Top

Journal of Nondestructive Evaluation

Published in:

01-09-2019

Non-destructive Neutron Surface Residual Stress Analysis

Authors: J. Rebelo Kornmeier, M. Hofmann, W. M. Gan, J. Gibmeier, J. Saroun

Published in: Journal of Nondestructive Evaluation | Issue 3/2019

Activate our intelligent search to find suitable subject content or patents.

search-config

AI-assisted search

Off

Abstract

Diffraction is a powerful tool for investigation of residual as well as applied stresses in engineering materials and components. Both X-ray and neutron diffraction can be used for this purpose. The interest in neutron stress analysis stems from the high penetrating power of neutrons when compared to laboratory X-ray sources, i.e. several cm instead of a few tens of µm in metallic materials. This contribution gives an overview on current instrumental and methodical developments for non-destructive through surface strain measurements, which bridges the gap between X-rays and neutrons analysis.

previous article A Cumulative Sums Algorithm for Segmentation of Digital X-ray Images

next article Medium Range Guided Wave Inspection of the Triple Point in Lined Pipes by EMATs

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

inform now

Hofmann, M., Schneider, R., Seidl, G.A., Rebelo Kornmeier, J., Wimpory, R., Garbe, U., Brokmeier, H.G.: The new materials science diffractometer STRESS-SPEC at FRM-II. Physica B 385–386, 1035–1037 (2006)CrossRef

Brokmeier, H.G., Gan, W.M., Randau, C., Völler, M., Rebelo Kornmeier, J., Hofmann, M.: Texture analysis at neutron diffractometer STRESS-SPEC. Nucl. Instrum. Methods Phys. Res. A 642, 87–92 (2011)CrossRef

Zinth, V., von Lüders, C., Hofmann, M., Hattendorff, J., Buchberger, I., Erhard, S., Rebelo Kornmeier, J., Jossen, A., Gilles, R.: Lithium plating in lithium-ion batteries at sub-ambient temperatures investigated by in situ neutron diffraction. J. Power Sources 271, 152–159 (2014)CrossRef

Cavaliere, P. (ed.): Chapter: 16. In: Cold-Spray Coatings. Recent Trends and Future Perspectives, 1st edn. Springer, Cham (2018)

Vladimir, L., Andrew, V., Valarezo, A., Sanjay, S.: Neutron through-thickness stress measurements in coatings with high spatial resolution. Mater. Sci. Forum 905, 165–173 (2017)CrossRef

Ramjaun, T.I., Stone, H.J., Karlsson, L., Gargouhri, M.A., Dalaei, K., Moat, R.J., Bhadeshia, H.K.D.H.: Surface residual stresses in multipass welds produced using low transformation temperature filler alloys. Sci. Technol. Weld. Join. 19(7), 623–630 (2014)CrossRef

Gibmeier, J., Back, H.C., Mutter, M., Vollert, F., Vaßen, R., Rebelo Kornmeier, J., Mücke, R., Vaßen, R.: Study of stability of microstructure and residual strain after thermal loading of plasma sprayed YSZ by through surface neutron scanning. Physica B 551, 69–78 (2018)CrossRef

Hutchings, M.T., Withers, P.J., Holden, T.M., Lorentzen, T.: Introduction to the Characterization of Residual Stress by Neutron Diffraction. Taylor and Francis, London (2005)CrossRef

Webster, P.J., Mills, G., Wang, X.D., Kang, W.P., Holden, T.M.: Impediments to efficient through-surface strain scanning. J. Neutron Res. 3, 223–240 (1995)CrossRef

10.

Rebelo Kornmeier, J., Gibmeier, J., Hofmann, M.: Minimization of spurious strains by using a Si bent-perfect-crystal monochromator: neutron surface strain scanning of a shot-peened sample. Meas. Sci. Technol. 22, 065705 (2011)CrossRef

11.

Šaroun, J., Rebelo Kornmeier, J., Hofmann, M., Mikula, P., Vrana, M.: Analytical model for neutron diffraction peak shifts due to the surface effect. J. Appl. Crystallogr. 46, 628–638 (2013)CrossRef

12.

Köhler, H., Rajput, R., Kahzan, P., Rebelo Kornmeier, J.: On the influence of laser cladding and post-processing strategies on residual stresses in steel specimens. Phys. Procedia 56, 250–261 (2014)CrossRef

13.

Coppola, R., Crescenzi, F., Gan, W., Hofmann, M., Lie, M., Visca, E., You, J.-H.: Neutron diffraction measurement of residual stresses in an ITER-like tungsten-monoblock type plasma-facing component. Fusion Eng. Des. (2019). https://doi.org/10.1016/j.fusengdes.2019.01.059 CrossRef

14.

Šaroun, J., Rebelo Kornmeier, J., Gibmeier, J., Hofmann, M.: Treatment of spatial resolution effects in neutron residual strain scanning. Physica B (2018). https://doi.org/10.1016/j.physb.2018.01.013 CrossRef

15.

Pirling, T.: Neutron strain scanning at interfaces: an optimised beam optics to reduce the surface effect. Mater. Sci. Forum 347–349, 107–112 (2000)CrossRef

16.

Šaroun, J., Kulda, J.: Raytrace of neutron optical systems with RESTRAX. In: Modern Developments in X-Ray and Neutron Optics. Springer Series in Optical Sciences, vol. 137, pp. 57–68. Springer, Berlin (2008)

17.

Defendi, I., Egerland, S., Kastenmüller, A., Mühlbauer, M., Panradl, M., Schöffel, T., Zeitelhack, K.: FRM II Annual Report (2005)

18.

Eigenmann, B., Macherauch, E.: Rontgenographische Untersuchung von Spannungszustanden in Werkstoffen. Mater.-wiss. Werkst. 27, 426–437 (1996)CrossRef

Title: Non-destructive Neutron Surface Residual Stress Analysis
Authors: J. Rebelo Kornmeier
M. Hofmann
W. M. Gan
J. Gibmeier
J. Saroun
Publication date: 01-09-2019
Publisher: Springer US
Published in: Journal of Nondestructive Evaluation / Issue 3/2019
Print ISSN: 0195-9298
Electronic ISSN: 1573-4862
DOI: https://doi.org/10.1007/s10921-019-0617-2

Springer Professional

Abstract

Please log in to get access to your license.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Other articles of this Issue 3/2019

Uncertainty Estimation for Ultrasonic Inspection of Composite Aerial Structures

Nondestructive Spot Weld Quality Evaluation by Measurement of Structural Vibration Transfer Through Joined Panels

Contextual Application of Pulse-Compression and Multi-frequency Distance-Gain Size Analysis in Ultrasonic Inspection of Forging

Phased Array Ultrasonic Inspection of Metal Additive Manufacturing Parts

A Damage Modes Extraction Method from AE Signal in Composite Laminates Based on DEEMD

Nonlinear Acoustic Spectroscopy and Frequency Sweep Ultrasonics: Case on Thermal Damage Assessment in Mortar

Premium Partners