Top

The International Journal of Advanced Manufacturing Technology

Published in:

23-03-2020 | ORIGINAL ARTICLE

Out-of-roundness compensation technique in machining of femoral head prosthesis using conventional CNC machine

Authors: Saran Keeratihattayakorn, Pairat Tangpornprasert, Warich Prasongcharoen, Chanyaphan Virulsri

Published in: The International Journal of Advanced Manufacturing Technology | Issue 5-6/2020

Activate our intelligent search to find suitable subject content or patents.

search-config

AI-assisted search

Off

Abstract

In manufacturing of femoral head prostheses, the roundness of the femoral head is important. In order to reduce out-of-roundness when machining with a conventional CNC machine, a compensation technique with a fast tool servo was developed. The fast tool servo with piezoelectric actuator was fabricated and installed on a conventional CNC machine, and a compensation technique was implemented to compensate for the out-of-roundness. The profiles of machined femoral heads were analyzed and used to develop a representative profile. The experiment was conducted to confirm the prior statistical analysis. The results show that the compensation technique reduced the out-of-roundness of femoral head prostheses to 4.04 ± 0.54 μm.

previous article Investigation of the IN-738 superalloy microstructure and mechanical properties for the manufacturing of gas turbine engine nozzle guide vane by selective laser melting

next article Multi-scale method for recognizing damage in high-efficiency milling cutter

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

inform now

ASTM (2005) F2033 standard specification for total hip prosthesis and hip endoprosthesis bearing surfaces made of metallic, ceramic, and polymeric materials. Astm. https://doi.org/10.1520/F2033-05.2

Woronko A, Huang J, Altintas Y (2003) Piezoelectric tool actuator for precision machining on conventional CNC turning centers. Precis Eng 27(4):335–345. https://doi.org/10.1016/S0141-6359(03)00040-0 CrossRef

Xu W, Cui D, Wu Y (2016) Sphere forming mechanisms in vibration-assisted ball centreless grinding. Int J Mach Tools Manuf 108:83–94. https://doi.org/10.1016/j.ijmachtools.2016.06.004 CrossRef

Yin ZQ, Dai YF, Li SY, Guan CL, Tie GP (2011) Fabrication of off-axis aspheric surfaces using a slow tool servo. Int J Mach Tools Manuf 51(5):404–410. https://doi.org/10.1016/j.ijmachtools.2011.01.008 CrossRef

Abellán-Nebot JV, Siller HR, Vila C, Rodríguez CA (2012) An experimental study of process variables in turning operations of Ti-6Al-4V and Cr-Co spherical prostheses. Int J Adv Manuf Technol 63:887–902. https://doi.org/10.1007/s00170-012-3955-0 CrossRef

Rosenberg O, Vozny V, Sokhan C, Gawlik J, Mamalis AG, Kim DJ (2006) Trends and developments in the manufacturing of hip joints: an overview. Int J Adv Manuf Technol 27(5–6):537–542. https://doi.org/10.1007/s00170-004-2189-1 CrossRef

Zhu WH, Jun MB, Altintas Y (2001) A fast tool servo design for precision turning of shafts on conventional CNC lathes. Int J Mach Tools Manuf 41(7):953–965. https://doi.org/10.1016/S0890-6955(00)00118-8 CrossRef

Turek P, Jędrzejewski J, Modrzycki W, Engineering M (2010) Methods of machine tool error compensation. J Mach Eng 10(4):5–25. https://doi.org/10.1016/j.procir.2013.06.078 CrossRef

Yu DP, Hong GS, Wong YS (2012) Profile error compensation in fast tool servo diamond turning of micro-structured surfaces. Int J Mach Tools Manuf 52(1):13–23. https://doi.org/10.1016/j.ijmachtools.2011.08.010 CrossRef

10.

