Top

Published in:

2022 | OriginalPaper | Chapter

4. Kreative Methoden

Authors : Roland Lachmayer, Tobias Ehlers, Rene Bastian Lippert

Published in: Entwicklungsmethodik für die Additive Fertigung

Publisher: Springer Berlin Heidelberg

Activate our intelligent search to find suitable subject content or patents.

search-config

AI-assisted search

Off

Zusammenfassung

Im folgenden Kapitel werden die kreativen Methoden des „Design with Additive Manufacturing“ vorgestellt. Der Fokus liegt auf der Nutzung der konstruktiven Freiheiten und Potentiale zur Erweiterung des Lösungsraums. Dazu werden in Abschnitt 4.1 Anforderungen in Form einer Checkliste spezifiziert, welche bei der additiven Fertigung berücksichtigt werden müssen. Anschließend werden in Abschnitt 4.2 die Gestaltungsziele und konstruktiven Widersprüche vorgestellt. Dabei ist hervorzuheben, dass durch das Verfolgen mehrerer Gestaltungsziele in der Konzeptphase ein deutlicher Mehrwert gegenüber konventionell gefertigten Produkten realisiert werden kann. Ausgehend von Entwicklungszielen und Widersprüchen thematisieren wir in Abschnitt 4.3 die allgemeine Funktionsstruktur, aus der die Notwendigkeit des Effect-Engineerings (Abschnitt 4.4) hervorgeht. Anschließend wird in Abschnitt 4.5 die Produktarchitektur erarbeitet und Ansätze aus der Bionik vorgestellt. Darauf aufbauend werden in Abschnitt 4.6 Methoden für den Entwurf, wie Gestaltungsprinzipien, die Methode der Einteiligen Maschine und Methoden der Strukturoptimierung, detailliert betrachtet. Abschließend wird in Abschnitt 4.7 die Entwicklungsumgebung thematisiert.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Wirtschaft"

Online-Abonnement

Mit Springer Professional "Wirtschaft" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 340 Zeitschriften

aus folgenden Fachgebieten:

Bauwesen + Immobilien
Business IT + Informatik
Finance + Banking
Management + Führung
Marketing + Vertrieb
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

previous chapter Bauteilauswahl

next chapter Restriktive Methoden

Hague, R.; Mansour, S.; Saleh, N. Design opportunities with rapid manufacturing. Assembly Automation 2003, 23, 346–356, doi:https://doi.org/10.1108/01445150310698643.

Hague *, R.; Mansour, S.; Saleh, N. Material and design considerations for rapid manufacturing. International Journal of Production Research 2004, 42, 4691–4708, doi:https://doi.org/10.1080/00207840410001733940.

Becker, R.; Grzesiak, A.; Henning, A. Rethink assembly design. Assembly Automation 2005, 25, 262–266, doi:https://doi.org/10.1108/01445150510626370.

Michael J. Burton. Design for rapid manufacture: developing an appropriate knowledge transfer tool for industrial designers; Loughborough University, 2011.

Eyers, D.; Dotchev, K. Technology review for mass customisation using rapid manufacturing. Assembly Automation 2010, 30, 39–46, doi:https://doi.org/10.1108/01445151011016055.

Petrovic, V.; Vicente Haro Gonzalez, J.; Jordá Ferrando, O.; Delgado Gordillo, J.; Ramón Blasco Puchades, J.; Portolés Griñan, L. Additive layered manufacturing: sectors of industrial application shown through case studies. International Journal of Production Research 2011, 49, 1061–1079, doi:https://doi.org/10.1080/00207540903479786.

Bin Maidin, S.; Campbell, I.; Pei, E. Development of a design feature database to support design for additive manufacturing. Assembly Automation 2012, 32, 235–244, doi:https://doi.org/10.1108/01445151211244375.

Doubrovski, E.L.; Verlinden, J.C.; Horvath, I. First Steps Towards Collaboratively Edited Design for Additive Manufacturing Knowledge, 2012.

Lachmayer, R.; Lippert, R.B. Entwicklungsmethodik für die Additive Fertigung; Springer Berlin Heidelberg: Berlin, Heidelberg, 2020, ISBN 978–3–662–59788–0.

10.

Bender, B.; Gericke, K. Pahl/Beitz Konstruktionslehre; Springer Berlin Heidelberg: Berlin, Heidelberg, 2021, ISBN 978–3–662–57302–0.

11.

Ehlers, T.; Wurst, J.; Lachmayer, R. Bewertung der ökologischen und ökonomischen Nachhaltigkeit in der Additiven Fertigung. In Konstruktion für die Additive Fertigung 2019; Lachmayer, R., Rettschlag, K., Kaierle, S., Eds.; Springer Berlin Heidelberg: Berlin, Heidelberg, 2020; pp 177–199, doi:https://doi.org/10.1007/978-3-662-61149-4_12.

