Skip to main content
Disciplines
Automotive Business IT + Informatics Construction + Real Estate Electrical Engineering + Electronics Energy + Sustainability Insurance + Risk Finance + Banking Management + Leadership Marketing + Sales Mechanical Engineering + Materials
Events
DE
EN
Books
Journals
Topic Page
Marketing
Start single access now
Access for companies
EXTENDED SEARCH
Log in
Top
Published in:
Introduction Read chapter Read first chapter

2022 | OriginalPaper | Chapter

Parameters Based AE Analysis

Authors : Dimitrios G. Aggelis, Tomoki Shiotani

Published in: Acoustic Emission Testing

Publisher: Springer International Publishing

Log in

Activate our intelligent search to find suitable subject content or patents.

search-config
loading …

Abstract

The present chapter discusses the parameter-based analysis of AE. This is particularly useful in case full waveform recording is not available, or the acquisition rate is not sufficient to allow waveform streaming. Parameter analysis is based on extraction of descriptors that contain most of the waveform information, without however, the need to store the whole number of points, essentially contributing to data management. The different parameters are introduced and their relation to fracture mode as well as their use for process characterization are discussed in detail. In addition, well established indices based on the total AE activity are also discussed to demonstrate the complete arsenal of AE parametric analysis that has proven very useful to researchers and practitioners, in different material systems.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

  • über 102.000 Bücher
  • über 537 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Finance + Banking
  • Management + Führung
  • Marketing + Vertrieb
  • Maschinenbau + Werkstoffe
  • Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

  • über 67.000 Bücher
  • über 390 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Maschinenbau + Werkstoffe




 

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Wirtschaft"

Online-Abonnement

Mit Springer Professional "Wirtschaft" erhalten Sie Zugriff auf:

  • über 67.000 Bücher
  • über 340 Zeitschriften

aus folgenden Fachgebieten:

  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Finance + Banking
  • Management + Führung
  • Marketing + Vertrieb
  • Versicherung + Risiko




Jetzt Wissensvorsprung sichern!

