Top

Journal of Nanoparticle Research

Published in:

01-03-2022 | Research paper

Macro-prepared Cs₄PbBr₆/CsPbBr₃ perovskite screen printing inks

Authors: Rong Song, Ying Li, Jun Qian

Published in: Journal of Nanoparticle Research | Issue 3/2022

Activate our intelligent search to find suitable subject content or patents.

search-config

AI-assisted search

Off

Abstract

Perovskite has shown attractive optoelectronic performances and is a potential material in lighting, anti-counterfeiting, sensor, and other optoelectronic devices. Recently, spin-coating has been widely used in fabricating high-performance perovskite films, but it is difficult to process and apply in practice. In this paper, the CsPbBr₃/Cs₄PbBr₆ composite perovskite quantum dots with photoluminescence quantum yield of 36% and high storage stability were prepared by using room temperature ligand-assisted precipitation method and controlling the proportion of CsBr/PbBr₂. In addition, the composite perovskite was ground and dispersed in the inks system. After adjusting the composition and ratio of the resin components, the inks were suitable for screen printing with a viscosity of 2439 mPa•s, an initial dryness of 25 mm/30 s, and a thorough dryness of 100 s/100 μm. By printing, the perovskite films exhibited high coverage, strong green emission, and outstanding fluorescence recovery ability after exposure to water. Screen printing perovskite inks have the characteristic of being patternable, which provides a solution for preparing a perovskite film in the application.

previous article Targeting of sialoadhesin-expressing macrophages through antibody-conjugated (polyethylene glycol) poly(lactic-co-glycolic acid) nanoparticles

next article How can the unstable two-dimensional Sn2Bi be experimentally realized on Si(111)?

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

inform now

Akkerman QA, Abdelhady AL, Manna L (2018) Zero-dimensional cesium lead halides: history, properties, and challenges. J Phys Chem Lett 9(9):2326–2337. https://doi.org/10.1021/acs.jpclett.8b00572CrossRef

Cai J, Gu K, Zhu Y, Zhu J, Wang Y, Shen J, Trinchi A, Li C, Wei G (2018) Highly stable CsPbBr 3@SiO2 nanocomposites prepared via confined condensation for use as a luminescent ink. Chem Commun (camb) 54(58):8064–8067. https://doi.org/10.1039/c8cc04130jCrossRef

Choi SH, Kim BY, Kang BK, Kwon SB, Jeong HJ, Han GS, Kim WH, Kim JP, Yoon DH, Song YH (2021) Innovative rapid synthesis design of water-stable solid-state Cs4PbBr6 perovskite luminescence materials for next generation display technology. Appl Surf Sci 542https://doi.org/10.1016/j.apsusc.2020.148696

Dutta NS, Noel NK, Arnold CB (2020) Crystalline nature of colloids in methylammonium lead halide perovskite precursor inks revealed by cryo-electron microscopy. J Phys Chem Lett 11(15):5980–5986. https://doi.org/10.1021/acs.jpclett.0c01975CrossRef

Gan Z, Zheng F, Mao W, Zhou C, Chen W, Bach U, Tapping P, Kee TW, Davis JA, Jia B, Wen X (2019) The optical properties of Cs4PbBr 6-CsPbBr3 perovskite composites. Nanoscale 11(31):14676–14683. https://doi.org/10.1039/c9nr04787eCrossRef

Ge W, Shi J, Tian Y, Xu M, Wu Y, Li Y (2021) Core-shell CsPbBr3@Cs4PbBr6 nanocrystals dispersed in thermoplastic polyurethane as writeable heat-resistant fluorescent inks. J Alloys Compd 865. https://doi.org/10.1016/j.jallcom.2021.158768

Ghosh J, Hossain M, Giri PK (2020) Origin and tunability of dual color emission in highly stable Mn doped CsPbCl3 nanocrystals grown by a solid-state process. J Colloid Interface Sci 564:357–370. https://doi.org/10.1016/j.jcis.2019.12.066CrossRef

Huang K, Peng L, Liu B, Li D, Ma Q, Zhang M, Xie R, Wang D, Yang W (2018) Water-borne perovskite quantum dot-loaded, polystyrene latex ink. Front Chem 6:453. https://doi.org/10.3389/fchem.2018.00453CrossRef