12.

Wurst, J.; Schneider, J.A.; Ehlers, T.; Mozgova, I.; Lachmayer, R. Corporate Strategy Based Quantitative Assessment of Sustainability Indicators at the Example of a Laser Powder Bed Fusion Process. In Sustainable Design and Manufacturing; Scholz, S.G., Howlett, R.J., Setchi, R., Eds.; Springer Singapore: Singapore, 2022; pp 34–44, doi:https://doi.org/10.1007/978-981-16-6128-0_4.

13.

Roth, K. Konstruieren mit Konstruktionskatalogen, 3. Aufl., erw. und neu gestaltet; Springer: Berlin, Heidelberg, 2000, ISBN 9783540671428.

14.

Lachmayer, R.; Bode, B.; Grabe, T.; Rettschlag, K. Integration spezifischer Effekte in Strukturbauteilen mittels additiver Fertigungsverfahren. In Konstruktion für die Additive Fertigung 2019; Lachmayer, R., Rettschlag, K., Kaierle, S., Eds.; Springer Berlin Heidelberg: Berlin, Heidelberg, 2020; pp 1–10, doi:https://doi.org/10.1007/978-3-662-61149-4_1.

15.

Ehlers, T.; Lippert, R.B.; Lachmayer, R. Bewertung von Strukturbauteilen aus gradierten Materialien für Selektives Laserstrahlschmelzen. In Konstruktion für die Additive Fertigung 2018; Lachmayer, R., Lippert, R.B., Kaierle, S., Eds.; Springer Berlin Heidelberg: Berlin, Heidelberg, 2020; pp 109–127, doi:https://doi.org/10.1007/978-3-662-59058-4_7.

16.

Urbanek, S.; Keuter, R.; Peter, E.; Ponick, B. Effects of Continuous Rotor Skewing in Additively Manufactured Permanent Magnet Rotors. In 2020 International Symposium on Power Electronics, Electrical Drives, Automation and Motion (SPEEDAM). 2020 International Symposium on Power Electronics, Electrical Drives, Automation and Motion (SPEEDAM), Sorrento, Italy, 24–26 Jun. 2020; IEEE, 2020; pp 662–669, doi:https://doi.org/10.1109/SPEEDAM48782.2020.9161932.

17.

Adam, G.A.; Zimmer, D. Design for Additive Manufacturing—Element transitions and aggregated structures. CIRP Journal of Manufacturing Science and Technology 2014, 7, 20–28, doi:https://doi.org/10.1016/j.cirpj.2013.10.001.

18.

Hengsbach, F.; Koppa, P.; Holzweissig, M.J.; Aydinöz, M.E.; Taube, A.; Hoyer, K.-P.; Starykov, O.; Tonn, B.; Niendorf, T.; Tröster, T.; et al. Inline additively manufactured functionally graded multi-materials: microstructural and mechanical characterization of 316L parts with H13 layers. Prog Addit Manuf 2018, 3, 221–231, doi:https://doi.org/10.1007/s40964-018-0044-4.

19.

Kumke, M. Methodisches Konstruieren von additiv gefertigten Bauteilen; Springer Fachmedien Wiesbaden: Wiesbaden, 2018, ISBN 978-3-658-22208-6.

20.

Rosa, F.; Manzoni, S.; Casati, R. Damping behavior of 316L lattice structures produced by Selective Laser Melting. Materials & Design 2018, 160, 1010–1018, doi:https://doi.org/10.1016/j.matdes.2018.10.035.

21.

Urbanek, S.; Ponick, B. Surface Eddy Current Loss Reduction in Additively Manufactured Permanent Magnet Rotor Active Parts. In 2018 XIII International Conference on Electrical Machines (ICEM). 2018 XIII International Conference on Electrical Machines (ICEM), Alexandroupoli, 03–06 Sep. 2018; IEEE, 2018; pp 1317–1322, doi:https://doi.org/10.1109/ICELMACH.2018.8507151.

22.

Müller, P.; Gembarski, P.C.; Lachmayer, R. Spezifikationen einer Entwicklungsumgebung zur Synthese einer patientenindividuellen Kurzschaftendoprothese der Hüfte. In Stuttgarter Symposium für Produktentwicklung SSP 2021: Stuttgart, 20. Mai 2021, Wissenschaftliche Konferenz; Binz, H., Bertsche, B., Spath, D., Roth, D., Eds.; Stuttgart : Fraunhofer-Institut für Arbeitswirtschaft und Organisation IAO: Stuttgart, 2021, doi:https://doi.org/10.18419/opus-11478.

