Issue 10/2022
Content (21 Articles)
Solidification and Evolution of β-NiAl Phase in a Re-Containing Single Crystal Superalloy
Y. M. Li, X. G. Wang, Z. H. Tan, Y. H. Yang, J. L. Liu, J. D. Liu, J. G. Li, Y. Z. Zhou, X. F. Sun
Microstructure Distribution and Grain Coarsening Model of GCr15 Steel in the Laser Surface Treatment
Jin-shan Chen, Zhen-xing Li, Ya-jie Chu, Jie Chen, Xin-jun Shen
Processing and Specimen Thickness to Grain Size (t/d) Ratio Effects on Tensile Behaviour and Microformability of Copper Foils
Javed S. Ibrahim, Rohit T. Mathew, M. J. N. V. Prasad, K. Narasimhan
Incremental Tube Forming Process with a Novel Free Rotating Bearing Tool Tip: Experiment and FE Modeling with Anisotropic Plasticity Model
Hyung-Rim Lee, Myoung-Gyu Lee, Namsu Park
Heat-Affected Zone Characteristics with Post-Weld Heat Treatments in Austenitic Fe–Mn–Al–C Lightweight Steels
Seonghoon Jeong, Gitae Park, Bongyoon Kim, Joonoh Moon, Seong-Jun Park, Changhee Lee
Insight into the Dynamic Recrystallization Behavior and Microstructure Evolution of MP159 Superalloy During Hot Deformation
Yeqing Cai, Song Xiang, Yuanbiao Tan
Modelling Residual Stresses in Shot-Peened Magnesium Alloys: A Hybrid Method
Amir Yazdanmehr, Ali A. Roostaei, Hamid Jahed
Effect of Cr Incorporation on the Mechanical Properties of HfMoTiZrCr, HfMoNbZrCr, and HfMoNbTiCr Refractory High-Entropy Alloys
Lu Wang, Xia Li, Hongwei Niu, Lin Yang, Mingqin Xu, Jiaojiao Yi
Effect of Minor Sc Addition on the Microstructure Evolution of Al–Cu–Li–Mg Alloy During Homogenization with Different Cooling Modes
Ya Tang, Daihong Xiao, Lanping Huang, Renxuan You, Xinyue Zhao, Nan Lin, Yunzhu Ma, Wensheng Liu
Investigation of Corner Cracks in Continuous Casting Billet Using Thermomechanical Model and Plant Measurements
Aditya Narayan Shiv Shankar Swain, Suvankar Ganguly, Arunava Sengupta, Elanjickal Zachariah Chacko, Swapnil Dhakate, Pankaj Kumar Pandey
Pitting and Localized Galvanic Corrosion Characteristics of Gas Tungsten Arc Welded Austenitic Stainless Steel
Seunghyun Kim, Gidong Kim, Chang-Young Oh, Sangwoo Song
Effect of Heat Treatment on Microstructure and Mechanical Properties of Mg-10Li-3Al-3Zn-0.22Si Alloy
Yazhao Shen, Defu Li, Shengli Guo, Jiangtao Guo
Forming Limit and Mechanical Properties of 2024-O Aluminum Alloy Under Electromagnetic Forming
Yuhong Lin, Xiaohui Cui, Kanghua Chen, Ang Xiao, Ziqin Yan
Deformation Mechanism of 5052 Aluminum Alloy Using Electrically Assisted Electromagnetic Forming
Ang Xiao, Changqing Huang, HongSheng Liu, Xiaohui Cui, Shipeng Wang
Hot Deformation Behaviors and Process Parameters Optimization of Low-Density High-Strength Fe–Mn–Al–C Alloy Steel
Peng Wan, Huixiang Yu, Feng Li, Pengfei Gao, Lei Zhang, Zhengzhi Zhao
Effect of Strain Induced Melt Activation Process on the Microstructure and Mechanical Properties of Al-5Ti-1B Treated Al-7Si Alloy
Chandan Choudhary, H. N. Bar, A. K. Pramanick, K. L. Sahoo, Durbadal Mandal
Effects of Electromagnetic Fields on Interfacial Bonding Strength of Ti/Al Clad Sheet Processed by Horizontal Twin-Roll Casting
Jiujian Xu, Guangming Xu, Yong Li, Zhaodong Wang
Effect of Ni2Si Precipitates on Microstructure and Mechanical Properties of Cu–Zn Brasses
Wei Chen, Kai You, Jufang Yin, Ming Chen, Xiaolan Tao, Jiarui Hu, Xiaorong Chen, Qian Lei
Novel Metastable Nonequiatomic Ti-Zr-Nb-Mo Medium-Entropy Alloys with High Yield-Strength-to-Elastic-Modulus Ratios
Ka-Kin Wong, Hsueh-Chuan Hsu, Shih-Ching Wu, Wen-Fu Ho