Top

Published in:

01-03-2022 | Research paper

Luminescent properties of metal–organic frameworks embedded in methacrylated gelatin for its application in biocompatible 3D printable materials

Authors: Karla Gómez-Lizárraga, Ismael Garduño-Wilches, Jorge Narro-Ríos, Cristina Piña-Barba, Miguel Aguilar-Frutis, Gilberto Alarcón-Flores

Published in: Journal of Nanoparticle Research | Issue 3/2022

Activate our intelligent search to find suitable subject content or patents.

search-config

AI-assisted search

Off

Abstract

In this work, nanoparticles of a luminescent metal–organic framework were embedded in a photopolymerized methacrylated gelatin. Steady-state and time-resolved luminescence spectroscopy was used to explore the drying and the photopolymerization processes, as well as the effect the methacrylated gelatin had on the quantum yield and decay time of the nanoparticles. A drying time of 27.5 min was needed for a 20 µL droplet, and the proposed intensity ratio analysis resulted in a minimum irradiation time of 18.6 min, at a lamp intensity of 2.7 W/m², for the photopolymerization process to end. The presence of the methacrylated gelatin decreased the quantum yield of the nanoparticles and influenced the emission decay time. The intensity ratio showed that a concentration between 1 and 3% w/V of nanoparticles in the solution is required for the luminescence to be observed and to avoid the important quenching effect.

Graphical abstract

previous article Improvement of hydrogen production performance by in situ doping of carbon nanotubes into TiO2 materials

next article Enhancement of radiation response of breast cancer cells through the incorporation of Bi2S3 nanorods

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

inform now

Available only for authorised users

Ngo TD, Kashani A, Imbalzano G, et al. Additive manufacturing (3D printing): a review of materials, methods, applications and challenges. Compos. Part B Eng. [Internet]. 2018;143:172–196. Available from: https://doi.org/10.1016/j.compositesb.2018.02.012.

Mazurchevici AD, Nedelcu D, Popa R (2020) Additive manufacturing of composite materials by FDM technology: a review. Indian J Eng Mater Sci 27:179–192

Kozior T, Kundera C. Evaluation of the influence of parameters of FDM technology on the selected mechanical properties of models. Procedia Eng. [Internet]. 2017;192:463–468. Available from: https://doi.org/10.1016/j.proeng.2017.06.080.

Charoo NA, Barakh Ali SF, Mohamed EM, et al. Selective laser sintering 3D printing–an overview of the technology and pharmaceutical applications. Drug Dev. Ind. Pharm. [Internet]. 2020;46:869–877. Available from: https://doi.org/10.1080/03639045.2020.1764027.

Jasiuk I, Abueidda DW, Kozuch C, et al. An overview on additive manufacturing of polymers. Jom [Internet]. 2018;70:275–283. Available from: https://doi.org/10.1007/s11837-017-2730-y.

Shahrubudin N, Lee TC, Ramlan R. An overview on 3D printing technology: technological, materials, and applications. Procedia Manuf. [Internet]. 2019;35:1286–1296. Available from: https://doi.org/10.1016/j.promfg.2019.06.089.

Jyothish Kumar L, Krishnadas Nair CG. Current trends of additive manufacturing in the aerospace industry. In: D. W, P. P, L. K, editors. Adv. 3D Print. Addit. Manuf. Technol. Springer Singapore; 2017. p. 39–54.

Nichols MR. How does the automotive industry benefit from 3D metal printing? Met. Powder Rep. [Internet]. 2019;74:257–258. Available from: https://doi.org/10.1016/j.mprp.2019.07.002.

Phung SC, Zhu Q, Plevniak K, et al. 3D printed microfluidic devices and applications. In: Xiujum L, Zhou Y, editors. Microfluid. Devices Biomed. Appl. Second Edi. Woodhead Publishing; 2021. p. 659–679.

Ford S, Minshall T. Invited review article: where and how 3D printing is used in teaching and education. Addit. Manuf. [Internet]. 2019;25:131–150. Available from: https://doi.org/10.1016/j.addma.2018.10.028.