23.

Kamps, T.; Gralow, M.; Schlick, G.; Reinhart, G. Systematic Biomimetic Part Design for Additive Manufacturing. Procedia CIRP 2017, 65, 259–266, doi:https://doi.org/10.1016/j.procir.2017.04.054.

24.

Yang, S.; Tang, Y.; Zhao, Y.F. Assembly-Level Design for Additive Manufacturing: Issues and Benchmark. In Volume 2A: 42nd Design Automation Conference. ASME 2016 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, Charlotte, North Carolina, USA, 21–24 Aug. 2016; American Society of Mechanical Engineers, 2016, doi:https://doi.org/10.1115/DETC2016-59565.

25.

Tang, Y.; Yang, S.; Zhao, Y.F. Sustainable Design for Additive Manufacturing Through Functionality Integration and Part Consolidation. In Handbook of Sustainability in Additive Manufacturing; Muthu, S.S., Savalani, M.M., Eds.; Springer Singapore: Singapore, 2016; pp 101–144, doi:https://doi.org/10.1007/978-981-10-0549-7_6.

26.

Künneke, T.; Zimmer, D. Funktionsintegration additiv gefertigter Dämpfungsstrukturen bei Biegeschwingungen. In Additive Fertigung von Bauteilen und Strukturen; Richard, H.A., Schramm, B., Zipsner, T., Eds.; Springer Fachmedien Wiesbaden: Wiesbaden, 2017; pp 61–74, doi:https://doi.org/10.1007/978-3-658-17780-5_4.

27.

Zhang, C.; Wang, S.; Li, J.; Zhu, Y.; Peng, T.; Yang, H. Additive manufacturing of products with functional fluid channels: A review. Additive Manufacturing 2020, 36, 101490, doi:https://doi.org/10.1016/j.addma.2020.101490.

28.

Biermann, T.; Ziebehl, A.; Grabe, T.; Röttger, J.; Ley, P.-P.; Wolf, A.; Lachmayer, R. Magnetically actuated solid body PDMS lens. In Optical Components and Materials XVIII. Optical Components and Materials XVIII, Online Only, United States, 06–12 Mar. 2021; Digonnet, M.J., Jiang, S., Eds.; SPIE, 2021– 2021; p 30, doi:https://doi.org/10.1117/12.2578551.

29.

Ehlers, T.; Meyer, I.; Oel, M.; Bode, B.; Gembarski, P.C.; Lachmayer, R. Effect-Engineering by Additive Manufacturing. In Innovative Product Development by Additive Manufacturing; Lachmayer, R., Bode, B., Kaierle, S., Eds.; Springer Nature Switzerland AG: Cham, 2022; pp 1–19, doi:https://doi.org/10.1007/978-3-031-05918-6_1.

30.

Lachmayer, R.; Gembarski, P.C.; Gottwald, P.; Lippert, R.B. The Potential of Product Customization Using Technologies of Additive Manufacturing. In Managing Complexity; Bellemare, J., Carrier, S., Nielsen, K., Piller, F.T., Eds.; Springer International Publishing: Cham, 2017; pp 71–81, doi:https://doi.org/10.1007/978-3-319-29058-4_6.

31.

Ehlers, T.; Lachmayer, R.; Vajna, S.; Halle, T. Producibility. In Integrated Design Engineering; Vajna, S., Ed.; Springer International Publishing: Cham, 2020; pp 287–323, doi:https://doi.org/10.1007/978-3-030-19357-7_9.

32.

Harun, W.; Kamariah, M.; Muhamad, N.; Ghani, S.; Ahmad, F.; Mohamed, Z. A review of powder additive manufacturing processes for metallic biomaterials. Powder Technology 2018, 327, 128–151, doi:https://doi.org/10.1016/j.powtec.2017.12.058.

33.

Grabe, T.; Lammers, M.; Wang, S.; Wang, X.; Rettschlag, K.; Sleiman, K.; Barroi, A.; Biermann, T.; Ziebehl, A.; Röttger, J.; et al. Additive anufacturing of fused silica using coaxial laser glass deposition: experiment, simulation and discussion. In Laser 3D Manufacturing VIII. Laser 3D Manufacturing VIII, Online Only, United States, 06–12 Mar. 2021; Helvajian, H., Gu, B., Chen, H., Eds.; SPIE, 2021 – 2021; p 32, doi:https://doi.org/10.1117/12.2577205.

34.

Reiher, T. Intelligente Optimierung von Produktgeometrien für die additive Fertigung. Dissertation; Shaker Verlag, 2018.

