Top

European Journal of Wood and Wood Products

Published in:

16-09-2022 | Original Article

Performance elevation of bamboo flour/high-density polyethylene composites by pretreating bamboo flour with mussel adhesive proteins-inspired poly(catechol/amine)

Authors: Wei Song, Shuangbao Zhang, Benhua Fei, Rongjun Zhao

Published in: European Journal of Wood and Wood Products | Issue 2/2023

Activate our intelligent search to find suitable subject content or patents.

search-config

AI-assisted search

Off

Abstract

To elevate performance of bamboo flour/high-density polyethylene (BF/HDPE) composites, poly(catechol/amine) (i.e., an adhesive material inspired by mussel adhesive proteins) treatment of BF was researched for the first time. Influence of monomer type was surveyed by applying three representative monomers, i.e., catechol/diethylenetriamine (catechol/DETA), catechol/triethylenetetramine (catechol/TETA), and catechol/tetraethylenepentamine (catechol/TEPA). All the monomers constructed poly(catechol/amine) coatings on BF. Among treated BF, poly(catechol/amine) uploading was 7.21–15.16%, which enlarged the average diameter of BF by 17.53–24.33%. After treatment, the potential of BF to interact with other substances was raised. When using different monomers, fractal dimension and specific area of BF surface were promoted by 3.58–4.31% and 14.08–16.81%, respectively; catechol/DETA and catechol/TEPA also reduced water-BF contact angle by 4.05–6.03°, and increased adhesion work by 8.50–12.69%. The treated BF showed a better interfacial bonding with HDPE, which was verified by physical–mechanical properties of composites. With the change of catechol/amine, composites made from treated BF exhibited a decrease in pore volume and 720 h water absorption by 6.71–15.49% and 42.57–46.54%, respectively, and an increase in flexural strength and distortion temperature by 13.13–23.14% and 3.60–7.30 °C, respectively. Overall, the optimal property enhancement for composites was observed in poly(catechol/TEPA) treatment.

previous article Experimental investigations on the pull-out strength of steel rods bonded in Douglas fir roundwood specimens with polymer concrete

next article Effect of steaming and furfuryl alcohol impregnation pre-treatments on the spring back, set recovery and thermal degradation of densified wood of three tropical hardwood species

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Wirtschaft"

Online-Abonnement

Mit Springer Professional "Wirtschaft" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 340 Zeitschriften

aus folgenden Fachgebieten:

Bauwesen + Immobilien
Business IT + Informatik
Finance + Banking
Management + Führung
Marketing + Vertrieb
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

inform now

Adefisan OO, McDonald AG (2019) Evaluation of the strength, sorption and thermal properties of bamboo plastic composites. Maderas Ciencia y Tecnología 21(1):3–14. https://doi.org/10.4067/S0718-221X2019005000101CrossRef

Aggarwal PK, Chauhan S, Raghu N, Karmarkar S, Shashidhar GM (2013) Mechanical properties of bio-fibers-reinforced high-density polyethylene composites: effect of coupling agents and bio-fillers. J Reinf Plast Compos 32(22):1722–1732. https://doi.org/10.1177/0731684413500545CrossRef

Bari E, Morrell JJ, Sistani A, Firoozbehi F, Haghdoost Y, Najafian M, Ghorbani A (2019) Assessment of physical and mechanical properties of bamboo–plastic composites. Polym Compos 40(7):2834–2839. https://doi.org/10.1002/pc.25097CrossRef

Du L, Li Y, Lee S, Wu Q (2014) Water absorption properties of heat-treated bamboo fiber and high density polyethylene composites. BioResources 9(1):1189–1200. https://doi.org/10.15376/biores.9.1.1189-1200CrossRef

Espert A, Vilaplana F, Karlsson S (2004) Comparison of water absorption in natural cellulosic fibres from wood and one-year crops in polypropylene composites and its influence on their mechanical properties. Compos A Appl Sci Manuf 35(11):1267–1276. https://doi.org/10.1016/j.compositesa.2004.04.004CrossRef