inform now
previous chapter Sensors and Instruments
next chapter Signal-Based AE Analysis
Literature
1.
Ohtsu M (2010) Recommendations of RILEM Technical Committee 212-ACD: acoustic emission and related NDE techniques for crack detection and damage evaluation in concrete: test method for classification of active cracks in concrete structures by acoustic emission. Mater Struct 43(9):1187–1189CrossRef
2.
Philippidis TP, Nikolaidis VN, Anastassopoulos AA (1998) Damage characterization of carbon/carbon laminates using neural network techniques on AE signals. NDT & E Int 31(5):329–340CrossRef
3.
Shiotani T (2006) Evaluation of long-term stability for rock slope by means of acoustic emission technique. NDT & E Int 39:217–228CrossRef
4.
Kaiser J (1950) Untersuchung über das Auftreten von Geräuschen beim Zugversuch. PhD Thesis, Technische Hochschule Munich
5.
Fowler TJ (1977) Acoustic emission testing of fiber reinforced plastics. ASCE Fall Convention, San Francisco
6.
Waller JM, Saulsberry RL, Andrade E (2010) Use of acoustic emission to monitor progressive damage accumulation in Kevlar 49 composites. In: QNDE conference, vol 29, AIP Conf. 1211, pp 1111–1118
7.
Ono Kanji, Gallego Antolino (2012) Research and applications of AE on advanced composites. J Acoust Emission 30:180–229
8.
Aggelis DG, Dassios KG, Kordatos EZ, Matikas TE (2013) Damage accumulation in cyclically-loaded glass-ceramic matrix composites monitored by acoustic emission. Sci World J
9.
Alander P, Lassila LV, Tezvergil A, Vallittu PK (2004) Acoustic emission analysis of fiber-reinforced composite in flexural testing. Dent Mater 20(4):305–312CrossRef
10.
Kocur GK, Vogel T (2010) Classification of the damage condition of preloaded reinforced concrete slabs using parameter-based acoustic emission analysis. Construct Build Mater 24:2332–2338
11.
Luo Xiu, Haya Hiroshi, Inaba Tomoaki, Shiotani Tomoki (2006) Seismic diagnosis of railway substructures by using secondary acoustic emission. Soil Dyn Earthquake Eng 26:1101–1110CrossRef
12.
Liu Z, Ziehl P (2009) Evaluation of reinforced concrete beam specimens with acoustic emission and cyclic load test methods. ACI Struct J 106(3):288–299
13.
Hamstad MA (1986) A discussion of the basic understanding of the Felicity effect in fiber composites. J Acoustic Emission 5:95–102
14.
Shetty N, Livitsanos G, Van Roy N, Aggelis DG, Van Hemelrijck D, Wevers M, Verstrynge E (2019) Quantification of progressive structural integrity loss in masonry with Acoustic Emission-based damage classification. Constr Build Mater 194:192–204CrossRef
15.
Ohtsu M (2010) Recommendation of RILEM TC 212-ACD: acoustic emission and related NDE techniques for crack detection and damage evaluation in concrete. Test method for damage qualification of reinforced concrete beams by acoustic emission. Mater Struct 43(9):1183–1186CrossRef
16.
NDIS 2421 (2000) Recommended practice for in situ monitoring of concrete structures by acoustic emission. Japanese Society for Non-Destructive Inspection
17.
Ohtsu M, Uchida M, Okamoto T, Yuyama S (2002) Damage assessment of reinforced concrete beams qualified by acoustic emission. ACI Struct J 99(4):411–417
18.
Aggelis DG, Shiotani T, Terazawa M (2010) Assessment of construction joint effect in full-scale concrete beams by acoustic emission activity. J Eng Mech 136(7):906–912
19.
Colombo S, Forde MC, Main IG, Shigeishi M (2005) Predicting the ultimate bending capacity of concrete beams from the “relaxation ratio” analysis of AE signals. Constr Build Mater 19:746–754CrossRef
20.
Shiotani T, Aggelis DG (2007) Evaluation of repair effect for deteriorated concrete piers of intake dam using AE activity. J Acoustic Emission 25:69–79
21.
Esola S, Wisner BJ, Vanniamparambil PA, Geriguis J, Kontsos A (2018) Part qualification methodology for composite aircraft components using acoustic emission monitoring. Appl Sci 8:1490CrossRef
22.
El Batanouny MK, Ziehl PH, Larosche A, Mangual J, Matta F, Nanni A (2014) Acoustic emission monitoring for assessment of prestressed concrete beams. Construct Build Mater 58:46–53
23.
Behnia A, Chai HK, Shiotani T (2014) Advanced structural health monitoring of concrete structures with the aid of acoustic emission. Construct Build Mater 65:282–302
24.
Fowler TJ, Blessing JA, Conlisk PJ (1989) New directions in testing. In: Proceedings of the 3rd international symposium on AE from composite materials. Paris, France
25.
Golaski L, Gebski P, Ono K (2002) Diagnostics of reinforced concrete bridges by acoustic emission. J Acoustic Emission 20:83–98
26.