Garcia J, Yang ZL, Mongrain R et al (2018) 3D printing materials and their use in medical education: a review of current technology and trends for the future. BMJ Simul Technol Enhanc Learn 4:27–40CrossRef

Palmara G, Frascella F, Roppolo I, et al. Functional 3D printing: approaches and bioapplications. Biosens. Bioelectron. 2021;175.

Bozkurt Y, Karayel E. 3D printing technology; methods, biomedical applications, future opportunities and trends. J. Mater. Res. Technol. [Internet]. 2021;14:1430–1450. Available from: https://doi.org/10.1016/j.jmrt.2021.07.050.

Wang J, Mubarak S, Dhamodharan D, et al. Fabrication of thermoplastic functionally gradient composite parts with anisotropic thermal conductive properties based on multicomponent fused deposition modeling 3D printing. Compos. Commun. [Internet]. 2020;19:142–146. Available from: https://doi.org/10.1016/j.coco.2020.03.012.

Singh S, Ramakrishna S, Berto F (2020) 3D Printing of polymer composites: a short review. Mater Des Process Commun 2:1–13

Singh B, Kumar R, Chohan JS. Polymer matrix composites in 3D printing: a state of art review. Mater. Today Proc. [Internet]. 2019;33:1562–1567. Available from: https://doi.org/10.1016/j.matpr.2020.04.335.

Ronda C (2017) Rare-earth phosphors: fundamentals and applications ☆. Elsevier, Ref. Modul. Mater. Sci. Mater. Eng

Noto LL, Mofokeng SJ, Molefe F V., et al. Luminescent dynamics of rare earth-doped CaTiO3 phosphors. In: Dhoble SJ, Pawade VB, Swart HC, et al., editors. Spectrosc. Lanthan. Doped Oxide Mater. [Internet]. Elsevier Ltd.; 2019. p. 57–86. Available from: https://doi.org/10.1016/B978-0-08-102935-0.00003-4.

Furukawa H, Cordova KE, O’Keeffe M, et al. The chemistry and applications of metal-organic frameworks. Science (80-. ). 2013;341.

Kumar P, Deep A, Kim KH. Metal organic frameworks for sensing applications. TrAC - Trends Anal. Chem. [Internet]. 2015;73:39–53. Available from: https://doi.org/10.1016/j.trac.2015.04.009.

Wang F, Chong Y, Wang FK et al (2017) Photopolymer resins for luminescent three-dimensional printing. J Appl Polym Sci 134:1–8

Liu C, Qian B, Ni R et al (2018) 3D printing of multicolor luminescent glass. RSC Adv 8:31564–31567CrossRef

Rimpongpisarn T, Wattanathana W, Sukthavorn K, et al. Novel luminescent PLA/MgAl2O4:Sm3+ composite filaments for 3D printing application. Mater. Lett. [Internet]. 2019;237:270–273. Available from: https://doi.org/10.1016/j.matlet.2018.11.066.

Wan M, Jiang X, Nie J et al (2020) Phosphor powders-incorporated polylactic acid polymeric composite used as 3D printing filaments with green luminescence properties. J Appl Polym Sci 137:1–10CrossRef

Dann T, Raphel J, Gammon ST, et al. Anatase titanium dioxide imparts photoluminescent properties to PA2200 commercial 3D printing material to generate complex optical imaging phantoms. Materials (Basel). 2021.

Tao S, Zhu S, Feng T et al (2020) Crosslink-enhanced emission effect on luminescence in polymers: advances and perspectives. Angew Chemie 132:9910–9924CrossRef

Pei R, Fan L, Zhao F, et al. 3D-Printed metal-organic frameworks within biocompatible polymers as excellent adsorbents for organic dyes removal. J. Hazard. Mater. [Internet]. 2020;384:121418. Available from: https://doi.org/10.1016/j.jhazmat.2019.121418.

