Skip to main content
Disciplines
Automotive Business IT + Informatics Construction + Real Estate Electrical Engineering + Electronics Energy + Sustainability Insurance + Risk Finance + Banking Management + Leadership Marketing + Sales Mechanical Engineering + Materials
Events
DE
EN
Books
Journals
Topic Page
Marketing
Start single access now
Access for companies
EXTENDED SEARCH
Log in
Top
Published in:
Aqueous Colloidal Injection Molding of Ceramics (CIMC) Based on Gelation Read chapter Read first chapter

2020 | OriginalPaper | Chapter

8. Novel In-situ Coagulation Casting of Ceramic Suspensions

Authors : Prof. Jinlong Yang, Prof. Yong Huang

Published in: Novel Colloidal Forming of Ceramics

Publisher: Springer Singapore

Log in

Activate our intelligent search to find suitable subject content or patents.

search-config
loading …

Abstract

In this chapter, direct coagulation casting of ceramics via controlled release of high valence counter-ions and novel in-situ coagulation casting of ceramic suspensions via dispersion removal are discussed systematically. Direct coagulation casting of ceramics via high valance counter-ions (DCC–HVCI), as a new direct coagulation casting method, is proposed based on the strong coagulation ability of high valance counter-ions (HVCI) on ceramic suspension. The influence of types and addition content of dispersant, pH value, and solid loading on zeta potential and viscosity of ceramic suspensions has been systematically investigated. Several new methods for controlled release of HVCI have been proposed, such as using temperature as the leading controlling factor, chemical reaction and pH value as assisting controlling means, the increase of solubility of calcium iodate, calcium phosphate reacting with hydrochloric acid and decomposition of citric acid salt, and so on. It has been proved from both experimental and theoretical calculation results that the suspension of DCC–HVCI is coagulated at the primary minimum. This avoids the problems such as cracks formation and inner stress resulted from monovalence ions coagulation method which has been proved to coagulate at the second minimum. The results of this chapter are the basis for the deep research and applications of DCC. Based on the stabilization mechanism of ceramic suspension, we systemically investigate another new ceramic colloidal forming method, namely, dispersion removal coagulation casting (DRCC). Dispersant reaction, hydrolysis, crosslink, and separation have been used to control the dispersion removed processing. In the second part, the coagulation mechanisms of different ceramic suspension systems with different stabilization mechanisms are systematically investigated and the idea of the dispersion removal has been proposed. Different kinds of oxide and non-oxide ceramics and green bodies with excellent performance have been successfully prepared by dispersion removal method. The results are the basis for the further research and applications of ceramic colloidal forming. It provides a new idea and new method for the further study of the colloidal processing of advanced ceramics and also provides a new way for the industrialization of advanced ceramics with complex shapes.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

  • über 102.000 Bücher
  • über 537 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Finance + Banking
  • Management + Führung
  • Marketing + Vertrieb
  • Maschinenbau + Werkstoffe
  • Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

  • über 67.000 Bücher
  • über 390 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Maschinenbau + Werkstoffe




 

Jetzt Wissensvorsprung sichern!