Shiotani T, Fujii K, Aoki T, Amou K (1994) Evaluation of progressive failure using AE sources and improved B-value on slope model tests. Progress Acoustic Emission 7:529–534
27.
Hainzl S, Fischer T (2002) Indications for a successively triggered rupture growth underlying the 2000 earthquake swarm in Vogtland/NW Bohemia. J Geophys Res 107(B12):2338
28.
Gutenberg B, Richter C (1954) Seismicity of the earth and associated phenomena. Princeton University Press, Princeton, NJ, USA
29.
Kurz JH, Finck F, Grosse CU, Reinhardt HW (2006) Stress drop and stress redistribution in concrete quantified over time by the B-value analysis. Struct Health Monitor 5:69–81CrossRef
30.
Carnì DL, Scuro C, Lamonaca F, RS Olivito, Grimaldi D (2017) Damage analysis of concrete structures by means of acoustic emissions technique. Compos B 115:79–86
31.
Vidya Sagar R, Rao MVMS (2014) An experimental study on loading rate effect on acoustic emission based b-values related to reinforced concrete fracture. Construct Build Mater 70:460–472
32.
Aggelis DG, Soulioti DV, Sapouridis N, Barkoula NM, Paipetis AS, Matikas TE (2011) Acoustic emission characterization of the fracture process in fibre reinforced concrete. Constr Build Mater 25(11):4126–4131CrossRef
33.
Eitzen DG, Wadley HNG (1984) Acoustic emission: establishing the fundamentals. J Res Natl Bureau Stand 89(1)
34.
Prosser WH (2002) Acoustic emission (Ch. 6). In: Shull PJ (ed) Nondestructive evaluation, theory, techniques and applications. Marcel Dekker, New York, pp 369–446
35.
McLaskey GC, Glaser SD (2012) Acoustic emission sensor calibration for absolute source measurements. J Nondestruct Eval 1–12
36.
Ohtsu M, Ono K (1986) The generalized theory and source representation of acoustic emission. J Acoust Emission 5:124–133
37.
Green ER (1998) Acoustic emission in composite laminates. J Nondestruct Eval 17(3):117–127CrossRef
38.
Sause MGR, Horn S (2010) Simulation of acoustic emission in planar carbon fiber reinforced plastic specimens. J Nondestr Eval 29(2):123–142CrossRef
39.
Aggelis DG (2011) Classification of cracking mode in concrete by acoustic emission parameters. Mech Res Commun 38:153–157
40.
Shahidan S, Pulin R, Muhamad Bunnori N, Holford KM (2013) Damage classification in reinforced concrete beam by acoustic emission signal analysis. Constr Build Mater 45:78–86CrossRef
41.
Pandya DH, Upadhyay SH, Harsha SP (2013) Fault diagnosis of rolling element bearing with intrinsic mode function of acoustic emission data using APF-KNN. Expert Syst Appl 40(10):4137–4145
42.
Godin N, Reynaud P, Fantozzi G (2018) Challenges and limitations in the identification of acoustic emission signature of damage mechanisms in composites materials. Appl Sci 8:1267CrossRef
43.
Baccar D, Söffker D (2015) Wear detection by means of wavelet-based acoustic emission analysis. Mech Syst Signal Process 60:198–207CrossRef
44.
Zitto ME, Piotrkowski R, Gallego A, Sagasta F, Benavent-Climent A (2015) Damage assessed by wavelet scale bands and b-value in dynamical tests of a reinforced concrete slab monitored with acoustic emission. Mech Syst Signal Process 60:75–89CrossRef
45.
Ohtsu M, Okamoto T, Yuyama S (1998) Moment tensor analysis of acoustic emission for cracking mechanisms in concrete. ACI Struct J 95(2):87–95
46.
Grosse C, Reinhardt H, Dahm T (1997) Localization and classification of fracture types in concrete with quantitative acoustic emission measurement techniques. NDT E Int 30(4):223–230CrossRef
47.
Grosse CU, Linzer LM (2008) Ch. 5 signal-based AE analysis. In: Grosse CU, Ohtsu M (eds) Acoustic emission testing, pp 53–99
48.
Ohno K, Ohtsu M (2010) Crack classification in concrete based on acoustic emission. Construct Build Mater 24(12):2339–2346
49.
Kawasaki Y, Wakuda T, Kobarai T, Ohtsu M (2013) Corrosion mechanisms in reinforced concrete by acoustic emission. Constr Build Mater 48:1240–1247CrossRef
50.
Sause M, Hamstad M (2018) Acoustic emission analysis. In: Beaumont PWR, Zweben CH (eds) Comprehensive composite materials II, vol 7. Academic Press, Oxford, pp 291–326
51.
52.
Eaton M, May M, Featherston C, Holford KM, Hallet S, Pullin R (2011) Characterisation of damage in composite structures using acoustic emission. J Phys: Conf Ser 305:012086
53.
Gresil M, Saleh MN, Soutis C (2016) Transverse crack detection in 3D angle interlock glass fibre composites using acoustic emission. Mater 9:699
54.
55.
Chandarana N, Sanchez DM, Soutis C, Gresil M (2017) Early damage detection in composites during fabrication and mechanical testing. Materials 10:685
56.
57.
58.
Kourkoulis SK, Dakanali I (2017) Pre-failure indicators detected by acoustic emission: Alfas stone, cement-mortar and cement-paste specimens under 3-point bending. Frattura ed Integrità Strutturale 40:74–84
