Top

Metallurgical and Materials Transactions A

Published in:

04-01-2016

Orientation Preference of Recrystallization in Supersaturated Aluminum Alloys Influenced by Concurrent Precipitation

Authors: Qinglong Zhao, Ke Huang, Yanjun Li, Knut Marthinsen

Published in: Metallurgical and Materials Transactions A | Issue 3/2016

Activate our intelligent search to find suitable subject content or patents.

search-config

AI-assisted search

Off

Abstract

The influence of concurrent precipitation on recrystallization is analyzed by comparing the nucleation and growth behavior of P ({011} 〈566〉), Cube ({001} 〈100〉), and 20 deg ND-rotated Cube ({001} 〈310〉, NDcube)-oriented grains in Al-xMn-Fe-Si (x = 0, 0.4, 1.0 wt pct) alloys. The number densities of recrystallized grains in alloys annealed at various temperatures clearly demonstrate that concurrent precipitation significantly reduces the nucleation density of recrystallization. However, this effect varies strongly with grain orientation, and the P orientation is affected less than other orientations, in particular the Cube orientation. The number fraction of P-oriented grains can increase ten times as the effect of concurrent precipitation enhances. The P- and NDcube-oriented grains grow faster than Cube grains when strong concurrent precipitation occurs. However, on the other hand, when precipitation is limited or completely absent, P grains grow more slowly than Cube (and NDcube) grains. Micro-segregation enhances the effect of concurrent precipitation, indicating that the effect is closely related to heterogeneous distribution of precipitation.

previous article Environmentally Assisted Cracking of Alloy 7050-T7451 Exposed to Aqueous Chloride Solutions

next article Grain Boundary Character Distributions in Nanocrystalline Metals Produced by Different Processing Routes

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

inform now

1. Humphreys FJ, Hatherly M : Recrystallization and Related Annealing Phenomena. Amsterdam: Elsevier; 2004.

Somerday M, Humphreys FJ: Recrystallisation behaviour of supersaturated Al–Mn alloys Part 1 – Al–13 wt%Mn. Mater Sci Technol, 2003;vol. 19, no.1, pp. 20-29.CrossRef

3. Tangen S, Sjølstad K, Furu T, Nes E : Effect of Concurrent Precipitation on Recrystallization and Evolution of the P-Texture Component in a Commercial Al-Mn Alloy. Metall Mater Trans A, 2010;vol. 41, no.11, pp. 2970-2983. doi:10.1007/s11661-010-0265-8.CrossRef

4. Benum S, Nes E : Effect of precipitation on the evolution of cube recrystallisation texture. Acta Mater, 1997;vol. 45, no.11, pp. 4593-4602. doi:10.1016/S1359-6454(97)00157-2.CrossRef

5. Huang K, Wang N, Li Y, Marthinsen K : The influence of microchemistry on the softening behaviour of two cold-rolled Al–Mn–Fe–Si alloys. Mater Sci Eng A, 2014;vol. 601, pp. 86-96. doi:10.1016/j.msea.2014.02.037.CrossRef

6. Huang K, Engler O, Li YJ, Marthinsen K : Evolution in microstructure and properties during non-isothermal annealing of a cold-rolled Al–Mn–Fe–Si alloy with different microchemistry states. Mater Sci Eng A, 2015;vol. 628, pp. 216-229. doi:10.1016/j.msea.2015.01.064.CrossRef

7. Huang K, Zhao Q, Li Y, Marthinsen K : Two-stage annealing of a cold-rolled Al–Mn–Fe–Si alloy with different microchemistry states. J Mater Process Technol, 2015;vol. 221, pp. 87-99. doi:10.1016/j.jmatprotec.2015.02.016.CrossRef

Humphreys FJ (1977) The nucleation of recrystallization at second phase particles in deformed aluminium. Acta Metall vol. 25, pp. 1323-1344. doi:10.1016/0001-6160(77)90109-2.CrossRef

Zhang Y, Juulensen D, Zhang Y, Lin F, Zhang Z, Liu Q (2012) Three-dimensional investigation of recrystallization nucleation in a particle-containing Al alloy. Scr Mater, vol. 67, no.4, pp. 320-323. doi:10.1016/j.scriptamat.2012.05.006.CrossRef

10.

