Top

Optical and Quantum Electronics

Published in:

01-04-2024

Laser ablation and LIPSS formation at static and dynamic multi-pulse regime on protective Al₂O₃/TiAlN coating

Authors: B. Gaković, M. Zamfirescu, P. Panjan, C. Luculescu, C. Albu, S. Petrović

Published in: Optical and Quantum Electronics | Issue 4/2024

Activate our intelligent search to find suitable subject content or patents.

search-config

AI-assisted search

Off

Abstract

The study of ablation and the laser-induced periodic surface structure (LIPSS) creation during the static and dynamic ultrafast laser (UFL) processing of the Al₂O₃/TiAlN protective coating is reported. The static irradiation was done with 10 successive pulses while scanning irradiation was performed with sample scanning. The laser ablation was studied by analysis of the surface morphology and elemental composition. The selective ablations manifest as circular craters or lines/micro-channels. The borders are very sharp without debris and hydrodynamic features. LIPSSs were formed at the bottoms of craters and microchannels. The periodicity of the created LIPSSs has shown a trend of increase with the pulse energy. Depending on the applied laser fluence the elemental composition in the centre of the craters confirmed the complete removal of the Al₂O₃ layer and partial ablation of the second TiAlN. The Al₂O₃ layer and part of TiAlN were ablated in micro-channels too.

previous article Accuracy evaluation of sports training actions based on grating ruler displacement sensor and joint recognition algorithm

next article Artificial intelligence and IoT based optical quantum computing application legal implications in privacy and regulatory analysis

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Wirtschaft"

Online-Abonnement

Mit Springer Professional "Wirtschaft" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 340 Zeitschriften

aus folgenden Fachgebieten:

Bauwesen + Immobilien
Business IT + Informatik
Finance + Banking
Management + Führung
Marketing + Vertrieb
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Bobzin, K., Brogelmann, T., Kruppe, N.C., Janowitz, J.: Smart PVD hard coatings with temperature sensor function. Surface Coati. Techno., 423, 127631 (2021)

Bonse, J., Kirner, S.V., Krüge,J.: Laser-induced periodic surface structures, chapter in handbook of laser micro- and nano-engineering. In: Sugioka, K. (ed) (2021). https://doi.org/10.1007/978-3-319-69537-2.

Bonse, J., Ten, G.S.: open questions about laser-induced periodic surface structures. Nanomaterials 11, 3326 (2021). https://doi.org/10.3390/nano11123326CrossRefPubMedPubMedCentral

Esmail, I., Sarvestani, H.Y., Gholipour, J., Ashrafi, B.: Engineered net shaping of alumina ceramics using picosecond laser. Opti. Laser Technol. 135, 106669 (2021). https://linkinghub.elsevier.com/retrieve/pii/S0030399220313025 .

Farid, N., Chan, H., Milne, D., Brunton, A., O’Connor, G.M.: Stress assisted selective ablation of ITO thin film by picosecond laser. Appl. Surf. Sci. 427, 499–550 (2018). https://doi.org/10.1016/j.apsusc.2017.08.232ADSCrossRef

Gaković, B., Radak, B., Radu, C., Zamfirescu, M., Trtica, M., Petrović, S., Stašić, J., Panjan, P., Mihailescu, I.N.: Selective single pulse femtosecond laser removal of alumina (Al₂O₃) from a Bilayered Al₂O₃/TiAlN/Steel Coating. Surface Coatings Technol. 206, 5080–5084 (2012). https://linkinghub.elsevier.com/retrieve/pii/S0257897212005798.

Huang, Q., et al.: Recent progress on surface texturing and solid lubricants in tribology: Designs, properties, and mechanisms. Mater. Today Commun. 35, 105854 (2023). https://doi.org/10.1016/j.mtcomm.2023.105854CrossRef

Ionin, A.A., Kudryashov, S.I., Samokhin, A.A.: Material surface ablation produced by ultrashort laser pulses. Physics Uspekhi 60, 149–160 (2017). https://doi.org/10.3367/UFNe.2016.09.037974ADSCrossRef

Han Jide, Malek, O., Vleugels, J., Braem, A., Castagne, S.: Ultrafast laser selective phase removal for surface modification of nanocomposite materials. Opt. Express 29, 24834 (2021). https://opg.optica.org/abstract.cfm?URI=oe-29-16-24834.

Karim, W., Petit, A., Millon, E., Vulliet, J., Tabbal, M., Thomann, A., Semmar, N.: Nano-squares and regular LIPSS on YSZ coating by picosecond UV laser beam: Thin film mediated and direct texturing. Appl. Surf. Sci. 623, 157110 (2023). https://doi.org/10.1016/j.apsusc.2023.157110CrossRef

Kim, S. H. et al.: Ablation characteristics of aluminum oxide and nitride ceramics during femtosecond laser micromachining. Appl Surface Sci. 255, 9717–9720 (2009). https://doi.org/10.1016/j.apsusc.2009.04.058.