inform now
previous chapter New Methods and Techniques Based on Gelation
Literature
Adar, J. H., Mutsuddy, B. C., & Drauglis, E. J. (1988). Stabilization of silicon carbide whisker suspension: i influence of surface oxidation in aqueous suspension. Advanced Ceramic Materials, 3, 231–234.CrossRef
Adolfsson, E. (2008). Gelcasting of zirconia using agarose. Journal of the American Ceramic Society, 89, 1897–1902.CrossRef
Agarwala, M. K., Bandyopadhyay, A., Weeren, R., et al. (1996). Rapid fabrication of structural components. American Ceramic Society Bulletin, 75, 60–66.
Alford, N. M., Birchall, J. D., & Kendall, K. (1987). High strength ceramics through colloidal control to remove defects. Nature, 330, 51–53.CrossRef
Baader, F. H., Graule, T. J., & Gauckler, L. J. (1996a). Direct coagulation casting–a new green shaping technique. Part I. Processing Principles. Indian Ceramic, 16(1), 31–35.
Baader, F. H., Graule, T. J., & Gauckler, L. J. (1996b). Direct coagulation casting–a new green shaping technique. Part II. Application to Alumina. Indian Ceramic, 16(1), 36–40.
Baes, C. F., & Mesmer, R. E. (1986). The hydrolysis of cations. Malabar: Krieger Publishing Co.
Bakarič, T., Budič, B., Malič, B., et al. (2015). The influence of pH dependent ion leaching on the processing of lead–zirconate–titanate ceramics. Journal of the European Ceramic Society, 35, 2295–2302.CrossRef
Balzer, B., Hruschka, M. K. M., & Gauckler, L. J. (1999). Coagulation kinetics and mechanical behavior of wet alumina green bodies produced via DCC. Journal of Colloid and Interface Science, 216(2), 379–386.CrossRef
Balzer, B., Hruschka, M. K. M., & Gauckler, L. J. (2001). In situ rheological investigation of the coagulation in aqueous alumina suspensions. Journal of the American Ceramic Society, 84(8), 1733–1739.CrossRef
Barabási, A.-L., Albert, R., & Schiffer, P. (1999). The physics of sand castles: maximum angle of stability in wet and dry granular Media. Physics A, 266(1–4), 366–371.CrossRef
Bergström, L. (1998). Shear thinning and shear thickening of concentrated ceramic suspensions. Colloid Surface A, 133, 151–155.CrossRef
Binner, J. G., McDermott, A. M., Yin, Y., et al. (2006). In situ coagulation moulding: A new route for high quality, net–shape ceramics. Ceramics International, 32(1), 29–35.CrossRef
Briscoe, B. J., Khan, A. U., & Luckham, P. F. (1998). Stabilising zirconia aqueous suspensions using commercial polyvalent electrolyte solutions. Journal of the European Ceramic Society, 18(14), 2169–2173.CrossRef
Cai, K., Huang, Y., & Yang, J. (2005). Alumina gelcasting by using HEMA system. Journal of the European Ceramic Society, 25(7), 1089–1093.CrossRef
Chelvi T. P. Ralhan R., 1995. Designing of thermosensitive liposomes from natural lipids for multimodality cancer therapy. International Journal of Hyperthermia, 11(5), 685–695.CrossRef
Cho, J. M., & Dogan, F. (2001). Colloidal processing of lead lanthanum zirconate titanate ceramics. Journal of Materials Science, 36, 2397–2403.CrossRef
Chu, S. Y., Chen, T. Y., Tsai, I. T., et al. (2004). Doping effects of Nb additives on the piezoelectric and dielectric properties of PZT ceramics and its application on SAW device. Sensor and Actuators A: Physical, 113, 198–203.CrossRef
Davies, J., & Binner, J. G. P. (2000). Plastic forming of alumina from coagulated suspensions. Journal of the European Ceramic Society, 20, 1569–1577.CrossRef
Delplancke, M. P., Powers, J. M., Vandentop, G. J., et al. (1991). Preparation and characterization of amorphous SiC: H thin films. Journal of Vacuum Science and Technology, 9, 450–455.CrossRef
Evans, A. G., & Cannon, R. M. (1986). Overview no. 48: toughening of brittle solids by martensitic transformations. Acta Metallurgica, 34, 761–800.CrossRef
Ewais, E., & Safari, A. (2010). Gelation of water–based PZT slurries in the presence of ammonium polyacrylate using agarose. Journal of the European Ceramic Society, 30, 3425–3434.CrossRef
Ewais, E., Zaman, A. A., & Sigmund, W. (2002). Temperature induced forming of zirconia from aqueous slurries: mechanism and rheology. Journal of the European Ceramic Society, 22(16), 2805–2812.CrossRef
Fanelli, A. J., Silvers, R. D., Frei, W. S., et al. (1989). New aqueous injection molding process for ceramic powders. Journal of the American Ceramic Society, 72(10), 1833–1836.CrossRef