35.

Wiberg, A.; Persson, J.; Ölvander, J. Design for additive manufacturing – a review of available design methods and software. RPJ 2019, 25, 1080–1094, doi:https://doi.org/10.1108/RPJ-10-2018-0262.

36.

Emmelmann, C.; Sander, P.; Kranz, J.; Wycisk, E. Laser Additive Manufacturing and Bionics: Redefining Lightweight Design. Physics Procedia 2011, 12, 364–368, doi:https://doi.org/10.1016/j.phpro.2011.03.046.

37.

Koltze, K.; Souchkov, V. Systematische Innovation: TRIZ-Anwendung in der Produkt- und Prozessentwicklung, 1. Aufl.; Carl Hanser Fachbuchverlag: s.l., 2010, ISBN 978-3446421325.

38.

Brockmöller, T.; Mozgova, I.; Lachmayer, R. An approach to analyse the potential of tailored forming by TRIZ Reverse. Proceedings of the 21st International Conference on Engineering Design (ICED 17), Vol 4: Design Methods and Tools; Vancouver, Canada, 2017; pp 445–452.

39.

Kloock-Schreiber, D.; Brockmöller, T.; Schneider, J.; Gembarski, P.; Mozgova, I.; Lachmayer, R. TRIZ-Reverse for PSS Potential Determination. In . Novi Sad, Serbia, sn, 2020.

40.

Gadd, K. TRIZ für Ingenieure: Theorie und Praxis des erfinderischen Problemlösens; Wiley-VCH Verlag GmbH & Co. KGaA: Weinheim, 2016, ISBN 978-3-527-33777-4.

41.

Singh, S.; Ramakrishna, S. Biomedical applications of additive manufacturing: Present and future. Current Opinion in Biomedical Engineering 2017, 2, 105–115, doi:https://doi.org/10.1016/j.cobme.2017.05.006.

42.

Sabahi, N.; Chen, W.; Wang, C.-H.; Kruzic, J.J.; Li, X. A Review on Additive Manufacturing of Shape-Memory Materials for Biomedical Applications. JOM 2020, 72, 1229–1253, doi:https://doi.org/10.1007/s11837-020-04013-x.

43.

Ahangar, P.; Cooke, M.E.; Weber, M.H.; Rosenzweig, D.H. Current Biomedical Applications of 3D Printing and Additive Manufacturing. Applied Sciences 2019, 9, 1713, doi:https://doi.org/10.3390/app9081713.

44.

Scott-Emuakpor, O.; George, T.; Runyon, B.; Holycross, C.; Langley, B.; Sheridan, L.; O’Hara, R.; Johnson, P.; Beck, J. Investigating Damping Performance of Laser Powder Bed Fused Components With Unique Internal Structures. In Volume 7C: Structures and Dynamics. ASME Turbo Expo 2018: Turbomachinery Technical Conference and Exposition, Oslo, Norway, 11–15 Jun. 2018; American Society of Mechanical Engineers, 2018, doi:https://doi.org/10.1115/GT2018-75977.

45.

Scott-Emuakpor, O.; George, T.; Runyon, B.; Langley, B.; Sheridan, L.; Holycross, C.; O’Hara, R.; Johnson, P. Forced-Response Verification of the Inherent Damping in Additive Manufactured Specimens. In Mechanics of Additive and Advanced Manufacturing, Volume 8; Kramer, S., Jordan, J.L., Jin, H., Carroll, J., Beese, A.M., Eds.; Springer International Publishing: Cham, 2019; pp 81–86, doi:https://doi.org/10.1007/978-3-319-95083-9_15.

46.

Scott-Emuakpor, O.; Beck, J.; Runyon, B.; George, T. Determining unfused powder threshold for optimal inherent damping with additive manufacturing. Additive Manufacturing 2021, 38, 101739, doi:https://doi.org/10.1016/j.addma.2020.101739.

47.

Künneke, T.; Zimmer, D. Konstruktionsregeln für additiv gefertigte Partikeldämpfer/Design rules for additive manufactured particle dampers. Konstruktion 2021, 73, 72–78, doi:https://doi.org/10.37544/0720-5953-2021-11-12-72.

48.

Vogel, F.A.; Berger, S.; Özkaya, E.; Biermann, D. Vibration Suppression in Turning TiAl6V4 Using Additively Manufactured Tool Holders with Specially Structured, Particle Filled Hollow Elements. Procedia Manufacturing 2019, 40, 32–37, doi:https://doi.org/10.1016/j.promfg.2020.02.007.

49.

