Top

Published in:

2019 | OriginalPaper | Chapter

10. Multiresponse Optimization of Electrochemical Micro-machining Process Parameters of Micro-dimple Using TOPSIS Approach

Authors : B. Mouliprasanth, N. Lakshmanan, P. Hariharan

Published in: Advances in Micro and Nano Manufacturing and Surface Engineering

Publisher: Springer Singapore

Activate our intelligent search to find suitable subject content or patents.

search-config

AI-assisted search

Off

Abstract

Electrochemical micro-machining (ECMM) is generally used to effectively machine hard materials in mass production that are challenging to machine using the traditional approach. This process can pierce intricate contours, small or odd-shaped angles, or hollow craters in metals. The machining is restricted to electrically conductive materials. In this paper, techniques for producing micro-dimple are discussed. Producing a micro-hole is simple while a pit formation or micro-dimple formation needs a lot of study with respect to machining parameters. Optimization techniques are carried out so that form errors in creating micro-dimples are eradicated. Several researchers have studied the process and tried to improve various process parameters and factors affecting it. The paper focuses on producing a micro-dimple of 0.5 mm by varying the input parameters, namely voltage, feed rate, and duty ratio to get exceptional output response in MRR and S_a. The methods for handling ECMM and its parameters optimization using TOPSIS are shown in this paper.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

inform now

previous chapter Inkjet Printing-Based Micro-manufacturing of the Thin Film Electrodes for Flexible Supercapacitor Applications

next chapter Investigations into Micro-Hole Drilling on SS-304 by Sequential Electro-Micro Machining

Wang, M., Bao, Z., Qiu, G., Xu, X.: Fabrication of micro-dimple arrays by AS-EMM and EMM. Int. J. Adv. Manuf. Technol. 93, 787–797 (2017). https://doi.org/10.1007/s001170-017-0538-0

Mahata, S., Kunar, S., Bhattacharyya, B.: Micro dimple array fabrication by through mask electrochemical micromachining utilizing low-aspect-ratio mask. J. Electrochem. Soc. 165(3), E129–E137 (2018). https://doi.org/10.1149/2.0521803jesCrossRef

Hou, Z., Qu, N., Chen, X.: Electrochemical micromachining of large-area micro-dimple arrays with high machining accuracy. Proc. Inst. Mech. Eng. Part B: J. Eng. Manuf. https://doi.org/10.1177/0954405416682280CrossRef

Wang, G.Q., Zhu, D., Li, H.S.: Fabrication of semi-circular micro-groove on titanium alloy surface by through-mask electrochemical micromachining. J. Mater. Process. Tech. 258, 22–28 (2018). https://doi.org/10.1016/j.jmatprotec.2018.03.015CrossRef

Qu, N., Chen, X., Li, H., Zeng, Y.: Electrochemical micromachining of micro-dimple arrays on cylindrical inner surfaces using a dry-film photoresist. Chin. J. Aeronaut. 27(4), 1030–1036 (2014). https://doi.org/10.1016/j.cja.2014.03.012CrossRef

Skoczypiec, S.: Electrochemical methods of micro part’s manufacturing. In: Micro and Precision Manufacturing, Engineering Materials. https://doi.org/10.1007/978-3-319-68801-5_2

Patel, D.S., Jain, V.K., Shrivastava, A., Ramkumar, J.: Electrochemical micro texturing on flat and curved surfaces: simulation and experiments. Int. J. Adv. Manuf. Technol. https://doi.org/10.1007/s00170-016-9700-3CrossRef

Qu, N., Chen, X., Li, H., Zhu, D.: Fabrication of PDMS micro through-holes for electrochemical micromachining. Int. J. Adv. Manuf. Technol. 72, 487–494 (2014). https://doi.org/10.1007/s00170-014-5702-1CrossRef

Sadagopan, P., Mouliprasanth, B.: Investigation on the influence of different types of dielectrics in electrical discharge machining. Int. J. Adv. Manuf. Technol. 92, 277–291 (2017). https://doi.org/10.1007/s00170-017-0039-1CrossRef

10.

Yuvaraj, N., Pradeep Kumar, M.: Multiresponse optimization of abrasive water jet cutting process parameters using TOPSIS approach. Mater. Manuf. Process. https://doi.org/10.1080/10426914.20

Title: Multiresponse Optimization of Electrochemical Micro-machining Process Parameters of Micro-dimple Using TOPSIS Approach
Authors: B. Mouliprasanth
N. Lakshmanan
P. Hariharan
Publisher: Springer Singapore
Book: Advances in Micro and Nano Manufacturing and Surface Engineering
Print ISBN: 978-981-329-424-0

Electronic ISBN: 978-981-329-425-7

Copyright Year: 2019
DOI: https://doi.org/10.1007/978-981-32-9425-7_10

Springer Professional

Abstract

Please log in to get access to your license.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Premium Partners