Flory, P. J. (1953). Principles of polymer chemistry. London: Cornell University Press.
Frankel, D. A., Lamparski, H., Liman, U., et al. (1989). Photoinduced destabilization of bilayer vesicles. Journal of the American Ceramic Society, 111(26), 9262–9263.
Franks, G. V., & Meagher, L. (2003). The isoelectric points of sapphire crystals and alpha–alumina powder. Colloids and Surfaces A: Physicochemical and Engineering Aspects, 214(1–3), 99–110.CrossRef
Franks, G. V., Johnson, S. B., Scales, P. J., et al. (1999). Ion–specific strength of attractive particle networks. Langmuir, 15(13), 4411–4420.CrossRef
Franks, G. V., & Lange, F. F. (1996). Plastic–to–brittle transition of saturated, alumina powder compacts. Journal of the American Ceramic Society, 79(12), 3161–3168.CrossRef
Fukada, Y., & Nicholson, P. S. (2004). The role of Si–O species in the colloidal stability of silicon–containing ceramic powders. Journal of the European Ceramic Society, 24, 17–23.CrossRef
Gaber, M. H., Hong, K., Huang, S. K., et al. (1995). Thermo–sensitive sterically stabilized liposomes: formulation microscopy, and invitro studies on mechanism of doxorubicin release by bovine serum and human plasma. Pharmacological Research, 12(10), 14016.
Gan, K., Xu, J., Lu, Y. J., et al. (2017). Preparation of silicon carbide ceramics using chemical treated powder by DCC via dispersant reaction and liquid phase sintering. Journal of the European Ceramic Society, 37(3), 891–897.CrossRef
Gan, K., Xu, J., Zhang, X. Y., et al. (2016). Direct coagulation casting of silicon nitride suspension via a dispersant reaction method. Ceramics International, 42(3), 4347–4353.CrossRef
Garvie, R. C., Hannink, R. H., & Pascoe, R. T. (1975). Ceramic steel? Nature, 258, 703–704.CrossRef
Gaucker, L. J., Graule, T. J., & Baader, F. H. (1999b). Enzyme catalysis of alumina forming. Key Engineering Materials, 159–160, 135–150.
Gauckler, L. J., Graule, T. J., & Baader, F. H. (1999a). Ceramic forming using enzyme catalyzed reactions. Materials Chemistry and Physics, 61(1), 78–102.
Graule, T. J., Baader, F. H., & Gaucker, L. J. (1995). Casting uniform ceramics with direct coagulation. ChemTech, 25(6), 31–37.
Greenwood, R., & Kendall, K. (1999). Selection of suitable dispersants for aqueous suspensions of zirconia and titania powders using acoustophoresis. Journal of the European Ceramic Society, 19, 479–488.CrossRef
Gubernat, A., Zych, L., & Wierzba, W. (2015). SiC products formed by slip casting method. The International Journal of Applied Ceramic Technology, 12(5), 957–966.CrossRef
Guo, D., Cai, K., Huang, Y., et al. (2003c). Water based gelcasting of lead zirconate titanate. Materials Research Bulletin, 38, 807–816.CrossRef
Guo, D., Cai, K., Li, L. T., et al. (2003a). Application of gelcasting to the fabrication of piezoelectric ceramic parts. Journal of the European Ceramic Society, 23, 1131–1137.CrossRef
Guo, D., Cai, K., Li, L. T., et al. (2003b). Gelcasting of PZT. Ceramics International, 29, 403–406.CrossRef
Guo, D., Li, L. T., Cai, K., et al. (2004). Rapid prototyping of piezoelectric ceramics via selective laser sintering and gelcasting. Journal of the American Ceramic Society, 87, 17–22.CrossRef
Guo, D., Li, L. T., Gui, Z. L., et al. (2003d). Anti–crack machining of PZT ceramics for fabricating piezocomposites by using gelcasting technique. Materials Science and Engineering B, 99, 25–28.CrossRef
Haas, P. A. (1989). Gel processes for preparing ceramics and glasses. Chemical Engineering Progress, 854, 44–52.
Halter, W. E. (1999). Surface acidity constants of ɑ–Al2O3 between 25 and 70 °C. Geochimica et Cosmochimica Acta, 63(19–20), 3077–3085.CrossRef
Halter, W. E. (2003). Surface acidity constants of ɑ–Al2O3 Between 25 and organic dispersants in aqueous alumina suspensions. Journal of the European Ceramic Society, 23(6), 913–919.CrossRef
Hannink, R. H. J., Kelly, P. M., & Muddle, B. C. (2000). Transformation toughening in zirconia–containing ceramics. Journal of the American Ceramic Society, 83, 461–487.CrossRef
Harris, A. J., Vaughan, B., Yeomans, J. A., et al. (2013). Surface preparation of silicon carbide for improved adhesive bond strength in armour applications. Journal of the European Ceramic Society, 33, 2925–2934.CrossRef