Ehlers, T.; Lachmayer, R. Design of a Motorcycle Triple Clamp Optimised for Stiffness and Damping. In Proceedings of the Munich Symposium on Lightweight Design 2020; Pfingstl, S., Horoschenkoff, A., Höfer, P., Zimmermann, M., Eds.; Springer Berlin Heidelberg: Berlin, Heidelberg, 2021; pp 1–17, doi:https://doi.org/10.1007/978-3-662-63143-0_1.

50.

Ganter, N.V.; Ehlers, T.; Gembarski, P.C.; Lachmayer, R. ADDITIVE REFURBISHMENT OF A VIBRATION-LOADED STRUCTURAL COMPONENT. Proc. Des. Soc. 2021, 1, 345–354, doi:https://doi.org/10.1017/pds.2021.35.

51.

Simone Andresen. Untersuchung von Eigenschwingung und Leichtbaupotenzial unterschiedlicher Gitterstrukturen am Beispiel von Magnetuntergestellen von Teilchenbeschleunigern. In NAFEMS DACH Regional Conference, 2018.

52.

Andresen, S.; Bäger, A.; Hamm, C. Eigenfrequency maximisation by using irregular lattice structures. Journal of Sound and Vibration 2020, 465, 115027, doi:https://doi.org/10.1016/j.jsv.2019.115027.

53.

Cheng, L.; Liang, X.; Belski, E.; Wang, X.; Sietins, J.M.; Ludwick, S.; To, A. Natural Frequency Optimization of Variable-Density Additive Manufactured Lattice Structure: Theory and Experimental Validation. Journal of Manufacturing Science and Engineering 2018, 140, doi:https://doi.org/10.1115/1.4040622.

54.

Koopmann, J. Multimaterialdruck von integrierten elektrischen Strukturen mittels selektivem Laserschmelzen. Dissertation; Kassel University Press GmbH, 2019.

55.

Rudolph, J.; Lorenz, F.; Werner, R. Herstellung elektrischer Motoren mittels 3D-Multimaterialdruck. awIC 2018, 3, doi:https://doi.org/10.14464/awic.v3i0.275.

56.

Binder, M.; Anstaett, C.; Reisch, R.; Schlick, G.; Seidel, C.; Reinhart, G. Automated Manufacturing of Mechatronic Parts by Laser-Based Powder Bed Fusion. Procedia Manufacturing 2018, 18, 12–19, doi:https://doi.org/10.1016/j.promfg.2018.11.002.

57.

Abt, M.; Roch, A.; Qayyum, J.A.; Pestotnik, S.; Stepien, L.; Abu-Ageel, A.; Wright, B.; Ulusoy, A.C.; Albrecht, J.; Harle, L.; et al. Aerosol-Printed Highly Conductive Ag Transmission Lines for Flexible Electronic Devices. IEEE Trans. Compon., Packag. Manufact. Technol. 2018, 8, 1838–1844, doi:https://doi.org/10.1109/TCPMT.2018.2869977.

58.

Wang, G.; Cheng, T.; Do, Y.; Yang, H.; Tao, Y.; Gu, J.; An, B.; Yao, L. Printed Paper Actuator. In Proceedings of the 2018 CHI Conference on Human Factors in Computing Systems. CHI '18: CHI Conference on Human Factors in Computing Systems, Montreal QC Canada, 21 04 2018 26 04 2018; Mandryk, R., Hancock, M., Perry, M., Cox, A., Eds.; ACM: New York, NY, USA, 2018; pp 1–12, doi:https://doi.org/10.1145/3173574.3174143.

59.

Urbanek, S.; Ponick, B.; Taube, A.; Hoyer, K.-P.; Schaper, M.; Lammers, S.; Lieneke, T.; Zimmer, D. Additive Manufacturing of a Soft Magnetic Rotor Active Part and Shaft for a Permanent Magnet Synchronous Machine. In 2018 IEEE Transportation Electrification Conference and Expo (ITEC). 2018 IEEE Transportation Electrification Conference and Expo (ITEC), Long Beach, CA, USA, 13–15 Jun. 2018; IEEE, 2018; pp 668–674, doi:https://doi.org/10.1109/ITEC.2018.8450250.

60.

Ziebehl, A.; Biermann, T.; Grabe, T.; Röttger, J.; Ley, P.-P.; Wolf, A.; Lachmayer, R. Potentials and Challenges in Additive Manufacturing of Nanoparticle-infused Silicone Optics, 2021.

61.

Sung-Yueh Wu; Chen Yang; Wensyang Hsu; Liwei Lin. RF wireless lc tank sensors fabricated by 3D additive manufacturing. 2015 Transducers – 2015 18th International Conference on Solid-State Sensors, Actuators and Microsystems (TRANSDUCERS) 2015, 2208–2211.

