Issue 9/2012
Content (31 Articles)
Materials development for intermediate-temperature solid oxide electrochemical devices
Ainara Aguadero, Lydia Fawcett, Samuel Taub, Russell Woolley, Kuan-Ting Wu, Ning Xu, John A. Kilner, Stephen J. Skinner
Effect of casting parameters on the freezing point position of the 304 stainless steel during twin-roll strip casting process by numerical simulation
Q. Li, Y. K. Zhang, L. G. Liu, P. Zhang, Y. Zhang, Y. Fang, Q. X. Yang
Adhesive surface interactions of cellulose nanocrystals from different sources
Roya R. Lahiji, Yaman Boluk, Mark McDermott
Hot deformation characteristics and strain-dependent constitutive analysis of Inconel 600 superalloy
Horng-Yu Wu, Feng-Jun Zhu, Shang-Chih Wang, Woei-Ren Wang, Chien-Cheng Wang, Chui-Hung Chiu
Microwave dielectric properties of (1 − x)Nd(Co1/2Ti1/2)O3–x(Ca0.8Sr0.2)TiO3 composite ceramics
Ching-Fang Tseng, Chi-Chieh Huang
A study of computational mechanics of 3D spacer fabric: factors affecting its compression deformation
Xiaonan Hou, Hong Hu, Vadim V. Silberschmidt
Hot deformation behavior of Ti-15-3 titanium alloy: a study using processing maps, activation energy map, and Zener–Hollomon parameter map
Jingqi Zhang, Hongshuang Di, Hongtao Wang, Kun Mao, Tianjun Ma, Yu Cao
Suppressing the growth of interfacial Cu–Sn intermetallic compounds in the Sn–3.0Ag–0.5Cu–0.1Ni/Cu–15Zn solder joint during thermal aging
Wei-Yu Chen, Chi-Yang Yu, Jenq-Gong Duh
Control of the structure, morphology and dielectric properties of bismuth titanate ceramics by praseodymium substitution using an intermediate fuel agent-assisted self-combustion synthesis
Warapong Krengvirat, Srimala Sreekantan, M. N. Ahmad-Fauzi, Charoen Chinwanitcharoen, Go Kawamura, Atsunori Matsuda
Interfacial reactions between Sn–57Bi–1Ag solder and electroless Ni-P/immersion Au under solid-state aging
Christopher Fuchs, Timo Schreck, Michael Kaloudis
Synthesis of A356 Al–high-Ca fly ash composites by pressure infiltration technique and their characterization
Grigorios Itskos, Pradeep K. Rohatgi, Angeliki Moutsatsou, John D. DeFouw, Nikolaos Koukouzas, Charalampos Vasilatos, Benjamin F. Schultz
Microstructure and texture of Al coating during kinetic spraying and heat treatment
Kicheol Kang, Hyungkwon Park, Gyuyeol Bae, Changhee Lee
Microstructure and elevated temperature properties of a refractory TaNbHfZrTi alloy
O. N. Senkov, J. M. Scott, S. V. Senkova, F. Meisenkothen, D. B. Miracle, C. F. Woodward
Effect of welding parameters on microstructure and mechanical properties of friction stir welded 2219Al-T6 joints
Z. Zhang, B. L. Xiao, Z. Y. Ma
Grain boundary self-diffusion in Fe films with a stable nanostructure
H. Schmidt, S. Chakravarty, M. Jiang, E. Hüger, P. K. Parida, T. Geue, J. Stahn, U. Tietze, D. Lott
Tuning the stress induced martensitic formation in titanium alloys by alloy design
C. Li, J. H. Chen, X. Wu, W. Wang, S. van der Zwaag
Effects of Ag addition on the microstructure and thermal stability of 6156 alloy
Haifeng Zhang, Ziqiao Zheng, Yi Lin, Xianfu Luo, Jing Zhong
Effects of pulsed magnetic annealing on Goss texture development in the primary recrystallization of grain-oriented electrical steel
Junjun Huang, Lijuan Li, Lihua Liu, Xiang Jiang, Xin Xia, Qijie Zhai
Polyamide 6.9 nanofibres electrospun under steady state conditions from a solvent/non-solvent solution
Bert De Schoenmaker, Annelies Goethals, Lien Van der Schueren, Hubert Rahier, Karen De Clerck
Optical and photovoltaic properties of silicon wire solar cells with controlled ZnO nanorods antireflection coating
Seong-Ho Baek, Bum-Young Noh, Jang-Kyoo Shin, Jae Hyun Kim
Influence of additions of Zr, Ti–B, Sr, and Si as well as of mold temperature on the hot-tearing susceptibility of an experimental Al–2% Cu–1% Si alloy
A. M. Nabawy, A. M. Samuel, F. H. Samuel, H. W. Doty
Synthesis of Cu3BiS3 and AgBiS2 crystallites with controlled morphology using hypocrellin template and their catalytic role in the polymerization of alkylsilane
Jiangmei Yan, Juan Yu, Wenjun Zhang, Yanan Li, Xiaoyun Yang, Aimei Li, Xikun Yang, Wei Wang, Jiaqiang Wang
Impact of bleaching pine fibre on the fibre/cement interface
G. H. D. Tonoli, M. N. Belgacem, J. Bras, M. A. Pereira-da-Silva, F. A. Rocco Lahr, H. Savastano Jr.
2-Methyl oxazoline-grafted carbon nanofibers: preparation, characterization and their role in elastomeric actuators
Titash Mondal, Anil K. Bhowmick
CdS-sensitized ZnO nanorod arrays coated with TiO2 layer for visible light photoelectrocatalysis
Jianglin Ouyang, Menglei Chang, Xinjun Li
Tubular hydroxyapatite formation through a hydrothermal process from α-tricalcium phosphate with anatase
Masanobu Kamitakahara, Hiroko Takahashi, Koji Ioku
Complex impedance analysis on a layered perovskite-like ceramic: La3Ti2TaO11
Chunchun Li, Xiaoyong Wei
Surface modification of LiCo1/3Ni1/3Mn1/3O2 with CoAl-MMO for lithium-ion batteries
Zhanxu Yang, Zhilin Song, Gang Chu, Xiaoxue Kang, Tieqiang Ren, Wensheng Yang, Qingdong Qiao