He, X., Su, B., Zhou, X., et al. (2011). Gelcasting of alumina ceramic using an egg white protein binder system. Ceramics–Silikaty, 55(1), 1–7.
Hesselbarth, D., Tervoort, E., Urban, C., et al. (2001). Mechanical properties of coagulated wet particle networks with alkali swellable thickners. Journal of the American Ceramic Society, 84(8), 1689–1695.CrossRef
Hidber, P. C., Graule, T. J., & Gauckler, L. J. (1996). Citric acid–A dispersant for aqueous alumina suspensions. Journal of the American Ceramic Society, 79(7), 1857–1867.CrossRef
Horn, R. G. (2010). Surface forces and their action in ceramic materials. Journal of the American Ceramic Society, 73(5), 1117–1135.CrossRef
Hornbaker, D. J., Albert, R., Albert, I., et al. (1997). What keeps sandcastles standing? Nature, 387, 765.CrossRef
Hotza, D., & Greil, P. (1995). Aqueous tape casting of ceramic powders. Materials Science and Engineering A, 202(1–2), 206–217.CrossRef
Hsu, J. P., & Kuo, Y. C. (1997). The critical coagulation concentration of counterions: spherical particles in asymmetric electrolyte solutions. Journal of Colloid and Interface Science, 185(2), 530–537.CrossRef
Huisman, W., Graule, T., & Gauckler, L. J. (1995). Conditions to obtain reliable high strength alumina via centrifugal casting, ceramic processing, science and technology. Ceramic Transactions, 51, 451–455.
Hunter, R. J. (1987). Foundations of colloid science. Oxford: Clarendon Press.
Isrealachvili, J. N. (1991). Intermolecular and surface forces (2nd ed.). London: Academic Press.
Jaeger, H. M., & Nagel, S. R. (1992). Physics of the granular state. Science, 255, 1523–1531.CrossRef
Jia, Y., Kanno, Y., & Xie, Z. P. (2002). New gel–casting process for alumina ceramics based on gelation of alginate. Journal of the European Ceramic Society, 22(12), 1911–1916.CrossRef
Jiang, D. L., & Zhang, J. X. (2011). Properties of carbide ceramics from gelcasting and pressure–Less sintering. In Advance engineerig ceramics and composites: IOP conference series materials science and engineering (Vol. 18, p. 202001).
Johnson, S. B., Franks, G. V., Scales, P. J., et al. (2000). Surface chemistry–Rheology relationships in concentrated mineral suspensions. The International Journal of Mineral Processing, 58, 267–304.CrossRef
Kaplan, R., & Parrill, T. M. (1986). Reduction of SiC surface oxides by a Ga molecular beam: LEED and electron spectroscopy studies. Surface Science, 165, 45–52.CrossRef
Karaman, M. E., Pashley, R. M., Waite, T. D., et al. (1997). A comparison of the interaction forces between model alumina surfaces and their colloidal properties. Colloids and Surfaces A: Physicochemical and Engineering Aspects, 129–130, 239–255.CrossRef
Klahn, M., Mathias, G., Kotting, C., et al. (2004). IR spectra of phosphate ions in aqueous solution: predictions of a DFT/MM approach compared with observations. Journal of Physical Chemistry A, 108(108), 6186–6194.CrossRef
Kono, K., Hayashi, H., & Takagishi, T. (1994). Temperature–sensitive liposomes: Liposomes bearing poly(N–isopropylacrylamide). Journal of Controlled Release, 30(1), 69–75.CrossRef
Kosmac, T., Novak, N., & Sajko, M. (1997). Hydrolysis–assisted solidification (HAS): A new setting concept for ceramic net–shaping. Journal of the European Ceramic Society, 17(2–3), 427–432.CrossRef
Krall, A. H., & Weitz, D. A. (1998). Internal dynamics and elasticity of fractal colloidal gels. Physical Review Letters, 80(4), 778–781.CrossRef
Krieger, I. M. (1972). Rheology of monodisperse lattices. Advances in Colloid and Interface Science, 3(2), 111–136.CrossRef
Laberty-Robert, C., Ansart, F., Deloget, C., et al. (2003). Dense yttria stabilized zirconia: Sintering and microstructure. Ceramics International, 29(2), 151–158.CrossRef
Lange, F. F. (1982). Transformation toughening. Journal of Materials Science, 17, 225–234.CrossRef
Lewis, J. A. (2000). Colloidal processing of ceramics. Journal of the American Ceramic Society, 83(10), 2341–2359.CrossRef
Li, M. (2003). Concise handbook of chemical data. Beijing: Chemical Industry Press.
Lindner, L. H., Eichhorn, M. E., Eibl, H., et al. (2004). Novel temperature–sensitive liposomes with prolonged circulation time. Clinical Cancer Research, 10, 2168–2178.CrossRef