Gao W, Tano M, Araki T, Kiyono S, Park CH (2007) Measurement and compensation of error motions of a diamond turning machine. Precis Eng 31(3):310–316. https://doi.org/10.1016/j.precisioneng.2006.06.003 CrossRef

11.

Ma H, Tian J, Hu D (2013) Development of a fast tool servo in noncircular turning and its control. Mech Syst Signal Process 41(1–2):705–713. https://doi.org/10.1016/j.ymssp.2013.08.011 CrossRef

12.

Tian F, Yin Z, Li S (2015) Fast tool servo diamond turning of optical freeform surfaces for rear-view mirrors. Int J Adv Manuf Technol 80(9–12):1759–1765. https://doi.org/10.1007/s00170-015-7152-9 CrossRef

13.

Du Kim J, Kim DS (1998) Waviness compensation of precision machining by piezo-electric micro cutting device. Int J Mach Tools Manuf 38(10–11):1305–1322. https://doi.org/10.1016/S0890-6955(97)00080-1 CrossRef

14.

Beekhuis BLT, Brinksmeier E, Garbrecht M, Sölter J (2009) Improving the shape quality of bearing rings in soft turning by using a fast tool servo. Prod Eng 3:469–474. https://doi.org/10.1007/s11740-009-0175-z CrossRef

15.

Ma H, Hu D, Zhang K (2005) A fast tool feeding mechanism using piezoelectric actuators in noncircular turning. Int J Adv Manuf Technol 27:254–259. https://doi.org/10.1007/s00170-004-2168-6 CrossRef

16.

Zhu Z, To S, Zhu W-L, Huang P, Zhou X (2019) Cutting forces in fast-/slow tool servo diamond turning of micro-structured surfaces. Int J Mach Tools Manuf 136:62–75. https://doi.org/10.1016/J.IJMACHTOOLS.2018.09.003 CrossRef

17.

Zhu L, Li Z, Fang F, Huang S, Zhang X (2018) Review on fast tool servo machining of optical freeform surfaces. Int J Adv Manuf Technol 95:2071–2092. https://doi.org/10.1007/s00170-017-1271-4 CrossRef

18.

Uddin MS (2014) On the influence and optimisation of cutting parameters in finishing of metallic femoral heads of hip implants. Int J Adv Manuf Technol 73:1523–1532. https://doi.org/10.1007/s00170-014-5946-9 CrossRef

19.

Galanis NI, Manolakos DE (2010) Surface roughness prediction in turning of femoral head. Int J Adv Manuf Technol 51:79–86. https://doi.org/10.1007/s00170-010-2616-4 CrossRef

20.

Jamal M, Morgan MN, Peavoy D (2017) A digital process optimization, process design and process informatics system for high-energy abrasive mass finishing. Int J Adv Manuf Technol 92:303–319. https://doi.org/10.1007/s00170-017-0124-5 CrossRef

Title: Out-of-roundness compensation technique in machining of femoral head prosthesis using conventional CNC machine
Authors: Saran Keeratihattayakorn
Pairat Tangpornprasert
Warich Prasongcharoen
Chanyaphan Virulsri
Publication date: 23-03-2020
Publisher: Springer London
Published in: The International Journal of Advanced Manufacturing Technology / Issue 5-6/2020
Print ISSN: 0268-3768
Electronic ISSN: 1433-3015
DOI: https://doi.org/10.1007/s00170-020-05149-5

Springer Professional

Abstract

Please log in to get access to your license.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Other articles of this Issue 5-6/2020

A study on automatic fixture design using reinforcement learning

Bending process for producing uniform angle distribution from ultra-high strength steel sheets having thickness distribution

Influence of heat treatment temperature on the microstructural, mechanical, and wear behavior of 316L stainless steel fabricated by laser powder bed additive manufacturing

A comprehensive review of theory and technology of glass molding process

Additive manufacturing of CuCr1Zr by development of a gas atomization and laser powder bed fusion routine

Study on surface material removal uniformity in double side grinding based on grain trajectories

Premium Partners