62.

Momeni, F.; M.Mehdi Hassani.N, S.; Liu, X.; Ni, J. A review of 4D printing. Materials & Design 2017, 122, 42–79, doi:https://doi.org/10.1016/j.matdes.2017.02.068.

63.

Tibbits, S. 4D Printing: Multi-Material Shape Change. Archit Design 2014, 84, 116–121, doi:https://doi.org/10.1002/ad.1710.

64.

Khademhosseini, A.; Langer, R. A decade of progress in tissue engineering. Nat. Protoc. 2016, 11, 1775–1781, doi:https://doi.org/10.1038/nprot.2016.123.

65.

Zarek, M.; Mansour, N.; Shapira, S.; Cohn, D. 4D Printing of Shape Memory-Based Personalized Endoluminal Medical Devices. Macromol. Rapid Commun. 2017, 38, doi:https://doi.org/10.1002/marc.201600628.

66.

Taylor, D.L.; Het Panhuis, M. in. Self-Healing Hydrogels. Adv. Mater. 2016, 28, 9060–9093, doi:https://doi.org/10.1002/adma.201601613.

67.

Zolfagharian, A.; Kaynak, A.; Kouzani, A. Closed-loop 4D-printed soft robots. Materials & Design 2020, 188, 108411, doi:https://doi.org/10.1016/j.matdes.2019.108411.

68.

Dolce, M.; Cardone, D. Theoretical and Experimental Studies for the Application of Shape Memory Alloys in Civil Engineering. Journal of Engineering Materials and Technology 2006, 128, 302–311, doi:https://doi.org/10.1115/1.2203106.

69.

Gustmann, T.; Schwab, H.; Kühn, U.; Pauly, S. Selective laser remelting of an additively manufactured Cu-Al-Ni-Mn shape-memory alloy. Materials & Design 2018, 153, 129–138, doi:https://doi.org/10.1016/j.matdes.2018.05.010.

70.

Kim, J.; Yoo, D.-J. 3D printed compact heat exchangers with mathematically defined core structures. Journal of Computational Design and Engineering 2020, 7, 527–550, doi:https://doi.org/10.1093/jcde/qwaa032.

71.

Niknam, S.A.; Mortazavi, M.; Li, D. Additively manufactured heat exchangers: a review on opportunities and challenges. Int J Adv Manuf Technol 2021, 112, 601–618, doi:https://doi.org/10.1007/s00170-020-06372-w.

72.

Scheithauer, U.; Kordaß, R.; Noack, K.; F. Eichenauer, M.; Hartmann, M.; Abel, J.; Ganzer, G.; Lordick, D. Potentials and Challenges of Additive Manufacturing Technologies for Heat Exchanger. In Advances in Heat Exchangers; Castro Gómez, L., Manuel Velázquez Flores, V., Eds.; IntechOpen, 2019, doi:https://doi.org/10.5772/intechopen.80010.

73.

Wang, G.; Gu, Y.; Zhao, L.; Xuan, J.; Zeng, G.; Tang, Z.; Sun, Y. Experimental and numerical investigation of fractal-tree-like heat exchanger manufactured by 3D printing. Chemical Engineering Science 2019, 195, 250–261, doi:https://doi.org/10.1016/j.ces.2018.07.021.

74.

Schneck, M.; Horn, M.; Schindler, M.; Seidel, C. Capability of Multi-Material Laser-Based Powder Bed Fusion—Development and Analysis of a Prototype Large Bore Engine Component. Metals 2022, 12, 44, doi:https://doi.org/10.3390/met12010044.

75.

Shinde, M.S.; Ashtankar, K.M. Additive manufacturing–assisted conformal cooling channels in mold manufacturing processes. Advances in Mechanical Engineering 2017, 9, 168781401769976, doi:https://doi.org/10.1177/1687814017699764.

76.

Armillotta, A.; Baraggi, R.; Fasoli, S. SLM tooling for die casting with conformal cooling channels. Int J Adv Manuf Technol 2014, 71, 573–583, doi:https://doi.org/10.1007/s00170-013-5523-7.

77.

Belgiorno, G.; Boscolo, A.; Dileo, G.; Numidi, F.; Pesce, F.C.; Vassallo, A.; Ianniello, R.; Beatrice, C.; Di Blasio, G. Experimental Study of Additive-Manufacturing-Enabled Innovative Diesel Combustion Bowl Features for Achieving Ultra-Low Emissions and High Efficiency. SAE Int. J. Adv. & Curr. Prac. in Mobility 2021, 3, 672–684, doi:https://doi.org/10.4271/2020-37-0003.