Liu, D. M. (1999). Effect of dispersants on the rheological behavior of zirconia–wax suspensions. Journal of the American Ceramic Society, 82, 1162–1168.CrossRef
Liu, X. J., Huang, L. P., Gu, H. C., et al. (2001). Direct coagulation casting of silicon nitride ceramics. Journal of Inorganic Materials, 16, 877–882.
Luther, E. E., Yanez, J. A., Franks, G. V., et al. (1995). Effect of ammonium citrate on the rheology and particle packing of alumina slurries. Journal of the American Ceramic Society, 78(6), 500–1495.CrossRef
Mekhemer, G. A. H. (1998). Characterization of phosphate zirconia by XRD, Raman and IR spectroscopy. Colloids and Surfaces A, 141(2), 227–235.CrossRef
Metcalfe, I. M., & Healy, T. W. (1990). Charge–regulation modelling of the schulze–hardy rule and related coagulation effects, Faraday Discuss. Chemical Society, 90, 335–344.
Millan, A. J., Nieto, M. I., & Moreno, R. (2000). Aqueous injection moulding of silicon nitride. Journal of the European Ceramic Society, 20(14), 2661–2666.CrossRef
Moloney, V. M. B., Parris, D., & Edirisinghe, M. J. (1995). Rheology of zirconia suspensions in a nonpolar organic medium. Journal of the American Ceramic Society, 78(12), 3225–3232.CrossRef
Moreno, R., & Cordoba, G. (1997). Oil–related deflocculants for tape casting slips. Journal of the European Ceramic Society, 17(2–3), 351–357.CrossRef
Moreno, R., Salomoni, A., & Castanho, S. M. (1998). Colloidal filtration of silicon nitride aqueous slips. Part I: Optimization of the slip parameters. Journal of the European Ceramic Society, 18, 405–416.CrossRef
Mustafa, S., Dilara, B., Neelofer, Z., et al. (1998). Temperature effect on the surface charge properties of γ–Al2O3. Journal of Colloid and Interface Science, 204(2), 93–284.CrossRef
Navarro, A., Alcock, J. R., & Whatmore, R. W. (2004a). Aqueous colloidal processing and green sheet properties of lead zirconate titanate (PZT) ceramics made by tape casting. Journal of the European Ceramic Society, 24, 1073–1076.CrossRef
Navarro, A., Whatmore, R. W., & Alcock, J. R. (2004b). Preparation of functionally graded PZT ceramics using tape casting. The Journal of Electroceramics, 13, 413–415.CrossRef
Needham, D., & Dewhirst, M. W. (2001). The development and testing of a new temperature–sensitive drug delivery system for the treatment of solid tumors. Advanced Drug Delivery Reviews, 53(3), 285–305.CrossRef
Noshchenko, O., Kuscer, D., Mocioiu, O. C., et al. (2014). Effect of milling time and pH on the dispersibility of lead zirconate titanate in aqueous media for inkjet printing. Journal of the European Ceramic Society, 34, 297–305.CrossRef
Olhero, S. M., Garcia-Gancedo, L., Button, T. W., et al. (2012). Innovative fabrication of PZT pillar arrays by a colloidal approach. Journal of the European Ceramic Society, 32, 1067–1075.CrossRef
Ozkurt, Z., & Kazazoğlu, E. (2010). Clinical success of zirconia in dental applications. Journal of Prosthodontic, 19(1), 64–68.CrossRef
Parrill, T. M., & Chung, Y. W. (1991). Surface analysis of cubic silicon carbide (001). Surface Science, 243, 96–112.CrossRef
Prabhakaran, K., Joseph, K., Sooraj, R., et al. (2010). Magnesia induced coagulation of aqueous PZT powder suspensions for direct coagulation casting. Ceramics International, 36, 2095–2101.CrossRef
Prabhakaran, K., Kumbhar, C. S., & Raghunath, S. (2008a). Effect of concentration of ammonium poly(acrylate) dispersant and MgO on coagulation characteristics of aqueous alumina direct coagulation casting slurries. Journal of the American Ceramic Society, 91(6), 1933–1938.CrossRef
Prabhakaran, K., Melkeri, A., Gokhale, N. M., et al. (2009). Direct coagulation casting of YSZ powder suspensions using MgO as coagulating agent. Ceramics International, 35, 1487–1492.CrossRef
Prabhakaran, K., Raghunath, S., & Melkeri, A. (2008b). Mechanical properties of wet–coagulated alumina bodies prepared by direct coagulation casting using a MgO coagulating agent. Journal of the American Ceramic Society, 91(11), 3608–3612.CrossRef
Prabhakaran, K., Raghunath, S., & Melkeri, A. (2008c). Novel coagulation method for direct coagulation casting of aqueous alumina slurries prepared using a poly(acrylate) dispersant. Journal of the American Ceramic Society, 91(2), 615–619.CrossRef