Jiang G, Guhrenz C, Kirch A, Sonntag L, Bauer C, Fan X, Wang J, Reineke S, Gaponik N, Eychmuller A (2019) Highly LUMINESCENT AND WATER-RESISTANT CsPbBr 3-CsPb2Br5 perovskite nanocrystals coordinated with partially hydrolyzed poly(methyl methacrylate) and polyethylenimine. ACS Nano 13(9):10386–10396. https://doi.org/10.1021/acsnano.9b04179CrossRef

Jin G, Zhang D, Pang P, Ye Z, Liu T, Xing G, Chen J, Ma D (2021) Boosting the performance of CsPbBr 3-based perovskite light-emitting diodes via constructing nanocomposite emissive layers. J Mater Chem C 9(3):916–924. https://doi.org/10.1039/d0tc05227bCrossRef

Kang B, Biswas K (2018) Exploring polaronic, excitonic structures and luminescence in Cs4PbBr 6/CsPbBr3. J Phys Chem Lett 9(4):830–836. https://doi.org/10.1021/acs.jpclett.7b03333CrossRef

Kang CY, Lin CH, Lin CH, Li TY, Huang Chen SW, Tsai CL, Sher CW, Wu TZ, Lee PT, Xu X, Zhang M, Ho CH, He JH, Kuo HC (2019) Highly efficient and stable white light‐emitting diodes using perovskite quantum dot paper. Adv Sci 1902230. https://doi.org/10.1002/advs.201902230

Liang C, Li P, Gu H, Zhang Y, Li F, Song Y, Shao G, Mathews N, Xing G (2018) One‐step inkjet printed perovskite in air for efficient light harvesting. Solar RRL 2 (2). https://doi.org/10.1002/solr.201700217

Ling Y, Tan L, Wang X, Zhou Y, Xin Y, Ma B, Hanson K, Gao H (2017) Composite perovskites of cesium lead bromide for optimized photoluminescence. J Phys Chem Lett 8(14):3266–3271. https://doi.org/10.1021/acs.jpclett.7b01302CrossRef

Li M, Zhang X, Yang P (2021b) Controlling the growth of a SiO2 coating on hydrophobic CsPbBr 3 nanocrystals towards aqueous transfer and high luminescence. Nanoscale 13(6):3860–3867. https://doi.org/10.1039/d0nr08325aCrossRef

Li P, Liang C, Bao B, Li Y, Hu X, Wang Y, Zhang Y, Li F, Shao G, Song Y (2018) Inkjet manipulated homogeneous large size perovskite grains for efficient and large-area perovskite solar cells. Nano Energy 46:203–211. https://doi.org/10.1016/j.nanoen.2018.01.049CrossRef

Li R, Cai L, Zou Y, Xu H, Tan Y, Wang Y, Li J, Wang X, Li Y, Qin Y, Liang D, Song T, Sun B (2020b) High-efficiency perovskite light-emitting diodes with improved interfacial contact. ACS Appl Mater Interfaces 12(32):36681–36687. https://doi.org/10.1021/acsami.0c07514CrossRef

Li X, Wu Y, Zhang S, Cai B, Gu Y, Song J, Zeng H (2016) CsPbX₃ quantum dots for lighting and displays: room-temperature synthesis, photoluminescence superiorities, underlying origins and white light-emitting diodes. Adv Func Mater 26(15):2435–2445. https://doi.org/10.1002/adfm.201600109CrossRef

Li Y, Ma F, Zhao D, Lu F, Wang J, Cao S, Qian J, Zhou Y (2020a) Convenient synthesis of high-quality, all-inorganic lead halide perovskite nanocrystals for high purity monochrome QLED. Mater Technol 1–10. https://doi.org/10.1080/10667857.2020.1786782

Li Y, Qian J, Zhao D, Song R (2021a) Preparation of perovskite CsPb(BrxI1−x)3 quantum dots at room temperature. RSC Adv 11(30):18432–18439. https://doi.org/10.1039/d1ra02772gCrossRef