10. Vatne HE, Engler O, Nes E : Influence of particles on recrystallisation textures and microstructures of aluminium alloy 3103. Mater Sci Technol, 1997;vol. 13, no.2, pp. 93-102. doi:10.1179/mst.1997.13.2.93.CrossRef

11.

11. Engler O, Vatne HE, Nes E : The roles of oriented nucleation and oriented growth on recrystallization textures in commercial purity aluminium. Mater Sci Eng A, 1996;vol. 205, no.1-2, pp. 187-198. doi:10.1016/0921-5093(95)09879-8.CrossRef

12.

12. Schäfer C, Song J, Gottstein G : Modeling of texture evolution in the deformation zone of second-phase particles. Acta Mater, 2009;vol. 57, no.4, pp. 1026-1034. doi:10.1016/j.actamat.2008.10.052.CrossRef

13.

13. Schäfer C, Gottstein G : The origin and development of the P{011}<111> orientation during recrystallization of particle-containing alloys. Int J Mater Res, 2011;vol. 102, no.09, pp. 1106-1114. doi:10.3139/146.110567.CrossRef

14.

14. Sidor JJ, Petrov RH, Kestens LAI : Modeling the crystallographic texture changes in aluminum alloys during recrystallization. Acta Mater, 2011;vol. 59, no.14, pp. 5735-5748. doi:10.1016/j.actamat.2011.05.050.CrossRef

15.

15. Sidor JJ, Decroos K, Petrov RH, Kestens LAI : Evolution of recrystallization textures in particle containing Al alloys after various rolling reductions: Experimental study and modeling. Int J Plast, 2015;vol. 66, no.0, pp. 119-137. doi:10.1016/j.ijplas.2014.08.009.CrossRef

16.

16. Nes E, Ryum N, Hunderi O : Acta Metall, 1985;vol. 33, no.1, pp. 11-22. doi:10.1016/0001-6160(85)90214-7.CrossRef

17.

17. Liu WC, Morris JG : Recrystallization textures of the M{113} 〈110〉 and P{011} 〈455〉 orientations in a supersaturated Al–Mn alloy. Scr Mater, 2007;vol. 56, no.3, pp. 217-220. doi:10.1016/j.scriptamat.2006.10.011.CrossRef

18.

18. Liu WC, Yuan H, Huang MJ : Effect of Rolling Reduction on the P {011} <455> Recrystallization Texture in a Supersaturated Al-Mn-Mg Alloy. Metall Mater Trans A, 2009;vol. 40, no.12, pp. 2794-2797. doi:10.1007/s11661-009-9998-7.CrossRef

19.

19. Zeng Q, Wen X, Zhai T : Effect of Precipitates on the Development of P Orientation {011} <566> in a Recrystallized Continuous Cast AA 3004 Aluminum Alloy after Cold Rolling. Metall Mater Trans A, 2009;vol. 40, no.10, pp. 2488-2497. doi:10.1007/s11661-009-9942-x.CrossRef

20.

20. Huang K, Li YJ, Marthinsen K : Factors affecting the strength of P{011} 〈566〉-texture after annealing of a cold-rolled Al–Mn–Fe–Si alloy. J Mater Sci, 2015;vol. 50, no.14, pp. 5091-5103. doi:10.1007/s10853-015-9063-4.CrossRef

21.

Juul Jensen D: Growth rates and misorientation relationships between growing nuclei/grains and the surrounding deformed matrix during recrystallization. Acta Metall Mater, 1995;vol. 43, pp. 4117-4129. doi:10.1016/0956-7151(95)00111-8.CrossRef

22.

Mishin OV, Juul Jensen D, Hansen N: Evolution of Microstructure and Texture during Annealing of Aluminum AA1050 Cold Rolled to High and Ultrahigh Strains. Metall Mater Trans A, 2010;vol. 41, no.11, pp. 2936-2948. doi:10.1007/s11661-010-0291-6.CrossRef

23.

Engler O: Nucleation and growth during recrystallisation of aluminium alloys investigated by local texture analysis. Mater Sci Technol, 1996;vol. 12, pp. 859-872. doi:10.1179/mst.1996.12.10.859.CrossRef

24.

24. Daaland O, Nes E : Recrystallization texture development in commercial Al-Mn-Mg alloys. Acta Mater, 1996;vol. 44, no.4, pp. 1413-1435. doi:10.1016/1359-6454(95)00290-1.CrossRef

25.