Rak, Z., & Van, Tilborg P. (1991). Aqueous injection moulding process. Euro-Ceramics II, 1, 409–441.
Rao, S. P., Tripathy, S. S., & Raichur, A. M. (2007). Dispersion studies of sub–micron zirconia using Dolapix CE 64. Colloids and Surfaces A, 302(1), 553–558.CrossRef
Roy, S., Rao, B. C., & Subrahmanyam, J. (2007a). Water–based gelcasting of lead zirconate titanate and evaluation of mechanical properties of the gelcast samples. Scripta Materialia, 57, 817–820.CrossRef
Roy, S., Rao, B. C., & Subrahmanyam, J. (2007b). Evaluation of mechanical properties of gelcast lead zirconate titanate disks sintered at different temperatures. Scripta Materialia, 57, 1024–1027.CrossRef
Ruckenstein, E. (1993). On the stability of concentrates non–aqueous dispersions. Colloids and Surfaces, 69(4), 271–275.CrossRef
Sabin, J., Prieto, G., Messina, P. V., et al. (2005). On the Effect of Ca2+ and La3+ on the Colloidal Stability of Liposomes. Langmuir, 21(24), 10968–10975.CrossRef
Sano, S., Oda, K., Ohshima, K., et al. (1995). Slip casting of silicon nitride and mechanical properties of sintered body V vacuum–pressure–assisted slip casting of silicon nitride powder produced by imide decomposition. Journal of the Ceramic Society of Japan, 103, 939–943.CrossRef
Schenker, I., Filser, F. T., Aste, T., et al. (2008). Microstructures and mechanical properties of dense particle gels: Microstructural characterization. Journal of the European Ceramic Society, 28(7), 1443–1449.CrossRef
Sciti, D., & Bellosi, A. (2000). Effects of additives on densification, microstructure and properties of liquid–phase sintered silicon carbide. Journal of Materials Science, 35(15), 3849–3855.CrossRef
Sharma, D., Chelvi, T. P., Kaur, J., et al. (1998). Thermosensitive lipo–somal taxol formulation: heat–mediated targeted drug delivery in murine melanoma. Melanoma Research, 8(3), 240–244.CrossRef
Shen, Z. G., Chen, J. F., Zou, H. K., et al. (2004). Dispersion of nanosized aqueous suspensions of barium titanate with ammonium polyacrylate. Journal of Colloid and Interface Science, 275, 158–164.CrossRef
Si, W. J., Graule, T. J., Baader, F. H., et al. (2010). Direct coagulation casting of silicon carbide components. Journal of the American Ceramic Society, 82(5), 1129–1136.CrossRef
Silva, V., & Lameiras, F. S. (2000). Synthesis and characterization of composite powders of partially stabilized zirconia and hydroxyapatite. Materials Characterization, 45(1), 51–59.CrossRef
Smay, J. E., & Lewis, J. A. (2001). Structural and property evolution of aqueous– based lead zirconate titanate tape–cast layers. Journal of the American Ceramic Society, 84, 2495–2500.CrossRef
Sprycha, R. (1989). Electrical double layer at alumina/electrolyte interface i. Surface charge and zeta potential. Journal of Colloid and Interface Science, 127(1), 1–11.CrossRef
Sun, J., & Gao, L. (2003). Influence of forming methods on the microstructure of 3Y–TZP specimens. Ceramics International, 29, 971–974.CrossRef
Sun, J., Gao, L., & Guo, J. K. (2000). Surface properties of silicon carbide powders and rheological properties of their slurries. Journal of Inorganic Materials, 15, 426–430.
Suntako, R., Laoratanakul, P., & Traiphol, N. (2009). Effects of dispersant concentration and pH on properties of lead zirconate titanate aqueous suspension. Ceramics International, 35, 1227–1233.CrossRef
Surowiak, Z., Kupriyanov, M. F., & Czekaj, D. (2001). Properties of nanocrystalline ferroelectric PZT ceramics. Journal of the European Ceramic Society, 21, 1377–1381.CrossRef
Tadros, T. F. (1996). Correlation of viscoelastic properties of stable and flocculated suspension with their interparticle interactions. Advances in Colloid and Interface Science, 68, 97–200.CrossRef
Tarì, G., Olhero, S. M., & Ferreira, J. M. F. (2000). Influence of temperature on stability of electrostatically stabilized alumina suspensions. Journal of Colloid and Interface Science, 231(2), 221–227.CrossRef
Teot, S., & Daniels, S. L. (1969). Flocculation of negatively charged colloids by inorganic cations and anionic polyelectrolytes. Science and Technology, 3(9), 825–829.CrossRef