59.
Aggelis DG, Soulioti DV, Gatselou EA, Barkoula N-M, Matikas TE (2013) Monitoring of the mechanical behavior of concrete with chemically treated steel fibers by acoustic emission. Constr Build Mater 48:1255–1260CrossRef
60.
Blom J, El Kadi M, Wastiels J, Aggelis DG (2014) Bending fracture of textile reinforced cement laminates monitored by acoustic emission: influence of aspect ratio. Constr Build Mater 70:370–378CrossRef
61.
Elfergani HA, Pullin R, Holford KM (2013) Damage assessment of corrosion in prestressed concrete by acoustic emission. Constr Build Mater 40:925–933CrossRef
62.
Livitsanos G, Shetty N, Hündgen D, Verstrynge E, Wevers M, Van Hemelrijck D, Aggelis DG (2018) Acoustic emission characteristics of fracture modes in masonry materials. Constr Build Mater 162:914–922CrossRef
63.
Saidane EH, Scida D, Assarar M, Ayad R (2017) Damage mechanisms assessment of hybrid flax-glass fibre composites using acoustic emission. Compos Struct 174:1–11CrossRef
64.
Masmoudi S, El Mahi A, Turki S (2015) Use of piezoelectric as acoustic emission sensor for in situ monitoring of composite structures. Compos B Eng 80:307–20CrossRef
65.
Gutkin R, Green C, Vangrattanachai S, Pinho S, Robinson P, Curtis P (2011) On acoustic emission for failure investigation in CFRP: pattern recognition and peak frequency analyses. Mech Syst Signal Process 25(4):1393–407CrossRef
66.
Kolanu NR, Raju G, Ramji M (2019) Damage assessment studies in CFRP composite laminate with cut-out subjected to in-plane shear loading. Compos B Eng 166:257–271
67.
Martínez-Jequier J, Gallego A, Suárez E, Juanes FJ, Valea Á (2015) Real-time damage mechanisms assessment in CFRP samples via acoustic emission Lamb wave modal analysis. Compos B Eng 68:317–326CrossRef
68.
Li L, Lomov V, Yan X, Carvelli V (2014) Cluster analysis of acoustic emission signals for 2D and 3D woven glass/epoxy composites. Compos Struct 116:286–299
69.
Godin N, Huguet S, Gaertner R (2005) Integration of the Kohonen’s self-organising map and k-means algorithm for the segmentation of the AE data collected during tensile tests on cross-ply composites. NDT E Int 38:299–309CrossRef
70.
Masmoudi S, El Mahi A, Turki S, El Guerjouma R (2014) Mechanical behavior and health monitoring by acoustic emission of unidirectional and cross-ply laminates integrated by piezoelectric implant. Appl Acoust 86:118–125CrossRef
71.
Liu PF, Chu JK, Liu YL, Zheng JY (2012) A study on the failure mechanisms of carbon fiber/epoxy composite laminates using acoustic emission. Mater Des 37:228–235CrossRef
72.
Mahdavi HR, Rahimi GH, Farrokhabadi A (2015) Failure analysis of (±55)9 filament-wound GRE pipes using acoustic emission technique. Eng Fail Anal 62:178–187CrossRef
73.
Ramirez-Jimenez CR, Papadakis N, Reynolds N, Gan TH, Purnell P, Pharaoh M (2004) Identification of failure modes in glass/polypropylene composites by means of the primary frequency content of the acoustic emission event. Compos Sci Technol 64:1819–1827CrossRef
74.
De Groot PJ, Wijnen PAM, Janssen RBF (1995) Real-time frequency determination of acoustic emission for different fracture mechanisms in carbon/epoxy composites. Compos Sci Technol 55:405–41CrossRef
75.
Nikbakht M, Yousefi J, Hosseini-Toudeshky H, Minak G (2017) Delamination evaluation of composite laminates with different interface fiber orientations using acoustic emission features and micro visualization. Compos B Eng 113:185–196CrossRef
76.
Ito K, Enoki M (2007) Acquisition and analysis of continuous acoustic emission waveform for classification of damage sources in ceramic fiber mat. Mater Trans 48(6):1221–1226
77.
Anastassopoulos AA, Philippidis TP (1995) Clustering methodology for the evaluation of acoustic emission from composites. J Acoustic Emission 13:11–22
78.
Farhidzadeh A, Mpalaskas A, Matikas TE, Farhidzadeh H, Aggelis DG (2014) Fracture mode identification in cementitious materials using supervised pattern recognition of acoustic emission features. Construct Build Mater 67:129–138CrossRef
79.
Farhidzadeh A, Salamone S, Singla P (2013) A probabilistic approach for damage identification and crack mode classification in reinforced concrete structures. J Intell Mater Syst Struct 24(14):1722–1735CrossRef
80.
Brunner AJ (2018) Identification of damage mechanisms in fiber-reinforced polymer-matrix composites with acoustic emission and the challenge of assessing structural integrity and service-life. Construct Build Mater 173:629–637CrossRef
81.