Li Z, Li P, Chen G, Cheng Y, Pi X, Yu X, Yang D, Han L, Zhang Y, Song Y (2020c) Ink engineering of inkjet printing perovskite. ACS Appl Mater Interfaces 12(35):39082–39091. https://doi.org/10.1021/acsami.0c09485CrossRef

Liu M, Zhao J, Luo Z, Sun Z, Pan N, Ding H, Wang X (2018) Unveiling solvent-related effect on phase transformations in CsBr–PbBr 2 system: coordination and ratio of precursors. Chem Mater 30(17):5846–5852. https://doi.org/10.1021/acs.chemmater.8b00537CrossRef

Pan A, Li Y, Wu Y, Yan K, Jurow MJ, Liu Y, He L (2019) Stable luminous nanocomposites of CsPbX3 perovskite nanocrystals anchored on silica for multicolor anti-counterfeit ink and white-LEDs. Mater Chem Front 3(3):414–419. https://doi.org/10.1039/c8qm00591eCrossRef

Pan A, Wang J, Jurow MJ, Jia M, Liu Y, Wu Y, Zhang Y, He L, Liu Y (2018) General strategy for the preparation of stable luminous nanocomposite inks using chemically addressable CsPbX3 peroskite nanocrystals. Chem Mater 30(8):2771–2780. https://doi.org/10.1021/acs.chemmater.8b00587CrossRef

Pan A, Yan L, Ma X, Wu Y, Zhang Y, Zhou G, He L (2020) Strongly luminescent and highly stable core-shell suprastructures from in-situ growth of CsPbBr3 perovskite nanocrystals in multidentate copolymer micelles. J Alloys Compd 844. https://doi.org/10.1016/j.jallcom.2020.156102

Protesescu L, Yakunin S, Bodnarchuk MI, Krieg F, Caputo R, Hendon CH, Yang RX, Walsh A, Kovalenko MV (2015) Nanocrystals of cesium lead halide perovskites (CsPbX₃, X = Cl, Br, and I): novel optoelectronic materials showing bright emission with wide color gamut. Nano Lett 15(6):3692–3696. https://doi.org/10.1021/nl5048779CrossRef

Qin Z, Dai S, Hadjiev VG, Wang C, Xie L, Ni Y, Wu C, Yang G, Chen S, Deng L, Yu Q, Feng G, Wang ZM, Bao J (2019) Revealing the origin of luminescence center in 0D Cs4PbBr 6 perovskite. Chem Mater 31(21):9098–9104. https://doi.org/10.1021/acs.chemmater.9b03426CrossRef

Sun C, Gao Z, Liu H, Wang L, Deng Y, Li P, Li H, Zhang Z-H, Fan C, Bi W (2019) One stone, two birds: high-efficiency blue-emitting perovskite nanocrystals for LED and security ink applications. Chem Mater 31(14):5116–5123. https://doi.org/10.1021/acs.chemmater.9b01010CrossRef

Su Y, Zeng Q, Chen X, Ye W, She L, Gao X, Ren Z, Li X (2019) Highly efficient CsPbBr 3 perovskite nanocrystals induced by structure transformation between CsPbBr3 and Cs4PbBr6 phases. J Mater Chem C 7(25):7548–7553. https://doi.org/10.1039/c9tc01763aCrossRef

Su S, Shen J, Sun H, Tao J, Xu D, Wei T, Fan C, Wang Z, Sun C, Bi W (2021) Shape-controlled synthesis of Ag/Cs4PbBr6 Janus nanoparticles. Nanotechnology 32 (7). https://doi.org/10.1088/1361-6528/abb905

Tan Y, Zou Y, Wu L, Huang Q, Yang D, Chen M, Ban M, Wu C, Wu T, Bai S, Song T, Zhang Q, Sun B (2018) Highly luminescent and stable perovskite nanocrystals with octylphosphonic acid as a ligand for efficient light-emitting diodes. ACS Appl Mater Interfaces 10(4):3784–3792. https://doi.org/10.1021/acsami.7b17166CrossRef