Tiller, F. M., & Tsai, C.-D. (1986). Theory of filtration of ceramics: I, Slip casting. Journal of the American Ceramic Society, 69(12), 882–887.CrossRef
Tonsuaadu, K., Zalga, A., Beganskiene, A., et al. (2012). Thermoanalytical study of the YSZ precursors prepared by aqueous sol–gel synthesis route. The Journal of Thermal Analysis and Calorimetry, 110(1), 77–83.CrossRef
Torre, J. P., & Bigay, Y. (1986). Fabrication of silicon nitride parts by slip casting. The Ceramic Engineering and Science, 7, 893–899.CrossRef
Traiphol, N., Suntako, R., & Chanthornthip, K. (2010). Roles of polymeric dispersant charge density on lead zirconate titanate aqueous processing. Ceramics International, 36, 2147–2153.CrossRef
Valdivieso, A. L., Bahena, J. L. R., Song, S., et al. (2006). Temperature effect on the zeta potential and fluoride adsorption at the ɑ–Al2O3 aqueous solution interface. Journal of Colloid and Interface Science, 298(1), 1–5.CrossRef
Wang, F., Xie, Z. P., Jia, C., et al. (2011). Study on the process of Si3N4 ceramic with high properties by gel–casting. Journal of Synthetic Crystals, 40, 743–747.
Wang, J., & Gao, L. (1999). Deflocculation control of polyelectrolyte–adsorbed ZrO2 suspensions. Journal of Materials Science Letters, 18(23), 1891–1893.CrossRef
Wang, J., Gao, L., Sun, J., et al. (1999). Surface characterization of NH4PAA–stabilized zirconia suspensions. Journal of Colloid and Interface Science, 213, 552–556.CrossRef
Wang, K., & Wu, B. (1960). Instability constant of complex (pp. 22–168). Beijing: Science Press.
Wang, X. X., Murakami, K., Sugiyama, O., et al. (2001). Piezoelectric properties, densification behavior and microstructural evolution of low temperature sintered PZT ceramics with sintering aids. Journal of the European Ceramic Society, 21, 1367–1370.CrossRef
van Wazer, J. R., & Callis, C. F. (1958). Metal complexing by phosphates. Chemical Reviews, 58(6), 1011–1046.CrossRef
Wen, N., Cai, K., Xu, J., et al. (2011). Influence of high valence counter–ions on the rheology of alumina suspension. Journal of the Chinese Ceramic Society, 39(11), 1768–1772.
Wyss, H. M., Hütter, M., Müller, M., et al. (2002). Quantification of microstructures in stable and gelated suspensions from cryo–SEM. Journal of Colloid and Interface Science, 248(2), 340–346.CrossRef
Wyss, H. M., Tervoort, E. V., & Gauckler, L. J. (2005). Mechanics and microstructure of concentrated particle gels. Journal of the American Ceramic Society, 88(9), 48–2337.CrossRef
Wyss, H. M., Tervoort, E., Meier, L. P., et al. (2004). Relation between microstructure and mechanical behavior of concentrated silica gels. Journal of Colloid and Interface Science, 273(2), 455–462.CrossRef
Xie, R., Liu, C., Zhao, Y., et al. (2015). Gelation behavior and mechanical properties of gelcast lead zirconate titanate ceramics. Journal of the European Ceramic Society, 35, 2051–2056.CrossRef
Xie, R., Zhao, Y., Zhou, K., et al. (2014). Fabrication of fine–scale 1–3 piezoelectric arrays by aqueous gelcasting. Journal of the American Ceramic Society, 97, 2590–2595.CrossRef
Xie, Z. P., Ma, J. T., Xu, Q., et al. (2004). Effects of dispersants and soluble counter–ions on aqueous dispersibility of nano–sized zirconia powder. Ceramics International, 30, 219–224.CrossRef
Xu, J., Gan, K., Yang, M., et al. (2015a). Direct coagulation casting of yttria–stabilized zirconia using magnesium citrate and glycerol diacetate. Ceramics International, 41(4), 5772–5778.CrossRef
Xu, J., Qu, Y., Qi, F., et al. (2014b). Direct coagulation casting of alumina using magnesium citrate as coagulating agent with glycerol diacetate as pH regulator. Journal of Materials Science, 49, 5564–5570.CrossRef
Xu, J., Qu, Y., Xi, X., et al. (2012c). Properties of alumina coagulated bodies prepared by direct coagulation casting via high valence counter ions (DCC–HVCI). Journal of the American Ceramic Society, 95(11), 3415–3420.CrossRef
Xu, J., Wen, N., Li, H., et al. (2012a). Direct coagulation casting of alumina suspension by high valence counter ions using Ca(IO3)2 as coagulating agent. Journal of the American Ceramic Society, 95(8), 2525–2530
Xu, J., Wen, N., Qi, F., et al. (2012b). Direct coagulation casting of positively–charged alumina suspension by controlled release of high valence counter ions from calcium phosphate. Journal of the American Ceramic Society, 95(7), 2155–2160.CrossRef