78.

Grabe, T.; Budde, J.; Kranert, F.; Wienke, A.; Neumann, J.; Kracht, D.; Lachmayer, R. Kühlkörper-Designansatz für einen in AlSi10Mg eingebetteten YAG-Laserkristall. In Konstruktion für die Additive Fertigung 2019; Lachmayer, R., Rettschlag, K., Kaierle, S., Eds.; Springer Berlin Heidelberg: Berlin, Heidelberg, 2020; pp 159–175, doi:https://doi.org/10.1007/978-3-662-61149-4_11.

79.

Binder, M.; Anstaett, C.; Herzer, F.; Horn, M.; Schlick, G.; Schilp, J.; Reinhart, G. POTENTIALS AND CHALLENGES OF MULTI-MATERIAL PROCESSING BY LASER-BASED POWDER BED FUSION. In Solid Freeform Fabrication 2018: Proceedings of the 29th Annual International Solid Freeform Fabrication Symposium – An Additive Manufacturing Conference, Austin, Texas, USA, August 13–15, 2018, 2018.

80.

Fu, W.; Haberland, C.; Klapdor, E.V.; Rule, D.; Piegert, S. Streamlined frameworks for advancing metal based additive manufacturing technologies. J. Glob. Power Propuls. Soc. 2018, 2, QJLS4L, doi:https://doi.org/10.22261/JGPPS.QJLS4L.

81.

Walachowicz, F.; Bernsdorf, I.; Papenfuss, U.; Zeller, C.; Graichen, A.; Navrotsky, V.; Rajvanshi, N.; Kiener, C. Comparative Energy, Resource and Recycling Lifecycle Analysis of the Industrial Repair Process of Gas Turbine Burners Using Conventional Machining and Additive Manufacturing. Journal of Industrial Ecology 2017, 21, S203-S215, doi:https://doi.org/10.1111/jiec.12637.

82.

Zhang, Y.-F.; Zhang, N.; Hingorani, H.; Ding, N.; Wang, D.; Yuan, C.; Zhang, B.; Gu, G.; Ge, Q. Fast‐Response, Stiffness‐Tunable Soft Actuator by Hybrid Multimaterial 3D Printing. Adv. Funct. Mater. 2019, 29, 1806698, doi:https://doi.org/10.1002/adfm.201806698.

83.

Additive Fertigung von Bauteilen und Strukturen; Richard, H.A.; Schramm, B.; Zipsner, T., Eds.; Springer Fachmedien Wiesbaden: Wiesbaden, 2017, doi:https://doi.org/10.1007/978-3-658-17780-5.

84.

Da Silva de Siqueira, R.; Mozgova, I.; Lachmayer, R. An interfacial zone evolutionary optimization method with manufacturing constraints for hybrid components. Journal of Computational Design and Engineering 2019, 6, 387–397, doi:https://doi.org/10.1016/j.jcde.2018.10.003.

85.

Bendsøe, M.P.; Sigmund, O. Topology Optimization: Theory, Methods, and Applications; Springer Berlin Heidelberg: Berlin, Heidelberg, 2004, ISBN 978–3–642–07698–5.

86.

Barron, R.F.; Barron, B.R. Design for Thermal Stresses; Wiley, 2011, ISBN 9780470627693.

87.

Rodrigues, H.; Fernandes, P. A material based model for topology optimization of thermoelastic structures. Int. J. Numer. Meth. Engng. 1995, 38, 1951–1965, doi:https://doi.org/10.1002/nme.1620381202.MathSciNetMATH

88.

Deaton, J.D.; Grandhi, R.V. Topology Optimization of Thermal Structures with Stress Constraints. In 54th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference. 54th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, Boston, Massachusetts; American Institute of Aeronautics and Astronautics: Reston, Virginia, 2013, doi:https://doi.org/10.2514/6.2013-1466.

89.

Haney, M.A. Topology Optimization of Engine Exhaust-Washed Structures; Wright State University, Ohio, 2006.

90.

Caivano, R.; Tridello, A.; Codegone, M.; Chiandussi, G. A new methodology for thermostructural topology optimization: Analytical definition and validation. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications 2021, 235, 481–500, doi:https://doi.org/10.1177/1464420720970246.

91.

Song, L.; Gao, T.; Tang, L.; Du, X.; Zhu, J.; Lin, Y.; Shi, G.; Liu, H.; Zhou, G.; Zhang, W. An all-movable rudder designed by thermo-elastic topology optimization and manufactured by additive manufacturing. Computers & Structures 2021, 243, 106405, doi:https://doi.org/10.1016/j.compstruc.2020.106405.