Feng J, Zhang H, He H, Huang X, Shi Q (2016) Effects of fungicides on mold resistance and mechanical properties of wood and bamboo flour/high-density polyethylene composites. BioResources 11(2):4069–4085. https://doi.org/10.15376/biores.11.2.4069-4085CrossRef

Guo Y, Wang L, Wang H, Chen Y, Zhu S, Chen T, Luo P (2020) Properties of bamboo flour/high-density polyethylene composites reinforced with ultrahigh molecular weight polyethylene. J Appl Polym Sci 137(33):48971. https://doi.org/10.1002/app.48971CrossRef

Han G, Lei Y, Wu Q, Kojima Y, Suzuki S (2008) Bamboo–fiber filled high density polyethylene composites: effect of coupling treatment and nanoclay. J Polym Environ 16(2):123–130. https://doi.org/10.1007/s10924-008-0094-7CrossRef

Hong G, Cheng H, Zhang S, Rojas OJ (2021) Mussel-inspired reinforcement of a biodegradable aliphatic polyester with bamboo fibers. J Clean Prod 296:126587. https://doi.org/10.1016/j.jclepro.2021.126587CrossRef

Hong G, Cheng H, Zhang S, Rojas OJ (2022) Polydopamine-treated hierarchical cellulosic fibers as versatile reinforcement of polybutylene succinate biocomposites for electromagnetic shielding. Carbohyd Polym 277:118818. https://doi.org/10.1016/j.carbpol.2021.118818CrossRef

Hu X, Chen Z, Cao Y, Chen Z, Zhang S, Song W (2019) The effect of modifier on properties of bamboo powder/high-density polyethylene composites. For Prod J 69(4):313–321. https://doi.org/10.13073/FPJ-D-19-00029CrossRef

Hung KC, Wu JH (2010) Mechanical and interfacial properties of plastic composite panels made from esterified bamboo particles. J Wood Sci 56(3):216–221. https://doi.org/10.1007/s10086-009-1090-9CrossRef

Hung KC, Chen YL, Wu JH (2012) Natural weathering properties of acetylated bamboo plastic composites. Polym Degrad Stab 97(9):1680–1685. https://doi.org/10.1016/j.polymdegradstab.2012.06.016CrossRef

Isa A, Minamino J, Mizuno H, Suzuki S, Kojima Y, Ito H, Makise R, Okamoto M, Hasegawa T (2013) Increased water resistance of bamboo flour/polyethylene composites. J Wood Chem Technol 33(3):208–216. https://doi.org/10.1080/02773813.2013.768672CrossRef

Kamal AAA, Noriman NZ, Sam ST, Al-Rashdi AA, Johari I, Razlan ZM, Shahriman AB, Zunaidi I, Khairunizam W (2019) The influences of different bamboo filler loading on tensile properties and impact strength of RHDPE/BF composites. IOP Conf Ser Mater Sci Eng 557(1):012069. https://doi.org/10.1088/1757-899X/557/1/012069CrossRef

Kong X, Yang D, Ni Y, Hao J, Guo W, Zhang L (2019) Enhanced actuation strains of rubber composites by combined covalent and noncovalent modification of TiO₂ nanoparticles. Ind Eng Chem Res 58(43):19890–19898. https://doi.org/10.1021/acs.iecr.9b03274CrossRef

Lee H, Dellatore SM, Miller WM, Messersmith PB (2007) Mussel-inspired surface chemistry for multifunctional coatings. Science 318(5849):426–430. https://doi.org/10.1126/science.1147241CrossRefPubMedPubMedCentral

Lee HA, Park E, Lee H (2020) Polydopamine and its derivative surface chemistry in material science: a focused review for studies at KAIST. Adv Mater 32(35):1907505. https://doi.org/10.1002/adma.201907505CrossRef

Liu Y, Guo Z (2015) Polydopamine-doxorubicin colloidal nanoparticles for chemo-photothermal synergistic therapy against cancer cell. Chem J Chin Univ 36(7):1389–1394. https://doi.org/10.7503/cjcu20141108CrossRef