Xu, J., Yang, M., Gan, K., et al. (2016). Reliable high strength alumina fabricated by DCC–HVCI using submicron calcium citrate complex. Ceramics International, 42, 8030–8037.CrossRef
Xu, J., Zhang, Y., Gan, K., et al. (2015b). A novel gelcasting of alumina suspension using curdlan gelation. Ceramics International, 41(9), 10520–11025.CrossRef
Xu, J., Zhang, Y., Qu, Y., et al. (2014a). Direct coagulation casting of alumina suspension from calcium citrate assisted by pH shift. Journal of the American Ceramic Society, 97(4), 1048–1053.CrossRef
Yang, J., & Huang, Y. (2010). Novel colloidal forming of ceramics. Beijing: Springer.
Yang, J., Huang, Y., Meier, L. P., et al. (2002). Direct coagulation casting via increasing ionic strength. Key Engineering Materials, 224–226, 631–636.CrossRef
Yang, J., Huang, Y., Si, W., et al. (1997b). Study on direct coagulation casting process of a–Al2O3. Journal of the Chinese Ceramic Society, 25(4), 514–519.
Yang, J., Xie, Z., & Huang, Y. (1997a). Effect of the soluble ions in the si3n4 powder on the solids volume loading of suspension. Journal of the Chinese Ceramic Society, 25(6), 679–686.
Yang, J., Xu, J., Wen, N. et al. (2011b). A method for coagulating ceramics suspension via controlled release of high valence counter ions. CN Patent 2011102914263.
Yang, J., Xu, J., Wen, N., et al. (2013). Direct coagulation casting of alumina suspension via controlled release of high valence counter ions from thermo-sensitive liposomes. Journal of the American Ceramic Society, 96(1), 62–67.CrossRef
Yang, J., Yu, J., & Huang, Y. (2011a). Recent developments in gelcasting of ceramics. Journal of the European Ceramic Society, 31(14), 2569–2591.
Yang, M., Xu, J., Gan, K., et al. (2016). Direct coagulation casting of alumina via controlled release of calcium from ammonium polyphosphate chelate complex. Journal of Materials Research and Technology, 31(1), 154–162.CrossRef
Yang, Y., & Sigmund, W. M. (2003). A new approach to prepare highly loaded aqueous alumina suspensions with temperature sensitive rheological properties. Journal of the European Ceramic Society, 23(2), 253–261.CrossRef
Yatvin, M. B., Kretz, W., Horwitz, B. A., et al. (1980). pH–sensitive liposomes: Possible clinical implications. Science, 210, 1253–1255.CrossRef
Yatvin, M. B., Weinstein, J. N., Dennis, W. H., et al. (1978). Design of liposomes for enhanced local release of drugs by hyperthermia. Science, 202, 1290–1293.CrossRef
Young, A. C., Omatete, O. O., Janney, M. A., et al. (1991). Gel–casting of alumina. Journal of the American Ceramic Society, 74(3), 612–618.CrossRef
Yu, X. R., & Hantsche, H. (1993). Vertical differential charging in monochromatized small spot X–ray photoelectron spectroscopy. Surface and Interface Analysis, 20, 555–558.CrossRef
Zhang, J. X., Jiang, D. L., Lin, Q. L., et al. (2013). Gelcasting and pressureless sintering of silicon carbide ceramics using Al2O3–Y2O3 as the sintering additives. Journal of the European Ceramic Society, 33(10), 1695–1699.CrossRef
Zhang, J. X., Jiang, D. L., Lin, Q. L., et al. (2015). Properties of silicon carbide ceramics from gelcasting and pressureless sintering. Materials and Design, 65(20), 12–16.
Zhang, J. X., Ye, F., Sun, J., et al. (2005). Aqueous processing of fine ZrO2 particles. Colloids and Surfaces A: Physicochemical and Engineering Aspects, 254, 199–205.CrossRef
Zhou, Z. W., Scales, P. J., & Boger, D. V. (2001). Chemical and physical control of the rheology of concentrated metal oxide suspensions. Chemical Engineering Science, 56(9), 2901–2920.CrossRef
Zurcher, S., & Graule, T. (2005). Influence of dispersant structure on the rheological properties of highly concentrated zirconia dispersions. Journal of the European Ceramic Society, 25, 863–873.CrossRef
Metadata
Title
Novel In-situ Coagulation Casting of Ceramic Suspensions
Authors
Prof. Jinlong Yang
Prof. Yong Huang
Copyright Year
2020
Publisher
Springer Singapore
Book
Novel Colloidal Forming of Ceramics

Print ISBN: 978-981-15-1871-3

Electronic ISBN: 978-981-15-1872-0

Copyright Year: 2020

DOI
https://doi.org/10.1007/978-981-15-1872-0_8

Premium Partners

    Image Credits