain, Yong-ho Choa, Hee Taik Kim
Shifting mechanisms in the initial stage of dye photodegradation by hollow TiO2 nanospheres
Bing Wang, Chuang Li, Hao Cui, Jin Zhang, Jianping Zhai, Qin Li
Core–shell-structured cross-linked poly(glycidyl methacrylate)-coated carbonyl iron microspheres and their magnetorheology
So Young Kim, Seung Hyuk Kwon, Ying Dan Liu, Jeong-Seop Lee, Chun-Yeol You, Hyoung Jin Choi
Effects of annealing ambient on the photoluminescence properties of Si-rich oxide/SiO2 multilayer films containing Si-nanocrystals
Xinzhan Wang, Xiang Yu, Wei Yu, Huina Feng, Jin Wang, Chenchen Yin, Wanbing Lu, Guangsheng Fu
Low-temperature thermoelectric and magnetic properties of Ca3−x Bi x Co4O9+δ (0 ≤ x ≤ 0.30)
Ankam Bhaskar, Z.-R. Lin, Chia-Jyi Liu
Microstructure and properties of Sip/Al–20 wt% Si composite prepared by hot-pressed sintering technology
Jun Liu, Ziyang Xiu, Xue Liang, Qiang Li, Murid Hussain, Jing Qiao, Longtao Jiang
Kraft lignin and silica as precursors of advanced composite materials and electroactive blends
Teofil Jesionowski, Łukasz Klapiszewski, Grzegorz Milczarek
Experimental and FEM analysis of the compressive behavior of 3D random fibrous materials with bonded networks
Qiang Liu, Zixing Lu, Man Zhu, Zhenyu Yang, Zijun Hu, Junning Li
Origins of saccharin-induced stress reduction based on observed fracture behavior of electrodeposited Ni films
Sumit K. Soni, Brian W. Sheldon, Sean J. Hearne
Promotion of texture weakening in magnesium by alloying and thermomechanical processing: (I) alloying
M. Sanjari, A. Farzadfar, A. S. H. Kabir, H. Utsunomiya, In-Ho Jung, R. Petrov, L. Kestens, S. Yue
Promotion of texture weakening in magnesium by alloying and thermomechanical processing. II: rolling speed
M. Sanjari, A. S. H. Kabir, A. Farzadfar, H. Utsunomiya, R. Petrov, L. Kestens, S. Yue
Polyethyleneimine-functionalized large pore ordered silica materials for poorly water-soluble drug delivery
A. Martín, R. A. García, D. Sen Karaman, J. M. Rosenholm