Top

The International Journal of Advanced Manufacturing Technology

Published in:

18-04-2021 | ORIGINAL ARTICLE

Precision grinding of cemented carbides based on a multi-layer brazed diamond wheel using an electrolyte containing carbon nanotubes

Authors: Qiaoping Wu, Boxin Li, Zhiyong Ouyang, Guoan Mao, Linlin Wan

Published in: The International Journal of Advanced Manufacturing Technology | Issue 9-10/2021

Activate our intelligent search to find suitable subject content or patents.

search-config

AI-assisted search

Off

Abstract

Carbon nanotubes (CNTs) were added into the electrolyte to improve electrolytic dressing grinding performance of a brazed multi-layer diamond wheel containing titanium. The effect of CNTs on the electrolytic dressing performance of the grinding wheel was studied. The grinding force, residual stress, roughness and morphology of the machined surfaces were recorded in the grinding experiment of cemented carbides, and the grinding performance was evaluated based on these. The experiment results expressed that the CNTs improved the electrolytic dressing performance of the grinding wheel, which allows the worn grits to smoothly fall off and maintain the sharpness. The grinding force and residual stress were reduced when the CNTs were added into the electrolyte. Moreover, there was a grand advancement in the machined surface quality when the CNTs were used as an additive to the electrolyte. The machined surfaces produced by the brazed wheel using an electrolyteadded CNTs showed predominantly smooth grinding marks. Ductile-mode removal was predominantly observed in the grinding experiments. Adding CNTs to an electrolyte can help achieve high-precision grinding of difficult-to-cut materials with a brazed multi-layer diamond wheel.

previous article Development and characterization of green automotive brake pads from waste shells of giant African snail (Achatina achatina L.)

next article Cutting edge wear in high-speed stainless steel end milling

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

inform now

Garcia J, Cipres VC, Blomqvist A, Kaplan B (2019) Cemented carbide microstructures: a review. Int J Refract Met Hard Mater 80:40–68. https://doi.org/10.1016/j.ijrmhm.2018.12.004CrossRef

Raj DS, Karunamoorthy L (2019) Performance of cryogenically treated WC drill using tool wear measurements on the cutting edge and hole surface topography when drilling CFRP. Int J Refract Met Hard Mater 78:32–44. https://doi.org/10.1016/j.ijrmhm.2018.08.011CrossRef

Yang QM, Deng DF, Li JZ, Chen LY, Guo SD, Liu J, Chen H (2019) Fabrication and mechanical properties of WC-10Co cemented carbides with plate-like WC grains. J Alloys Compd 803:860–865. https://doi.org/10.1016/j.jallcom.2019.06.328CrossRef

Wirtz C, Dehmer A, Trauth D, Mattfeld P, Klocke F (2018) Analysis of the grinding wheel wear in dependency of the cemented carbide specification. Int J Adv Manuf Technol 99:747–754. https://doi.org/10.1007/s00170-018-2362-6CrossRef

Cruz DC, Sordi VL, Ventura CEH (2020) Surface analysis of WC-5%Co cemented tungsten carbide cutting insert after plunge-face grinding. Int J Adv Manuf Technol 108:323–330. https://doi.org/10.1007/s00170-020-05382-yCrossRef

Wu WT, Li CH, Yang M, Zhang YB, Jia DZ, Hou YL, Li RZ, Cao HJ, Han ZG (2019) Specific energy and G ratio of grinding cemented carbide under different cooling and lubrication conditions. Int J Adv Manuf Technol 105:67–82. https://doi.org/10.1007/s00170-019-04156-5CrossRef

Yin L, Spowage AC, Ramesh K, Huang H, Pickering JP, Vancoille EYJ (2004) Influence of microstructure on ultraprecision grinding of cemented carbides. Int J Mach Tools Manuf 44:533–543. https://doi.org/10.1016/j.ijmachtools.2003.10.022CrossRef

Yang J, Oden M, Johansson MP, Llanes L (2014) Grinding effects on surface integrity and mechanical strength of WC-Co cemented carbides. Procedia CIRP 13:257–263. https://doi.org/10.1016/j.procir.2014.04.044CrossRef

Wu QP, Luo Z, Wang Y, Zhao H, Zheng WJ (2018) Effect of cerium on wettability of mechanically milled Cu-based brazing alloy powder. J Rare Earths 36:1226–1233. https://doi.org/10.1016/j.jre.2018.08.001CrossRef

10.

Duan DZ, Sun L, Lin QJ, Fang XD, Li CS, Jiang ZD (2019) Effect of Cu-Ce alloy addition on the microstructure and mechanical performance of brazed diamonds with Ni-Cr alloy. Int J Refract Met Hard Mater 80:253–258. https://doi.org/10.1016/j.ijrmhm.2019.01.022CrossRef

11.

Chattopadhyay AK, Chollet L, Hintermann HE (1991) On performance of brazed bonded monolayer diamond grinding wheel. CIRP Ann 40:347–350. https://doi.org/10.1016/S0007-8506(07)62003-4CrossRef

12.