Korhonen, H., Syväluoto, A., Leskinen, J.T.T., Lappalainen, R.: Optically transparent and durable Al₂O₃ coatings for harsh environments by ultra short pulsed laser deposition. Opt. Laser Technol. 98, 373–384 (2018)ADSCrossRef

Lizarraga-Medina, E.G., Castillo, G.R., Jurado, J.A., Caballero-Espitia, D.L., Camacho-Lopez, S., Contreras, O., Santillan, R., Marquez, H., Tiznado, H.: Optical waveguides fabricated in atomic layer deposited Al₂O₃ by ultrafast laser ablation. Results Opt.s 2, 100060 (2021). https://doi.org/10.1016/j.rio.2021.100060CrossRef

Mwema, F.M., Oladijo, O.P., Akinlabi, S.A., Akinlabi, E.T.: Properties of physically deposited thin aluminium film coatings: a review. J. Alloys Comp. 747, 306–323 (2018). Accessed March 24, 2023. https://linkinghub.elsevier.com/retrieve/pii/S0925838818308570 .

Perrie, W., Rushton, A., Gill, M., Fox, P., O’Neill., W.: Femtosecond laser micro-structuring of alumina ceramic. Appl. Surface Sci. 248, 213–217 (2005). https://linkinghub.elsevier.com/retrieve/pii/S0169433205003806.

Petrović, S., Peruško, D., Kovač, J., Panjan, P., Mitrić, M., Pjević, D., Kovačević, A., Jelenković, B.: Design of co-existence parallel periodic surface structure induced by picosecond laser pulses on the Al/Ti multilayers. J. Appl. Phys. 122, 115302 (2017). https://doi.org/10.1063/1.4985830ADSCrossRef

Rakshit, R., Das, A.K.: A review on cutting of industrial ceramic materials. Precis. Eng. 59, 90–109 (2019). https://doi.org/10.1016/j.precisioneng.2019.05.009CrossRef

Shugaev, M., et al.: Fundamentals of ultrafast laser–material interaction. MRS Bull. 41, 960–968 (2016). https://doi.org/10.1557/mrs.2016.274ADSCrossRef

Stasić, J., Gaković, B., Perrie, W., Watkins, K., Petrović, S., Trtica, M.: Surface texturing of the carbon steel AISI 1045 using femtosecond laser in single pulse and scanning regime. Appl. Surf. Sci. 258, 290–296 (2011). https://doi.org/10.1016/j.apsusc.2011.08.052ADSCrossRef

Talbi, A., Coddet, P., Tabbal, M., Thomann, A.L., Millon, E., Stolz, A., Boulmer-Leborgne, C., O'Connor, G.M., Semmar, N.: Comparative study of laser induced periodic surface structures formed on pulsed laser deposited and magnetron sputtered titanium oxide films. Appl. Surface Sci., 476, 303–307 (2019). https://doi.org/10.1016/j.apsusc.2019.01.069

Vishnoi, M., Kumar, P., Murtaza, Q.: Surface texturing techniques to enhance tribological performance: a review. Surfaces Interfaces, 27, 101463 (2021). Accessed April 1, 2023. https://linkinghub.elsevier.com/retrieve/pii/S246802302100540X.

Wang, X.C., Zheng, H.Y., Chu P.L., Tan, J.L., Teh, K.M., Liu, T., Bryden C.Y. A., Tay, G.H.: High quality femtosecond laser cutting of alumina substrates. Opt. Lasers Eng. 48, 657–663 (2010). https://linkinghub.elsevier.com/retrieve/pii/S0143816610000230 .

Weixler, J., Zweifel, M., Wegener, K.: 300 fs pulsed laser ablation of Al₂O₃ ceramic and introduction of a predictive model. Mater. Des. 217, 110614 (2022). https://doi.org/10.1016/j.matdes.2022.110614CrossRef

Zamfirescu, M., Dinescu, A., Danila, M., Socol, G., Radu, C.: The role of the substrate material type in formation of laser induced periodical surface structures on ZnO thin films. Appl. Surf. Sci. 258, 9385–9388 (2012). https://doi.org/10.1016/j.apsusc.2012.01.089ADSCrossRef

Title: Laser ablation and LIPSS formation at static and dynamic multi-pulse regime on protective Al2O3/TiAlN coating
Authors: B. Gaković
M. Zamfirescu
P. Panjan
C. Luculescu
C. Albu
S. Petrović
Publication date: 01-04-2024
Publisher: Springer US
Published in: Optical and Quantum Electronics / Issue 4/2024
Print ISSN: 0306-8919
Electronic ISSN: 1572-817X
DOI: https://doi.org/10.1007/s11082-023-06238-x

Springer Professional

Abstract

Please log in to get access to your license.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Technik"

Springer Professional "Wirtschaft+Technik"

Springer Professional "Wirtschaft"

Other articles of this Issue 4/2024

Additional investigation of the Biswas–Arshed equation to reveal optical soliton dynamics in birefringent fiber

Synthesis and unraveling the optical and electronic characteristics of PVA/Co2O3/Fe2O3 hybrid nanostructures for promising nanoelectronics and photonics applications

Lie vector fields, conservation laws, bifurcation analysis, and Jacobi elliptic solutions to the Zakharov–Kuznetsov modified equal-width equation

Design of all-optical AND gate based on a hybrid photonic crystal and plasmonic structure

Quantum-enhanced cybersecurity analysis and medical image encryption in cloud IoT networks

Fuzzy Logic-enabled Autonomous IoT Systems for proactive maintenance in industry 4.0 digital twin scenarios