Wang H, Yin X, Wang L (2018) Highly stable perovskite nanogels as inks for multicolor luminescent authentication applications. J Mater Chem C 6(43):11569–11574. https://doi.org/10.1039/c8tc04420aCrossRef

Wu Z, Wang P, Wu J, Wei J, Sun Y, Wang N, Zhao Z (2020) Ultra-stable phosphor of h-BN white graphene-loaded all-inorganic perovskite nanocrystals for white LEDs. J Lumin 219. https://doi.org/10.1016/j.jlumin.2019.116941

Xu J, Huang W, Li P, Onken DR, Dun C, Guo Y, Ucer KB, Lu C, Wang H, Geyer SM, Williams RT, Carroll DL (2017) Imbedded nanocrystals of CsPbBr3 in Cs4 PbBr6 : kinetics, enhanced oscillator strength, and application in light-emitting diodes. Adv Mater 29 (43). https://doi.org/10.1002/adma.201703703

Yang X, Li M, Jiang J, Ma L, Tang W, Xu C, Cai HL, Zhang FM, Wu XS (2021) Fabrication of CsPbBr3 films with high quality using a simple method. J Phys D Appl Phys 54 (15). https://doi.org/10.1088/1361-6463/abd712

Yoon YJ, Lee KT, Lee TK, Kim SH, Shin YS, Walker B, Park SY, Heo J, Lee J, Kwak SK, Kim G-H, Kim JY (2018) Reversible, full-color luminescence by post-treatment of perovskite nanocrystals. Joule 2(10):2105–2116. https://doi.org/10.1016/j.joule.2018.07.012CrossRef

Zhang F, Shi Z, Li S, Ma Z, Li Y, Wang L, Wu D, Tian Y, Du G, Li X, Shan C (2019) Synergetic effect of the surfactant and silica coating on the enhanced emission and stability of perovskite quantum dots for anticounterfeiting. ACS Appl Mater Interfaces 11(31):28013–28022. https://doi.org/10.1021/acsami.9b07518CrossRef

Zeng P, Wei L, Zhao H, Zhang R, Chen H, Liu M (2020) Crystalline phase-controlled synthesis of regular and stable endotaxial cesium lead halide nanocrystals. J Mater Chem C 8(27):9358–9365. https://doi.org/10.1039/d0tc01604gCrossRef

Zeng Q, Du Y, Jiang J, Yu Q, Li Y (2021) Revealing the aging effect of metal-oleate precursors on the preparation of highly luminescent CsPbBr 3 nanoplatelets. J Phys Chem Lett 12(10):2668–2675. https://doi.org/10.1021/acs.jpclett.1c00300CrossRef

Zhihai W, Jiao W, Yanni S, Jun W, Yafei H, Pan W, Nengping W, Zhenfu Z (2019) Air-stable all-inorganic perovskite quantum dot inks for multicolor patterns and white LEDs. J Mater Sci 54(9):6917–6929. https://doi.org/10.1007/s10853-019-03382-2CrossRef

Title: Macro-prepared Cs4PbBr6/CsPbBr3 perovskite screen printing inks
Authors: Rong Song
Ying Li
Jun Qian
Publication date: 01-03-2022
Publisher: Springer Netherlands
Published in: Journal of Nanoparticle Research / Issue 3/2022
Print ISSN: 1388-0764
Electronic ISSN: 1572-896X
DOI: https://doi.org/10.1007/s11051-022-05448-w

Springer Professional

Abstract

Please log in to get access to your license.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Other articles of this Issue 3/2022

Cu NWs@Pd with controllable diameter: synthesis and their enhanced sensor performances in the detection of glucose and H2O2

Kinetics-controlled synthesis of gold–palladium alloy nano-corolla using a syringe pump and their applications for ethanol oxidation reaction

Tuning the photocatalytic activity of ZnO nanoparticles by the annihilation of intrinsic defects provoked by the thermal annealing

Aqueous foam loaded TiO2 nano-catalysts for promoting photodegradation of methylene blue

Improvement of hydrogen production performance by in situ doping of carbon nanotubes into TiO2 materials

A detailed theoretical study of the low-energy structures of Au–Ag bimetallic clusters

Premium Partners