Garduño-Wilches IA, Alarcón-Flores G, Carro-Gastélum A, et al. Enhanced photoluminescence quantum yield of terbium nano-MOFs synthesized by microwave assisted solvothermal method. Nano-Structures & Nano-Objects [Internet]. 2021;26:100736. Available from: https://www.sciencedirect.com/science/article/pii/S2352507X21000378.

Alarcón-Flores G, García-Hipólito M, Aguilar-Frutis M et al (2014) Luminescent and structural characteristics of Y 2 O 3: Tb 3+ thin films as a function of substrate temperature. ECS J Solid State Sci Technol 3:R189–R194CrossRef

Liu WG, De YK, Wang GC et al (2000) Intrinsic fluorescence investigation on the change in conformation of cross-linked gelatin gel during volume phase transition. Polymer (guildf) 41:7589–7592CrossRef

Oujja M, Rebollar E, Abrusci C et al (2007) UV, visible and IR laser interaction with gelatine. J Phys Conf Ser 59:571–574CrossRef

Gong J, Schuurmans CCL, Van Genderen AM, et al. Complexation-induced resolution enhancement of 3D-printed hydrogel constructs. Nat. Commun. 2020;11.

Dobretsov GE, Syrejschikova TI, Smolina N V. On mechanisms of fluorescence quenching by water. Biophys. (Russian Fed. 2014;59:183–188.

Pignataro MF, Herrera MG, Dodero VI. Evaluation of peptide/protein self-assembly and aggregation by spectroscopic methods. Molecules [Internet]. 2020 [cited 2021 Jun 30]; Available from: www.mdpi.com/journal/molecules.

Mahmoud KH, Abbo M. Synthesis, characterization and optical properties of gelatin doped with silver nanoparticles. Spectrochim. Acta - Part A Mol. Biomol. Spectrosc. [Internet]. 2013;116:610–615. Available from: https://doi.org/10.1016/j.saa.2013.07.106.

Berdugo Vilches T, Weng W, Glarborg P, et al. Shedding light on the governing mechanisms for insufficient CO and H2 burnout in the presence of potassium, chlorine and sulfur. Fuel [Internet]. 2020;273:117762. Available from: https://doi.org/10.1016/j.fuel.2020.117762.

Chou SL, Lo JI, Peng YC et al (2019) Electronic and vibrational absorption spectra of NH2 in solid Ne. ACS Omega 4:2268–2274CrossRef

Ramsay DA. The absorption spectra of free NH and NH2 radicals produced by the flash photolysis of hydrazine. J. Phys. Chem. B. 1953;57:0–3.

Title: Luminescent properties of metal–organic frameworks embedded in methacrylated gelatin for its application in biocompatible 3D printable materials
Authors: Karla Gómez-Lizárraga
Ismael Garduño-Wilches
Jorge Narro-Ríos
Cristina Piña-Barba
Miguel Aguilar-Frutis
Gilberto Alarcón-Flores
Publication date: 01-03-2022
Publisher: Springer Netherlands
Published in: Journal of Nanoparticle Research / Issue 3/2022
Print ISSN: 1388-0764
Electronic ISSN: 1572-896X
DOI: https://doi.org/10.1007/s11051-022-05449-9

Springer Professional

Abstract

Graphical abstract

Please log in to get access to your license.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Other articles of this Issue 3/2022

Photocatalytic degradation efficiency of Cu/Cu2O core–shell structured nanoparticles for endosulfan mineralization

Research trends in nanofluid and its applications: a bibliometric analysis

Tuning the photocatalytic activity of ZnO nanoparticles by the annihilation of intrinsic defects provoked by the thermal annealing

Investigation of the bioactivity and fluorescence imaging of multicellular tumor spheroid targeted labelling with CdSe/ZnS quantum dots

Novel ultrasonic pretreatment for HTC carbon nanosphere size control without yield compromise

Structure, morphology, and luminescence properties of brilliant blue-green-emitting CdW : A and G phosphors for optical applications

Premium Partners