Top

The International Journal of Advanced Manufacturing Technology

Published in:

24-08-2020 | ORIGINAL ARTICLE

Prediction model of peripheral milling surface geometry considering cutting force and vibration

Authors: Boling Yan, Lida Zhu, Changfu Liu

Published in: The International Journal of Advanced Manufacturing Technology | Issue 5-6/2020

Activate our intelligent search to find suitable subject content or patents.

search-config

AI-assisted search

Off

Abstract

Milling surface quality is an important factor to assess the performance of a product, which is usually affected by cutting parameters. This paper presents a novel model of peripheral milling surface topography considering tool vibration. The model used the idea of discretization by introducing the milling dynamics and ignored the effect of tool wear, tilting, and thermal deformation. The simulation results were verified and showed good consistence with experimental results. Afterwards, parametric analysis was conducted to investigate the impact of process parameters and showed that feed per tooth impacts most on the surface roughness while axial depth of cut has the least impact. The presented method enables researchers to predict the peripheral milling surface before processing. Moreover, the method helps to build the formula of surface roughness to conduct the parameter optimization.

previous article Numerical simulation for deformation characteristics and fracture prediction of perforated sheet in incremental sheet punching

next article Tool condition monitoring in milling process using multifractal detrended fluctuation analysis and support vector machine

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

inform now

Wojciechowski S, Twardowski P, Pelic M, Maruda RW, Barrans S (2016) Precision surface characterization for finish cylindrical milling with dynamic tool displacements model. Precis Eng 46:158–165CrossRef

Grossi N, Scippa A, Sallese L, Montevecchi F, Campatelli G (2018) International Journal of Machine Tools and Manufacture On the generation of chatter marks in peripheral milling: a spectral interpretation. Int J Mach Tools Manuf 133:31–46CrossRef

Denkena B, Krüger M, Bachrathy D, Stepan G (2012) Model based reconstruction of milled surface topography from measured cutting forces. Int J Mach Tools Manuf 54–55:25–33. https://doi.org/10.1016/j.ijmachtools.2011.12.007

Omar OEEK, El-Wardany T, Ng E, Elbestawi MA (2007) An improved cutting force and surface topography prediction model in end milling. Int J Mach Tools Manuf 47:1263–1275CrossRef

Yang D, Liu Z (2015) International Journal of Machine Tools & Manufacture Surface plastic deformation and surface topography prediction in peripheral milling with variable pitch end mill. Int J Mach Tools Manuf 91:43–53CrossRef

Cheng HD, Chen S-J, Cheng K (2011) Dynamic surface generation modeling of two-dimensional vibration-assisted micro-end-milling. Int J Adv Manuf Technol 53:1075–1079CrossRef

Arizmendi M, Campa FJ, Fernández J, López de Lacalle LN, Gil A, Bilbao E, Veiga F, Lamikiz A (2009) Model for surface topography prediction in peripheral milling considering tool vibration. CIRP Ann 58:93–96CrossRef

Arizmendi M, Jiménez A (2019) Modelling and analysis of surface topography generated in face milling operations. Int J Mech Sci 163:105061CrossRef

Liu C, He Y, Wang Y, Li Y, Wang S, Wang L, Wang Y (2019) An investigation of surface topography and workpiece temperature in whirling milling machining. Int J Mech Sci 164:105182CrossRef

10.

Zhang G, Li J, Chen Y, Huang Y, Shao X, Li M (2014) Prediction of surface roughness in end face milling based on Gaussian process regression and cause analysis considering tool vibration. Int J Adv Manuf Technol 75:1357–1370CrossRef

11.

Bolar G, Das A, Joshi SN (2018) Measurement and analysis of cutting force and product surface quality during end-milling of thin-wall components. Measurement 121:190–204CrossRef

12.

Lu X, Hu X, Jia Z, Liu M, Gao S, Qu C et al Model for the prediction of 3D surface topography and surface roughness in micro-milling Inconel 718. Int J Adv Manuf Technol 94:2043–2056

13.

Karabulut Ş (2015) Optimization of surface roughness and cutting force during AA7039/Al2O3 metal matrix composites milling using neural networks and Taguchi method. Meas J Int Meas Confed 66:139–149. https://doi.org/10.1016/j.measurement.2015.01.027

14.

Karkalos NE, Galanis NI, Markopoulos AP (2016) Surface roughness prediction for the milling of Ti – 6Al – 4V ELI alloy with the use of statistical and soft computing techniques. Measurement 90:25–35CrossRef

15.

Liu N, Wang SB, Zhang YF, Lu WF (2016) A novel approach to predicting surface roughness based on specific cutting energy consumption when slot milling Al-7075. Int J Mech Sci 118:13–20CrossRef

16.

Wan M, Liang XY, Yang Y, Zhang WH (2020) Suppressing vibrations in milling-trimming process of the plate-like workpiece by optimizing the location of vibration absorber. J Mater Process Technol 278:116499CrossRef

17.

Yuan H, Wan M, Yang Y (2019) Design of a tunable mass damper for mitigating vibrations in milling of cylindrical parts. Chinese J Aeronaut 32:748–758CrossRef

18.

Ding Y, Zhu L, Zhang X, Ding H (2010) International Journal of Machine Tools & Manufacture Short Communication A full-discretization method for prediction of milling stability. Int J Mach Tools Manuf 50:502–509CrossRef

19.

Zhang Q, Li XGH (2017) Minimum time corner transition algorithm with confined feedrate and axial acceleration for nc machining along linear tool path. Int J Adv Manuf Technol:941–956

20.

Eynian M (2015) Frequencies in stable and unstable milling. Int J Mach Tools Manuf 90:44–49CrossRef

21.

Caliskan H, Kilic ZM, Altintas Y. (2018) On-line energy-based milling chatter detection;140:1–12.

22.

Liu C, Zhu L, Ni C (2018) Chatter detection in milling process based on VMD and energy entropy. Mech Syst Signal Process 105:169–182CrossRef

Title: Prediction model of peripheral milling surface geometry considering cutting force and vibration
Authors: Boling Yan
Lida Zhu
Changfu Liu
Publication date: 24-08-2020
Publisher: Springer London
Published in: The International Journal of Advanced Manufacturing Technology / Issue 5-6/2020
Print ISSN: 0268-3768
Electronic ISSN: 1433-3015
DOI: https://doi.org/10.1007/s00170-020-05930-6

Springer Professional

Abstract

Please log in to get access to your license.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Other articles of this Issue 5-6/2020

NC machining verification algorithm based on the STL model

Modeling of shrinkage characteristics during investment casting for typical structures of hollow turbine blades

Milling performance of titanium alloy based on short electric arc machining with direct current power source

Research on deformation prediction and error compensation in precision turning of micro-shafts

Tool condition monitoring in milling process using multifractal detrended fluctuation analysis and support vector machine

Correction to: Investigation of internal defects and premature fracture of dissimilar refill friction stir spot welds of AA5754 and AA6061

Premium Partners