Liu H, Wu Q, Han G, Yao F, Kojima Y, Suzuki S (2008) Compatibilizing and toughening bamboo flour-filled HDPE composites: Mechanical properties and morphologies. Compos A Appl Sci Manuf 39(12):1891–1900. https://doi.org/10.1016/j.compositesa.2008.09.011CrossRef

Lu W, Yu W, Han X, Cai H, Gao F (2022) Torrefaction pretreatment facilitated solvents-resistant and stable wood-plastic composites. Ind Crops Prod 177:114454. https://doi.org/10.1016/j.indcrop.2021.114454CrossRef

Mononen K, Jääskeläinen AS, Alvila L, Pakkanen TT, Vuorinen T (2005) Chemical changes in silver birch (Betula pendula Roth) wood caused by hydrogen peroxide bleaching and monitored by color measurement (CIELab) and UV-Vis, FTIR and UVRR spectroscopy. Holzforschung 59(4):381–388. https://doi.org/10.1515/HF.2005.063CrossRef

Mu B, Wang H, Hao X, Wang Q (2018) Morphology, mechanical properties and dimensional stability of biomass particles/high density polyethylene composites: effect of species and composition. Polymers 10(3):308. https://doi.org/10.3390/polym10030308CrossRefPubMedPubMedCentral

Qiu WZ, Wu GP, Xu ZK (2018) Robust coatings via catechol–amine codeposition: mechanism, kinetics, and application. ACS Appl Mater Interfaces 10(6):5902–5908. https://doi.org/10.1021/acsami.7b18934CrossRefPubMed

Široký J, Blackburn RS, Bechtold T, Taylor J, White P (2010) Attenuated total reflectance Fourier-transform Infrared spectroscopy analysis of crystallinity changes in lyocell following continuous treatment with sodium hydroxide. Cellulose 17(1):103–115. https://doi.org/10.1007/s10570-009-9378-xCrossRef

Song J, Yang W, Fu F, Zhang Y (2014) The effect of graphite on the water uptake, mechanical properties, morphology, and EMI shielding effectiveness of HDPE/bamboo flour composites. BioResources 9(3):3955–3967. https://doi.org/10.15376/biores.9.3.3955-3967CrossRef

Tang W, Chen C, Sun W, Wang P, Wei D (2019) Low-cost mussel inspired poly (catechol/polyamine) modified magnetic nanoparticles as a versatile platform for enhanced activity of immobilized enzyme. Int J Biol Macromol 128:814–824. https://doi.org/10.1016/j.ijbiomac.2019.01.161CrossRefPubMed

Wang H, Wu J, Cai C, Guo J, Fan H, Zhu C, Dong H, Zhao N, Xu J (2014) Mussel inspired modification of polypropylene separators by catechol/polyamine for Li-ion batteries. ACS Appl Mater Interfaces 6(8):5602–5608. https://doi.org/10.1021/am406052uCrossRefPubMed

Wang L, Shi Y, Sa R, Ning N, Wang W, Tian M, Zhang L (2016) Surface modification of aramid fibers by catechol/polyamine codeposition followed by silane grafting for enhanced interfacial adhesion to rubber matrix. Ind Eng Chem Res 55(49):12547–12556. https://doi.org/10.1021/acs.iecr.6b03177CrossRef

Wang L, Shi Y, Chen S, Wang W, Tian M, Ning N, Zhang L (2017) Highly efficient mussel-like inspired modification of aramid fibers by UV-accelerated catechol/polyamine deposition followed chemical grafting for high-performance polymer composites. Chem Eng J 314:583–593. https://doi.org/10.1016/j.cej.2016.12.015CrossRef

Wu J, Cai C, Zhou Z, Qian H, Zha F, Guo J, Feng B, He T, Zhao N, Xu J (2016) Low-cost mussel inspired poly (catechol/polyamine) coating with superior anti-corrosion capability on copper. J Colloid Interface Sci 463:214–221. https://doi.org/10.1016/j.jcis.2015.10.056CrossRefPubMed

