Issue 6/2008
Content (20 Articles)
Effect of molybdenum and chromium on hardenability of low-carbon boron-added steels
Futao Han, Byoungchul Hwang, Dong-Woo Suh, Zuocheng Wang, Duk Lak Lee, Sung-Joon Kim
Mechanical analysis of woven composites at high strain rates and its application to predicting impact behavior
Hansun Ryou, Kwansoo Chung, Ji-Ho Lim
Effect of impact energy on the impact-wear properties of low carbon high manganese alloy steels in corrosive conditions
Kai Wang, Xiao-Dong Du, Kuk-Tae Youn, Yasunori Hayashi, Chan Gyu Lee, Bon Heun Koo
Evolution and mechanical effect of S′-phase in ECA pressed Al−3.8Cu−1.2Mg−0.5Mn alloys
Yong Lak Choi, Seon Hwa Kim
Transport properties of Bi43Se4Te53 thermoelectric alloy fabricated by mechanical grinding and pulse discharge sintering
Woo-Suk Choi, Bong-Gyu Park, Ik-Min Park, Yong-Ho Park
Indirect evaluation of the long-term oxidation properties of Al−21Ti−23Cr and Al−37Ti−12Cr coating materials for TiAl alloy
J. K. Lee, S. H. Kim, D. M. Wee, K. Sharvan Kumar, M. H. Oh
Steam oxidation and surface hardness of power plant valve materials under the ultra super critical steam condition
Ki O Song, Tong Yul Cho, Jae Hong Yoon, Chan Gyu Lee, Kee Sam Shin, Seon Ho Lee, Kee Won Urm, Jong Wook Lee, In Soo Kim
Influence of Co content on the biocompatibility and bio-corrosion of super ferritic stainless steels
Y. R. Yoo, S. G. Jang, H. S. Nam, G. T. Shim, H. H. Cho, J. G. Kim, Y. S. Kim
Thermal degradation behavior of inconel 617 alloy
Tae Sun Jo, Se-Hoon Kim, Dae-Gun Kim, Ji Yeon Park, Young Do Kim
Characteristics of ITO films deposited on a PET substrate under various deposition conditions
Jung Rak Lee, Dong Yeop Lee, Do Geun Kim, Gun Hwan Lee, Yang Do Kim, Pung Keun Song
Growth behaviors of GaN/Si heteroepitaxy with various terrace widths grown by the LEPS method
Eun-A Ko, Dong-Wook Kim, Heon-Song, Kannappan Santhakumar, Jin-Soo Kim, In-Hwan Lee, Byung-Joon Baek, Cheul-Ro Lee
Effects of defects generated in ALD TiO2 films on electrical properties and interfacial reaction in TiO2/SiO2/Si system upon annealing in vacuum
Sanghee Won, Seunghee Go, Wonhee Lee, Kyunghoon Jeong, Hyunsuk Jung, Chongmu Lee, Eungu Lee, Jaegab Lee
Prediction of electroplated copper protrusion profiles in trench patterns using an empirical equation
Sung Gyu Pyo, D. W. Lee, Sibum Kim
Predicting the dilution of plasma transferred arc hardfacing of stellite on carbon steel using response surface methodology
A. K. Lakshminarayanan, V. Balasubramanian, R. Varahamoorthy, S. Babu
Morphology and chemistry of oxide inclusions after Al and Ti complex deoxidation
Min-Ki Sun, In-Ho Jung, Hae-Geon Lee
Application of Paris’s law to thermal cycling-induced failure in semiconductor device patterns
Seong-Min Lee