92.

Thivillon, L.; Bertrand, P.; Laget, B.; Smurov, I. Potential of direct metal deposition technology for manufacturing thick functionally graded coatings and parts for reactors components. Journal of Nuclear Materials 2009, 385, 236–241, doi:https://doi.org/10.1016/j.jnucmat.2008.11.023.

93.

Vaezi, M.; Chianrabutra, S.; Mellor, B.; Yang, S. Multiple material additive manufacturing – Part 1: a review. Virtual and Physical Prototyping 2013, 8, 19–50, doi:https://doi.org/10.1080/17452759.2013.778175.

94.

Bandyopadhyay, A.; Heer, B. Additive manufacturing of multi-material structures. Materials Science and Engineering: R: Reports 2018, 129, 1–16, doi:https://doi.org/10.1016/j.mser.2018.04.001.

95.

Anstaett, C.; Seidel, C.; Reinhart, G. Fabrication of 3D-Multi-Material Parts by Laser Beam Based Powder Bed Fusion. In International Solid Freeform Fabrication Symposium, 2017; pp 1548–1556.

96.

Wei, C.; Zhang, Z.; Cheng, D.; Sun, Z.; Zhu, M.; Li, L. An overview of laser-based multiple metallic material additive manufacturing: from macro- to micro-scales. Int. J. Extrem. Manuf. 2021, 3, 12003, doi:https://doi.org/10.1088/2631-7990/abce04.

97.

Göpfert, J. Modularisierung von Technik und Organisation in der Produktentwicklung. In Modulare Produktentwicklung; Göpfert, J., Ed.; Deutscher Universitätsverlag: Wiesbaden, 1998; pp 59–203, doi:https://doi.org/10.1007/978-3-663-08152-4_3.

98.

Ganter, N.V.; Bode, B.; Gembarski, P.C.; Lachmayer, R. METHOD FOR UPGRADING A COMPONENT WITHIN REFURBISHMENT. Proc. Des. Soc. 2021, 1, 2057–2066, doi:https://doi.org/10.1017/pds.2021.467.

99.

The Biomimicry Institute. Ask Nature. Available online: http://www.asknature.org (accessed on 8 March 2022).

100.

Valjak, F.; Bojčetić, N. Conception of Design Principles for Additive Manufacturing. Proc. Int. Conf. Eng. Des. 2019, 1, 689–698, doi:https://doi.org/10.1017/dsi.2019.73.

101.

Watschke, H.; Kuschmitz, S.; Heubach, J.; Lehne, G.; Vietor, T. A Methodical Approach to Support Conceptual Design for Multi-Material Additive Manufacturing. Proc. Int. Conf. Eng. Des. 2019, 1, 659–668, doi:https://doi.org/10.1017/dsi.2019.70.

102.

Weiss, F.; Binz, H.; Roth, D. Conception of a design catalogue for the development of functionalities with additive manufacturing. In DS 85–2: Proceedings of NordDesign 2016, Volume 2, Trondheim, Norway, 10th – 12th August 2016; Boks, C., Sigurjonsson, J., Steinert, M., Vis, C., Wulvik, A., Eds.; pp 2–11.

103.

Blösch Klein, A. Design Heuristics for Additive Manufacturing; ETH Zurich, 2020, doi:https://doi.org/10.3929/ethz-b-000412677.

104.

Schumacher, A. Optimierung mechanischer Strukturen: Grundlagen und industrielle Anwendungen; Springer: Berlin, Heidelberg, 2005, ISBN 978-3-540-21887-6.

105.

Müller-Wilderink, H.; Siqueira, R.; Lippert, B.; Lachmayer, R. Funktions- & Gestaltoptimierung der Pedalerie eines Elektrofahrzeuges für SLM. In Konstruktion für die Additive Fertigung 2019; Lachmayer, R., Rettschlag, K., Kaierle, S., Eds.; Springer Berlin Heidelberg: Berlin, Heidelberg, 2020; pp 105–119, doi:https://doi.org/10.1007/978-3-662-61149-4_8.

Title: Kreative Methoden
Authors: Roland Lachmayer
Tobias Ehlers
Rene Bastian Lippert
Publisher: Springer Berlin Heidelberg
Book: Entwicklungsmethodik für die Additive Fertigung
Print ISBN: 978-3-662-65923-6

Electronic ISBN: 978-3-662-65924-3

Copyright Year: 2022
DOI: https://doi.org/10.1007/978-3-662-65924-3_4

Springer Professional

Zusammenfassung

Please log in to get access to your license.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Springer Professional "Wirtschaft"

Premium Partners