Li SS, Xu JH, Xiao B, Yan MH (2006) Performance of brazed diamond wheel in grinding cemented carbide. Mater Sci Forum 532:381–384. https://doi.org/10.4028/www.scientific.net/MSF.532-533.381CrossRef

13.

Chen JY, Shen JY, Huang H, Xu XP (2010) Grinding characteristics in high speed grinding of engineering ceramics with brazed diamond wheel. J Mater Process Technol 210:899–906. https://doi.org/10.1016/j.jmatprotec.2010.02.002CrossRef

14.

Wu QP, Ouyang ZY, Wang Y, Yang H, Song K (2019) Precision grinding of engineering ceramic based on the electrolytic dressing of a multi-layer brazed diamond wheel. Diam Relat Mater 100:1–12. https://doi.org/10.1016/j.diamond.2019.107552CrossRef

15.

Sadeghi MH, Hadad MJ, Tawakoli T, Vesali A, Emami M (2010) An investigation on surface grinding of AISI4140 hardened steel using minimum quantity lubrication-MQL technique. Int J Mater Form 3:241–251. https://doi.org/10.1007/s12289-009-0678-3CrossRef

16.

Yin SH, Ohmori H, Dai YT, Uehar Y, Chen FJ, Tang HN (2009) ELID grinding characteristics of glass-ceramic materials. Int J Mach Tool Manu 49:333–338. https://doi.org/10.1016/j.ijmachtools.2008.10.013CrossRef

17.

Islam MM, Kumar AS, Balakumar S, Lim HS, Rahman M (2008) Characterization of ELID grinding process for machining silicon wafers. J Mater Process Technol 198:281–290. https://doi.org/10.1016/j.jmatprotec.2007.06.077CrossRef

18.

Yang LJ, Ren CZ, Jin XM (2010) Experimental study of ELID grinding based on the active control of oxide layer. J Mater Process Technol 210:1748–1753. https://doi.org/10.1016/j.jmatprotec.2010.06.005CrossRef

19.

Katahira K, Ohmori H, Uehara Y (2005) Azuma M (2005) ELID grinding characteristics and surface modifying effects of aluminum nitride (AlN) ceramics. Int J Mach Tool Manu 45:891–896. https://doi.org/10.1016/j.ijmachtools.2004.10.017CrossRef

20.

Cho J, Konopka K, Rożniatowski K, García-Lecina E, Shaffer MSP, Boccaccini AR (2009) Characterization of carbon nanotube films deposited by electrophoretic deposition. Carbon 47:58–67. https://doi.org/10.1016/j.carbon.2008.08.028CrossRef

21.

Wu QP, Wang Y, Zhao H, Zheng WJ, Deng ZH (2018) Precision grinding of ultra-fine cemented carbide based on electrolytic in-process dressing of a multi-layer brazed diamond wheel. J Mech Eng 54:212–220 http://www.cjmenet.com.cn/CN/10.3901/JME.2018.21.212CrossRef

22.

Xue BX, Niu M, Yong YZ, Bai J, Song YH, Peng Y, Liu XG (2018) Multi-functional carbon microspheres with double shell layers for flame retardant poly (ethylene terephthalate). Appl Surf Sci 435:656–665. https://doi.org/10.1016/j.apsusc.2017.11.158CrossRef

23.

Li MJ, Liu CM, Xie YB, Cao HB, Zhao H, Zhang Y (2014) The evolution of surface charge on graphene oxide during the reduction and its application in electroanalysis. Carbon 66:302–311. https://doi.org/10.1016/j.carbon.2013.09.004CrossRef

24.

Zoei MS, Sadeghi MH, Salehi M (2016) Effect of grinding parameters on the wear resistance and residual stress of HVOF-deposited WC-10Co-4Cr coating. Surf Coat Technol 307:886–891. https://doi.org/10.1016/j.surfcoat.2016.09.067CrossRef

25.

Zhang KF, Ren CZ, Yang LJ, Li QF, Jin XM (2012) Precision internal grinding ofbearing steel based on the state control of oxide layer with electrolytic in-process dressing. J Mater Process Technol 212:1611–1621. https://doi.org/10.1016/j.jmatprotec.2012.02.018CrossRef

Title: Precision grinding of cemented carbides based on a multi-layer brazed diamond wheel using an electrolyte containing carbon nanotubes
Authors: Qiaoping Wu
Boxin Li
Zhiyong Ouyang
Guoan Mao
Linlin Wan
Publication date: 18-04-2021
Publisher: Springer London
Published in: The International Journal of Advanced Manufacturing Technology / Issue 9-10/2021
Print ISSN: 0268-3768
Electronic ISSN: 1433-3015
DOI: https://doi.org/10.1007/s00170-021-07044-z

Springer Professional

Abstract

Please log in to get access to your license.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Other articles of this Issue 9-10/2021

Automatic calibration of work coordinates for robotic wire and arc additive re-manufacturing with a single camera

Geometrical optimization of centerless grinding process by profiled workrest

Robotic skeleton arc additive manufacturing of aluminium alloy

Optimization of laser beam welding of steel parts made by additive manufacturing

Analytical modeling and experimental study of laser powder-fed additive manufacturing on curved substrates

Modelling and analysis of abrasive water jet cutting front profile

Premium Partners