Xiao F, Gao J, Huang X, Hu Q, Li R, Zhang X (2021) Effect of poly (methylhydrogen) siloxane modification on adjusting mechanical properties of bamboo flour-reinforced HDPE composites. Cellulose 28(9):5463–5475. https://doi.org/10.1007/s10570-021-03849-zCrossRef

Yang D, Ni Y, Kong X, Wang Y, Zhang L (2019a) A mussel-like inspired modification of BaTiO₃ nanopartciles using catechol/polyamine co-deposition and silane grafting for high-performance dielectric elastomer composites. Compos B Eng 172:621–627. https://doi.org/10.1016/j.compositesb.2019.05.101CrossRef

Yang D, Ni Y, Kong X, Xue H, Guo W, Zhang L (2019b) Enhanced electromechanical properties of natural rubber using highly efficient and cost-effective mussel-inspired modification of TiO₂ nanoparticles. Appl Surf Sci 495:143638. https://doi.org/10.1016/j.apsusc.2019.143638CrossRef

Yang D, Ni Y, Xu Y, Kong X, Feng Y, Zhang L (2019c) Nitrile-butadiene rubber composites with improved electromechanical properties obtained by modification of BaTiO₃ with co-deposited catechol/polyamine and silane grafting. Polymer 183:121813. https://doi.org/10.1016/j.polymer.2019.121813CrossRef

Zhang W, Yao X, Khanal S, Xu S (2018a) A novel surface treatment for bamboo flour and its effect on the dimensional stability and mechanical properties of high density polyethylene/bamboo flour composites. Constr Build Mater 186:1220–1227. https://doi.org/10.1016/j.conbuildmat.2018.08.003CrossRef

Zhang WP, Lu YH, Khanal S, Xu SA (2018b) Effects of compatibilizers on selected properties of HDPE composites highly filled with bamboo flour. Wood Fiber Sci 50(3):254–264. https://doi.org/10.22382/wfs-2018-026CrossRef

Zhao H, Shang Q, Yang M, Jin S, Wang YY, Zhao N, Yin X, Ding C, Xu J (2020) Surface modification of ultra-high molecular weight polyethylene fiber by catechol-tetraethylenepentamine. Acta Polym Sin 51(3):287–294. https://doi.org/10.11777/j.issn1000-3304.2019.19172CrossRef

Zhu S, Guo Y, Chen Y, Su N, Zhang K, Liu S (2016) Effects of the incorporation of nano-bamboo charcoal on the mechanical properties and thermal behavior of bamboo-plastic composites. BioResources 11(1):2684–2697. https://doi.org/10.15376/biores.11.1.2684-2697CrossRef

Title: Performance elevation of bamboo flour/high-density polyethylene composites by pretreating bamboo flour with mussel adhesive proteins-inspired poly(catechol/amine)
Authors: Wei Song
Shuangbao Zhang
Benhua Fei
Rongjun Zhao
Publication date: 16-09-2022
Publisher: Springer Berlin Heidelberg
Published in: European Journal of Wood and Wood Products / Issue 2/2023
Print ISSN: 0018-3768
Electronic ISSN: 1436-736X
DOI: https://doi.org/10.1007/s00107-022-01876-6

Springer Professional

Abstract

Please log in to get access to your license.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Wirtschaft"

Springer Professional "Technik"

Other articles of this Issue 2/2023

Identification of defects on bamboo strip surfaces based on comprehensive features

Use of NIR spectroscopy and multivariate regression for prediction of pentosan content in wood pulp

Effect of the incorporation of NaOH-treated wood aggregates on thermal and mechanical properties of plaster mortar

Experimental investigations on the pull-out strength of steel rods bonded in Douglas fir roundwood specimens with polymer concrete

Embedment behaviour of fully threaded bolts in glued laminated timber

Influence of check depth, redrying conditions of various ambient humidities, and the presence or absence of airflow on moisture trapping in surface checks of wood