Aggelis DG, Mpalaskas AC, Ntalakas D, Matikas TE (2012) Effect of wave distortion on acoustic emission characterization of cementitious materials. Construct Build Mater 35:183–190CrossRef
82.
Aggelis DG, Tsangouri E, Van Hemelrijck D, Meccanica (2015) Influence of propagation distance on cracking and debonding acoustic emissions in externally reinforced concrete beams 50:1167–1175
83.
Aggelis DG, El Kadi M, Tysmans T, Blom J (2017) Effect of propagation distance on acoustic emission fracture mode classification in textile reinforced cement. Construct Build Mater 152:872–879CrossRef
84.
Nazerigivi A, Nejati HR, Ghazvinian A, Najigivi A (2018) Effects of SiO2 nanoparticles dispersion on concrete fracture toughness. Construct Build Mater 171:672–679
85.
Sagasta F, Benavent-Climent A, Roldán A, Gallego A (2016) Correlation of plastic strain energy and acoustic emission energy in reinforced concrete structures. Appl Sci 6:84CrossRef
86.
Landis EN, Kravchuk R, Loshkov D (2019) Experimental investigations of internal energy dissipation during fracture of fiber-reinforced ultra-high-performance concrete. Front Struct Civ Eng 13(1):190–200
87.
Shigeishi M, Colombo S, Broughton KJ, Rutledge H, Batchelor AJ, Forde MC (2001) Acoustic emission to assess and monitor the integrity of bridges. Construct Build Mater 15(1):35–49
88.
Vidya Sagar R, Raghu Prasad BK (2012) A review of recent developments in parametric based acoustic emission techniques applied to concrete structures. Nondestruct Test Eval 27(1):47–68CrossRef
89.
Vinogradov A, Máthis K (2016) Acoustic emission as a tool for exploring deformation mechanisms in magnesium and its alloys in situ. JOM 68(12):3057–3062
90.
Zhang L, Oskoe SK, Li H, Ozevin D (2018) Combined damage index to detect plastic deformation in metals using acoustic emission and nonlinear ultrasonics. Materials 11:2151CrossRef
91.
Zhang L, Ozevin D, Hardman W, Timmons A (2017) Acoustic emission signatures of fatigue damage in idealized bevel gear spline for localized sensing. Metals 7:242CrossRef
92.
Strantza M, Van Hemelrijck D, Guillaume P, Aggelis DG (2017) Acoustic emission monitoring of crack propagation in additively manufactured and conventional titanium components. Mech Res Commun 84:8–13CrossRef
93.
Aggelis DG, Kordatos EZ, Matikas TE (2011) Acoustic emission for fatigue damage characterization in metal plates. Mech Res Commun 38(2):106–110CrossRef
94.
Jianguo Y, Ziehl P, Zárate B, Caicedo J (2011) Prediction of fatigue crack growth in steel bridge components using acoustic emission. J Construct Steel Res 67(8):1254–1260CrossRef
95.
Lyasota I, Kozub B, Gawlik J (2019) Identification of the tensile damage of degraded carbon steel and ferritic alloy-steel by acoustic emission with in situ microscopic investigations. Arch Civil Mech Eng 19(1):274–285CrossRef
96.
Mahil Loo Christopher C, Sasikumar T, Suresh S (2019) Detection of crack development with Al/SiCp using tensile with online acoustic emission. J Alloys Compounds 778:951–961
97.
Rabiei A, Kim B-N, Enoki M, Kishi T (1997) A new method based on simultaneous acoustic emission and in-situ SEM observation to evaluate the fracture behavior of metal matrix composites. Scripta Materialia 37(6):801–808CrossRef
98.
Papasalouros D, Bollas K, Kourousis D, Anastasopoulos A (2016) Acoustic emission monitoring of high temperature process vessels & reactors during cool down. In: Emerging technologies in non-destructive testing VI—proceedings of the 6th international conference on emerging technologies in nondestructive testing. ETNDT 2016, pp 197–201
99.
Abdelrahman M, ElBatanouny M, Dixon K, Serrato M, Ziehl P (2018) Remote monitoring and evaluation of damage at a decommissioned nuclear facility using acoustic emission. Appl Sci 8:1663CrossRef
100.
Elizarov SV, Barat VA, Terentyev DA, Kostenko PP, Bardakov VV, Alyakritsky AL, Koltsov VG, Trofimov PN (2018) Acoustic emission monitoring of industrial facilities under static and cyclic loading. Appl Sci 8:1228CrossRef
101.
Kosnik DE (2016) Review of acoustic emission source mechanisms on large movable structures. In: Shiotani T, Wakayama S, Enoki M, Yuyama S (eds) Progress in acoustic emission XVIII. pp 447–455
102.
Shiotani T, Oshima Y, Goto M, Momoki S (2013) Temporal and spatial evaluation of grout failure process with PC cable breakage by means of acoustic emission. Construct Build Mater 48:1286–1292CrossRef
Metadata
Title
Parameters Based AE Analysis
Authors
Dimitrios G. Aggelis
Tomoki Shiotani
Copyright Year
2022
Book
Acoustic Emission Testing

Print ISBN: 978-3-030-67935-4

Electronic ISBN: 978-3-030-67936-1

Copyright Year: 2022

DOI
https://doi.org/10.1007/978-3-030-67936-1_4