25. Zhao Q, Holmedal B, Li Y : Influence of dispersoids on microstructure evolution and work hardening of aluminium alloys during tension and cold rolling. Philos Mag, 2013;vol. 93, no.22, pp. 2995-3011. doi:10.1080/14786435.2013.794315.CrossRef

26.

26. Li YJ, Arnberg L : Quantitative study on the precipitation behavior of dispersoids in DC-cast AA3003 alloy during heating and homogenization. Acta Mater, 2003;vol. 51, no.12, pp. 3415-3428. doi:10.1016/S1359-6454(03)00160-5.CrossRef

27.

27. Zhao Q, Holmedal B : Influence of dispersoids on grain subdivision and texture evolution in aluminium alloys during cold rolling. Trans Nonferrous Met Soc China, 2014;vol. 24, pp. 2072-2078. doi:10.1016/S1003-6326(14)63314-8.CrossRef

28.

28. Truszkowski W, Krol J, Major B : On Penetration of Shear Texture into the Rolled Aluminum and Copper. Metall Trans A, 1982;vol. 13, no.4, pp. 665-669. doi:10.1007/BF02644432.CrossRef

29.

S. Bunkholt: PhD Thesis, Norwegian University of Science and Technology, Trondheim, 2013.

30.

N. Wang, J.E. Flatøy, Y. Li, and K. Marthinsen: ICAA13: 13th International Conference on Aluminum Alloys, Wiley, 2012, pp. 1837–42, DOI:10.1002/9781118495292.ch275.

31.

31. Chan HM, Humphreys FJ : The recrystallisation of aluminium-silicon alloys containing a bimodal particle distribution. Acta Metall, 1984;vol. 32, no.2, pp. 235-243. doi:10.1016/0001-6160(84)90052-X.CrossRef

32.

Juuljensen D, Hansen N, Humphreys FJ: Texture development during recrystallization of aluminium containing large particles. Acta Metall, 1985; vol. 33, pp. 2155-2162. doi:10.1016/0001-6160(85)90176-2.CrossRef

33.

F.N. Rhines and R.T. DeHoff, eds.: Quantitative Microscopy, McGraw-Hill, New York, 1968.

34.

34. Engler O, Yang P, Kong XW : On the formation of recrystallization textures in binary Al-1.3% Mn investigated by means of local texture analysis. Acta Mater, 1996;vol. 44, no.8, pp. 3349-3369. doi:10.1016/1359-6454(95)00416-5.CrossRef

35.

35. Fan GH, Zhang YB, Driver JH, Juul Jensen D : Oriented growth during recrystallization revisited in three dimensions. Scr Mater, 2014;vol. 72-73, pp. 9-12. doi:10.1016/j.scriptamat.2013.09.031.CrossRef

36.

Mishin OV, Godfrey A, Juuljensen D, Hansen N: Recovery and recrystallization in commercial purity aluminum cold rolled to an ultrahigh strain. Acta Mater, 2013;vol. 61, pp. 5354-5364. doi:10.1016/j.actamat.2013.05.024.CrossRef

Title: Orientation Preference of Recrystallization in Supersaturated Aluminum Alloys Influenced by Concurrent Precipitation
Authors: Qinglong Zhao
Ke Huang
Yanjun Li
Knut Marthinsen
Publication date: 04-01-2016
Publisher: Springer US
Published in: Metallurgical and Materials Transactions A / Issue 3/2016
Print ISSN: 1073-5623
Electronic ISSN: 1543-1940
DOI: https://doi.org/10.1007/s11661-015-3314-5

Springer Professional

Abstract

Please log in to get access to your license.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Other articles of this Issue 3/2016

Understanding the Origins of Intergranular Corrosion in Copper-Containing Al-Mg-Si Alloys

Thermodynamic Driving Force of the γ → ε Transformation and Resulting MS Temperature in High-Mn Steels

Microstructural Variations Across a Dissimilar 316L Austenitic: 9Cr Reduced Activation Ferritic Martensitic Steel Weld Joint

Structural, Optical, and Electrical Properties of Applied Amorphized and Polycrystalline Sb2S3 Thin Films

Effects of Treatment Duration and Cooling Rate on Pure Aluminum Solidification Upon Pulse Magneto-Oscillation Treatment

Identifying Deformation and Strain Hardening Behaviors of Nanoscale Metallic Multilayers Through Nano-wear Testing

Premium Partners